Hey Scott,

On Wednesday 23 June 2010 23:53:01 Scott Wood wrote:

From: Florian Fainelli florian@openwrt.org

When the NAND part is not supported, it is useful to show the manufacturer and device ID to help debugging and reporting.

Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Scott Wood scottwood@freescale.com

---

Whitespace amended to be consistent with rest of file.

Thanks, I was just about to respin it.

Applied to u-boot-nand-flash next.

drivers/mtd/nand/nand_base.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7171bdd..ed1c9c9 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2652,8 +2652,12 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, } }

• if (!type)

• if (!type) {

• printk(KERN_INFO "%s: unknown NAND device: Manufacturer ID:"
  

•        " 0x%02x, Chip ID: 0x%02x\n", __func__,
  

•        *maf_id, dev_id);
  

  return ERR_PTR(-ENODEV);

• }

  if (!mtd->name) mtd->name = type->name;