Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver where the reset was being done after the errata code instead of before.

Signed-off-by: Haiying Wang haiying.wang@freescale.com Signed-off-by: Andy Fleming afleming@freescale.com --- This one was sent to me a bit ago, but I lost it. It's going in unless there are objections. And again, sorry for the space/tab thing

drivers/tsec.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tsec.c b/drivers/tsec.c index b418773..693328d 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -1012,14 +1012,16 @@ static struct phy_info phy_info_M88E1145 = { "Marvell 88E1145", 4, (struct phy_cmd[]){ /* config */ + /* Reset the PHY */ + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + /* Errata E0, E1 */ {29, 0x001b, NULL}, {30, 0x418f, NULL}, {29, 0x0016, NULL}, {30, 0xa2da, NULL},

- /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + /* Configure the PHY */ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, {MIIM_88E1011_PHY_SCR, MIIM_88E1011_PHY_MDI_X_AUTO,