[U-Boot] [PATCH] usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ
Add Kconfig entry config option for USB_EHCI_ZYNQ and update the same to enable for all zynq boards which supports USB
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com --- - This series is based on latest mainline Changes for v2: - Moved CONFIG_USB_EHCI_ZYNQ to Kconfig and removed config ZYNQ_USB as per review comment --- configs/zynq_microzed_defconfig | 3 +++ configs/zynq_picozed_defconfig | 3 +++ configs/zynq_zc702_defconfig | 3 +++ configs/zynq_zc706_defconfig | 3 +++ configs/zynq_zed_defconfig | 3 +++ configs/zynq_zybo_defconfig | 3 +++ drivers/usb/host/Kconfig | 7 +++++++ include/configs/zynq-common.h | 4 +--- include/configs/zynq_microzed.h | 2 -- include/configs/zynq_picozed.h | 2 -- include/configs/zynq_zc70x.h | 1 - include/configs/zynq_zed.h | 2 -- include/configs/zynq_zybo.h | 1 - 13 files changed, 26 insertions(+), 11 deletions(-)
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index d88c61b..91d5c82 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -38,6 +38,9 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index aeb1270..6d3aef5 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -28,6 +28,9 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_ZYNQ_SDHCI=y CONFIG_ZYNQ_GEM=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index d68ed0e..57019da 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -43,6 +43,9 @@ CONFIG_DEBUG_UART_BASE=0xe0001000 CONFIG_DEBUG_UART_CLOCK=50000000 CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 8bd9230..e19f34f 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -39,6 +39,9 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index c70b860..6cb8a80 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -38,6 +38,9 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index 624545e..cce29bc 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -41,6 +41,9 @@ CONFIG_DEBUG_UART_BASE=0xe0001000 CONFIG_DEBUG_UART_CLOCK=50000000 CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 89580cc..202cb29 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -85,6 +85,13 @@ config USB_EHCI_MSM This driver supports combination of Chipidea USB controller and Synapsys USB PHY in host mode only.
+config USB_EHCI_ZYNQ + bool "Support for Xilinx Zynq on-chip EHCI USB controller" + depends on ARCH_ZYNQ + default n + ---help--- + Enable support for Zynq on-chip EHCI USB controller + config USB_EHCI_GENERIC bool "Support for generic EHCI USB controller" depends on OF_CONTROL diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 8dbac87..08b7602 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -86,10 +86,8 @@ # define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 #endif
-#ifdef CONFIG_ZYNQ_USB -# define CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_ZYNQ # define CONFIG_USB_STORAGE -# define CONFIG_USB_EHCI_ZYNQ # define CONFIG_EHCI_IS_TDI # define CONFIG_USB_MAX_CONTROLLER_COUNT 2
diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index ec7bb1c..e66088d 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -12,8 +12,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_USB - #include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_MICROZED_H */ diff --git a/include/configs/zynq_picozed.h b/include/configs/zynq_picozed.h index adc4d0f..f2598a2 100644 --- a/include/configs/zynq_picozed.h +++ b/include/configs/zynq_picozed.h @@ -12,8 +12,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_USB - #include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_PICOZED_H */ diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index 8a04590..a27b49c 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -12,7 +12,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_USB #define CONFIG_ZYNQ_I2C0 #define CONFIG_ZYNQ_EEPROM
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h index 150cb4a..dbb4621 100644 --- a/include/configs/zynq_zed.h +++ b/include/configs/zynq_zed.h @@ -12,8 +12,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_USB - #include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_ZED_H */ diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h index 637b1c5..ca3ad9c 100644 --- a/include/configs/zynq_zybo.h +++ b/include/configs/zynq_zybo.h @@ -13,7 +13,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_USB #define CONFIG_ZYNQ_I2C0 #define CONFIG_ZYNQ_I2C1 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
On 07/19/2016 07:11 AM, Siva Durga Prasad Paladugu wrote:
Add Kconfig entry config option for USB_EHCI_ZYNQ and update the same to enable for all zynq boards which supports USB
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com
Looks ok, except for a bit below. Michal, please double-check.
- This series is based on latest mainline
Changes for v2:
- Moved CONFIG_USB_EHCI_ZYNQ to Kconfig and removed config ZYNQ_USB as per review comment
configs/zynq_microzed_defconfig | 3 +++ configs/zynq_picozed_defconfig | 3 +++ configs/zynq_zc702_defconfig | 3 +++ configs/zynq_zc706_defconfig | 3 +++ configs/zynq_zed_defconfig | 3 +++ configs/zynq_zybo_defconfig | 3 +++ drivers/usb/host/Kconfig | 7 +++++++ include/configs/zynq-common.h | 4 +--- include/configs/zynq_microzed.h | 2 -- include/configs/zynq_picozed.h | 2 -- include/configs/zynq_zc70x.h | 1 - include/configs/zynq_zed.h | 2 -- include/configs/zynq_zybo.h | 1 - 13 files changed, 26 insertions(+), 11 deletions(-)
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index d88c61b..91d5c82 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -38,6 +38,9 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index aeb1270..6d3aef5 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -28,6 +28,9 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_ZYNQ_SDHCI=y CONFIG_ZYNQ_GEM=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index d68ed0e..57019da 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -43,6 +43,9 @@ CONFIG_DEBUG_UART_BASE=0xe0001000 CONFIG_DEBUG_UART_CLOCK=50000000 CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 8bd9230..e19f34f 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -39,6 +39,9 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index c70b860..6cb8a80 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -38,6 +38,9 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index 624545e..cce29bc 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -41,6 +41,9 @@ CONFIG_DEBUG_UART_BASE=0xe0001000 CONFIG_DEBUG_UART_CLOCK=50000000 CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 89580cc..202cb29 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -85,6 +85,13 @@ config USB_EHCI_MSM This driver supports combination of Chipidea USB controller and Synapsys USB PHY in host mode only.
+config USB_EHCI_ZYNQ
- bool "Support for Xilinx Zynq on-chip EHCI USB controller"
- depends on ARCH_ZYNQ
- default n
- ---help---
Enable support for Zynq on-chip EHCI USB controllerconfig USB_EHCI_GENERIC bool "Support for generic EHCI USB controller" depends on OF_CONTROL diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 8dbac87..08b7602 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -86,10 +86,8 @@ # define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 #endif
-#ifdef CONFIG_ZYNQ_USB -# define CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_ZYNQ # define CONFIG_USB_STORAGE -# define CONFIG_USB_EHCI_ZYNQ # define CONFIG_EHCI_IS_TDI # define CONFIG_USB_MAX_CONTROLLER_COUNT 2
How much of the stuff in this ifdef can be turned into Kconfig options ? I believe some of it is already Kconfig-ied.
diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index ec7bb1c..e66088d 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -12,8 +12,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_USB
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_MICROZED_H */ diff --git a/include/configs/zynq_picozed.h b/include/configs/zynq_picozed.h index adc4d0f..f2598a2 100644 --- a/include/configs/zynq_picozed.h +++ b/include/configs/zynq_picozed.h @@ -12,8 +12,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_USB
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_PICOZED_H */ diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index 8a04590..a27b49c 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -12,7 +12,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_USB #define CONFIG_ZYNQ_I2C0 #define CONFIG_ZYNQ_EEPROM
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h index 150cb4a..dbb4621 100644 --- a/include/configs/zynq_zed.h +++ b/include/configs/zynq_zed.h @@ -12,8 +12,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_USB
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_ZED_H */ diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h index 637b1c5..ca3ad9c 100644 --- a/include/configs/zynq_zybo.h +++ b/include/configs/zynq_zybo.h @@ -13,7 +13,6 @@
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ZYNQ_USB #define CONFIG_ZYNQ_I2C0 #define CONFIG_ZYNQ_I2C1 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
On 20.7.2016 03:38, Marek Vasut wrote:
On 07/19/2016 07:11 AM, Siva Durga Prasad Paladugu wrote:
Add Kconfig entry config option for USB_EHCI_ZYNQ and update the same to enable for all zynq boards which supports USB
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com
Looks ok, except for a bit below. Michal, please double-check.
Sure.
- This series is based on latest mainline
Changes for v2:
- Moved CONFIG_USB_EHCI_ZYNQ to Kconfig and removed config ZYNQ_USB as per review comment
configs/zynq_microzed_defconfig | 3 +++ configs/zynq_picozed_defconfig | 3 +++ configs/zynq_zc702_defconfig | 3 +++ configs/zynq_zc706_defconfig | 3 +++ configs/zynq_zed_defconfig | 3 +++ configs/zynq_zybo_defconfig | 3 +++ drivers/usb/host/Kconfig | 7 +++++++ include/configs/zynq-common.h | 4 +--- include/configs/zynq_microzed.h | 2 -- include/configs/zynq_picozed.h | 2 -- include/configs/zynq_zc70x.h | 1 - include/configs/zynq_zed.h | 2 -- include/configs/zynq_zybo.h | 1 - 13 files changed, 26 insertions(+), 11 deletions(-)
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index d88c61b..91d5c82 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -38,6 +38,9 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index aeb1270..6d3aef5 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -28,6 +28,9 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_ZYNQ_SDHCI=y CONFIG_ZYNQ_GEM=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index d68ed0e..57019da 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -43,6 +43,9 @@ CONFIG_DEBUG_UART_BASE=0xe0001000 CONFIG_DEBUG_UART_CLOCK=50000000 CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 8bd9230..e19f34f 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -39,6 +39,9 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index c70b860..6cb8a80 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -38,6 +38,9 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index 624545e..cce29bc 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -41,6 +41,9 @@ CONFIG_DEBUG_UART_BASE=0xe0001000 CONFIG_DEBUG_UART_CLOCK=50000000 CONFIG_ZYNQ_QSPI=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI=y +CONFIG_USB_EHCI_ZYNQ=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 89580cc..202cb29 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -85,6 +85,13 @@ config USB_EHCI_MSM This driver supports combination of Chipidea USB controller and Synapsys USB PHY in host mode only.
+config USB_EHCI_ZYNQ
- bool "Support for Xilinx Zynq on-chip EHCI USB controller"
- depends on ARCH_ZYNQ
- default n
Marek: Maybe make sense to have this as y if there is dependency on ARCH_ZYNQ. It will shorten defconfigs.
- ---help---
Enable support for Zynq on-chip EHCI USB controllerconfig USB_EHCI_GENERIC bool "Support for generic EHCI USB controller" depends on OF_CONTROL diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 8dbac87..08b7602 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -86,10 +86,8 @@ # define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 #endif
-#ifdef CONFIG_ZYNQ_USB -# define CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_ZYNQ # define CONFIG_USB_STORAGE -# define CONFIG_USB_EHCI_ZYNQ # define CONFIG_EHCI_IS_TDI # define CONFIG_USB_MAX_CONTROLLER_COUNT 2
How much of the stuff in this ifdef can be turned into Kconfig options ? I believe some of it is already Kconfig-ied.
USB_STORAGE yes. It can/should be done in the follow up patch which goes via my tree.
Thanks, Michal
participants (3)
-
Marek Vasut -
Michal Simek -
Siva Durga Prasad Paladugu