From: Sylvain Lemieux slemieux@tycoint.com

Incorporate NAND SLC hardware ECC support from legacy LPCLinux NXP BSP. The code taken from the legacy patch is: - lpc32xx SLC NAND driver (hardware ECC support) - lpc3250 header file missing SLC NAND registers definition

The legacy driver was updated and clean-up as part of the integration with the existing NAND SLC driver.

Signed-off-by: Sylvain Lemieux slemieux@tycoint.com --- Changes from v6 to v7: * Rebase the patch on: https://patchwork.ozlabs.org/patch/506182/ * Addressed Vladimir's comments on LPC32xx NAND SLC driver: - The ECC size / bytes are always define for a single step. * Provide a custom version of the hardware ECC "read_page()" and "write_page()" to be able to take advantage of the DMA controller scatter/gather mode through linked list.

Changes from v5 to v6: * Addressed Vladimir's comments on LPC32xx NAND SLC driver: - move DMAC registers definitions from NAND SLC to "dma.h". - update NAND SLC to use the new DMA channel API. - generate the fatal BUG on the client side when attempting a transfer on an unallocated DMA channel. - kept the original order for read/write byte/buf functions. * Following feedback on maillist from Vladimir, the following update were done: - the ECC size / ECC bytes are fix to 256 & 3 in the driver. - add comments regarding the ECC correction done by page when using the DMA controller scatter/gather mode through linked list (i.e. ECC correction process). - definition used for managing small vs. large page were updated inside the driver to make them more clear. - definition used for the ECC process when the DMA is enable were updated to avoid any confusion with basic definition. - possible to select small page NAND using a single define. - use define instead of value for internal process logic.

Changes from v4 to v5: * Addressed Marek's comments on LPC32xx NAND SLC driver: - Move macro use by the DMA client to write the next DMA linked list item address to NAND SLC driver. * Updated multiline comments style. * Use "uxx" instead of "uintxx_t" (new code), note: keep uintxx_t for API; to match initial patch.

Changes from v3 to v4: * No changes.

Changes from v2 to v3: * As per feedback on mailing list from Vladimir, - add warning when DMA and SPL build option are selected. - add another DMA specific read and write buffer functions. * Addressed Marek's comments on LPC32xx NAND SLC driver removed typecast and update variable type, when possible. * As per discussion on mailing list with Vladimir & Marek, updated conditional compile option (DMA only) to build the original NAND SLC code using software ECC. * Re-organized the conditional compile code inside "board_nand_init()" - DMA vs. non-DMA initialization. * Added original source code credit (copyright & author).

Changes from v1 to v2: * Moved the NAND SLC patch as the second patch of the series. * As per discussion on mailing list with Vladimir, incorporate NAND SLC hardware ECC support into the following NAND SLC patch: https://patchwork.ozlabs.org/patch/497308/ * As per discussion on mailing list with Vladimir & Albert, add conditional compile option to build the original NAND SLC code using software ECC for SPL build. * Removed ECC layout for small page NAND from this patch.

Update to the legacy code to integrate with the NAND SLC patch: 1) Fixed checkpatch script output in legacy code. 2) Use u-boot API for register access to remove the volatile in register definition taken from "lpc3250.h" header file. 3) Use register definition from the NAND SLC patch.

The legacy BSP patch (u-boot-2009.03_lpc32x0-v1.07.patch.tar.bz2) was downloaded from the LPCLinux Web site.

drivers/mtd/nand/lpc32xx_nand_slc.c | 413 +++++++++++++++++++++++++++++++++++- 1 file changed, 409 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/lpc32xx_nand_slc.c b/drivers/mtd/nand/lpc32xx_nand_slc.c index 719a74d..dbb95d9 100644 --- a/drivers/mtd/nand/lpc32xx_nand_slc.c +++ b/drivers/mtd/nand/lpc32xx_nand_slc.c @@ -3,15 +3,29 @@ * * (C) Copyright 2015 Vladimir Zapolskiy vz@mleia.com * + * Hardware ECC support original source code + * Copyright (C) 2008 by NXP Semiconductors + * Author: Kevin Wells + * + * Copyright (c) 2015 Tyco Fire Protection Products. + * * SPDX-License-Identifier: GPL-2.0+ */

#include <common.h> #include <nand.h> +#include <linux/mtd/nand_ecc.h> #include <asm/errno.h> #include <asm/io.h> +#include <asm/arch/config.h> #include <asm/arch/clk.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/dma.h> +#include <asm/arch/cpu.h> + +#if defined(CONFIG_DMA_LPC32XX) && defined(CONFIG_SPL_BUILD) +#warning "DMA support in SPL image is not tested" +#endif

struct lpc32xx_nand_slc_regs { u32 data; @@ -33,11 +47,18 @@ struct lpc32xx_nand_slc_regs {

/* CFG register */ #define CFG_CE_LOW (1 << 5) +#define CFG_DMA_ECC (1 << 4) /* Enable DMA ECC bit */ +#define CFG_ECC_EN (1 << 3) /* ECC enable bit */ +#define CFG_DMA_BURST (1 << 2) /* DMA burst bit */ +#define CFG_DMA_DIR (1 << 1) /* DMA write(0)/read(1) bit */

/* CTRL register */ #define CTRL_SW_RESET (1 << 2) +#define CTRL_ECC_CLEAR (1 << 1) /* Reset ECC bit */ +#define CTRL_DMA_START (1 << 0) /* Start DMA channel bit */

/* STAT register */ +#define STAT_DMA_FIFO (1 << 2) /* DMA FIFO has data bit */ #define STAT_NAND_READY (1 << 0)

/* INT_STAT register */ @@ -54,6 +75,30 @@ struct lpc32xx_nand_slc_regs { #define TAC_R_HOLD(n) (max_t(uint32_t, (n), 0xF) << 4) #define TAC_R_SETUP(n) (max_t(uint32_t, (n), 0xF) << 0)

+#if defined(CONFIG_DMA_LPC32XX) +#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE) + +/* + * DMA Descriptors + * For Large Block: 17 descriptors = ((16 Data and ECC Read) + 1 Spare Area) + * For Small Block: 5 descriptors = ((4 Data and ECC Read) + 1 Spare Area) + */ +static struct lpc32xx_dmac_ll dmalist[ECCSTEPS * 2 + 1]; +static u32 ecc_buffer[8]; /* MAX ECC size */ +static unsigned int dmachan = (unsigned int)-1; /* Invalid channel */ + +/* + * Helper macro for the DMA client (i.e. NAND SLC): + * - to write the next DMA linked list item address + * (see arch/include/asm/arch-lpc32xx/dma.h). + * - to assign the DMA data register to DMA source or destination address. + * - to assign the ECC register to DMA source or destination address. + */ +#define lpc32xx_dmac_next_lli(x) ((u32)x) +#define lpc32xx_dmac_set_dma_data() ((u32)&lpc32xx_nand_slc_regs->dma_data) +#define lpc32xx_dmac_set_ecc() ((u32)&lpc32xx_nand_slc_regs->ecc) +#endif + static struct lpc32xx_nand_slc_regs __iomem *lpc32xx_nand_slc_regs = (struct lpc32xx_nand_slc_regs __iomem *)SLC_NAND_BASE;

@@ -108,28 +153,353 @@ static int lpc32xx_nand_dev_ready(struct mtd_info *mtd) return readl(&lpc32xx_nand_slc_regs->stat) & STAT_NAND_READY; }

+#if defined(CONFIG_DMA_LPC32XX) +/* + * Prepares DMA descriptors for NAND RD/WR operations + * If the size is < 256 Bytes then it is assumed to be + * an OOB transfer + */ +static void lpc32xx_nand_dma_configure(struct nand_chip *chip, + const u8 *buffer, int size, + int read) +{ + u32 i, dmasrc, ctrl, ecc_ctrl, oob_ctrl, dmadst; + struct lpc32xx_dmac_ll *dmalist_cur; + struct lpc32xx_dmac_ll *dmalist_cur_ecc; + + /* + * CTRL descriptor entry for reading ECC + * Copy Multiple times to sync DMA with Flash Controller + */ + ecc_ctrl = 0x5 | + DMAC_CHAN_SRC_BURST_1 | + DMAC_CHAN_DEST_BURST_1 | + DMAC_CHAN_SRC_WIDTH_32 | + DMAC_CHAN_DEST_WIDTH_32 | + DMAC_CHAN_DEST_AHB1; + + /* CTRL descriptor entry for reading/writing Data */ + ctrl = (CONFIG_SYS_NAND_ECCSIZE / 4) | + DMAC_CHAN_SRC_BURST_4 | + DMAC_CHAN_DEST_BURST_4 | + DMAC_CHAN_SRC_WIDTH_32 | + DMAC_CHAN_DEST_WIDTH_32 | + DMAC_CHAN_DEST_AHB1; + + /* CTRL descriptor entry for reading/writing Spare Area */ + oob_ctrl = (CONFIG_SYS_NAND_OOBSIZE / 4) | + DMAC_CHAN_SRC_BURST_4 | + DMAC_CHAN_DEST_BURST_4 | + DMAC_CHAN_SRC_WIDTH_32 | + DMAC_CHAN_DEST_WIDTH_32 | + DMAC_CHAN_DEST_AHB1; + + if (read) { + dmasrc = lpc32xx_dmac_set_dma_data(); + dmadst = (u32)buffer; + ctrl |= DMAC_CHAN_DEST_AUTOINC; + } else { + dmadst = lpc32xx_dmac_set_dma_data(); + dmasrc = (u32)buffer; + ctrl |= DMAC_CHAN_SRC_AUTOINC; + } + + /* + * Write Operation Sequence for Small Block NAND + * ---------------------------------------------------------- + * 1. X'fer 256 bytes of data from Memory to Flash. + * 2. Copy generated ECC data from Register to Spare Area + * 3. X'fer next 256 bytes of data from Memory to Flash. + * 4. Copy generated ECC data from Register to Spare Area. + * 5. X'fer 16 byets of Spare area from Memory to Flash. + * Read Operation Sequence for Small Block NAND + * ---------------------------------------------------------- + * 1. X'fer 256 bytes of data from Flash to Memory. + * 2. Copy generated ECC data from Register to ECC calc Buffer. + * 3. X'fer next 256 bytes of data from Flash to Memory. + * 4. Copy generated ECC data from Register to ECC calc Buffer. + * 5. X'fer 16 bytes of Spare area from Flash to Memory. + * Write Operation Sequence for Large Block NAND + * ---------------------------------------------------------- + * 1. Steps(1-4) of Write Operations repeate for four times + * which generates 16 DMA descriptors to X'fer 2048 bytes of + * data & 32 bytes of ECC data. + * 2. X'fer 64 bytes of Spare area from Memory to Flash. + * Read Operation Sequence for Large Block NAND + * ---------------------------------------------------------- + * 1. Steps(1-4) of Read Operations repeate for four times + * which generates 16 DMA descriptors to X'fer 2048 bytes of + * data & 32 bytes of ECC data. + * 2. X'fer 64 bytes of Spare area from Flash to Memory. + */ + + for (i = 0; i < size/CONFIG_SYS_NAND_ECCSIZE; i++) { + dmalist_cur = &dmalist[i * 2]; + dmalist_cur_ecc = &dmalist[(i * 2) + 1]; + + dmalist_cur->dma_src = (read ? (dmasrc) : (dmasrc + (i*256))); + dmalist_cur->dma_dest = (read ? (dmadst + (i*256)) : dmadst); + dmalist_cur->next_lli = lpc32xx_dmac_next_lli(dmalist_cur_ecc); + dmalist_cur->next_ctrl = ctrl; + + dmalist_cur_ecc->dma_src = lpc32xx_dmac_set_ecc(); + dmalist_cur_ecc->dma_dest = (u32)&ecc_buffer[i]; + dmalist_cur_ecc->next_lli = + lpc32xx_dmac_next_lli(&dmalist[(i * 2) + 2]); + dmalist_cur_ecc->next_ctrl = ecc_ctrl; + } + + if (i) { /* Data only transfer */ + dmalist_cur_ecc = &dmalist[(i * 2) - 1]; + dmalist_cur_ecc->next_lli = 0; + dmalist_cur_ecc->next_ctrl |= DMAC_CHAN_INT_TC_EN; + return; + } + + /* OOB only transfer */ + if (read) { + dmasrc = lpc32xx_dmac_set_dma_data(); + dmadst = (u32)buffer; + oob_ctrl |= DMAC_CHAN_DEST_AUTOINC; + } else { + dmadst = lpc32xx_dmac_set_dma_data(); + dmasrc = (u32)buffer; + oob_ctrl |= DMAC_CHAN_SRC_AUTOINC; + } + + /* Read/ Write Spare Area Data To/From Flash */ + dmalist_cur = &dmalist[i * 2]; + dmalist_cur->dma_src = dmasrc; + dmalist_cur->dma_dest = dmadst; + dmalist_cur->next_lli = 0; + dmalist_cur->next_ctrl = (oob_ctrl | DMAC_CHAN_INT_TC_EN); +} + +static void lpc32xx_nand_xfer(struct mtd_info *mtd, const u8 *buf, + int len, int read) +{ + struct nand_chip *chip = mtd->priv; + u32 config; + int ret; + + /* DMA Channel Configuration */ + config = (read ? DMAC_CHAN_FLOW_D_P2M : DMAC_CHAN_FLOW_D_M2P) | + (read ? DMAC_DEST_PERIP(0) : DMAC_DEST_PERIP(DMA_PERID_NAND1)) | + (read ? DMAC_SRC_PERIP(DMA_PERID_NAND1) : DMAC_SRC_PERIP(0)) | + DMAC_CHAN_ENABLE; + + /* Prepare DMA descriptors */ + lpc32xx_nand_dma_configure(chip, buf, len, read); + + /* Setup SLC controller and start transfer */ + if (read) + setbits_le32(&lpc32xx_nand_slc_regs->cfg, CFG_DMA_DIR); + else /* NAND_ECC_WRITE */ + clrbits_le32(&lpc32xx_nand_slc_regs->cfg, CFG_DMA_DIR); + setbits_le32(&lpc32xx_nand_slc_regs->cfg, CFG_DMA_BURST); + + /* Write length for new transfers */ + if (!((readl(&lpc32xx_nand_slc_regs->stat) & STAT_DMA_FIFO) | + readl(&lpc32xx_nand_slc_regs->tc))) { + int tmp = (len != mtd->oobsize) ? mtd->oobsize : 0; + writel(len + tmp, &lpc32xx_nand_slc_regs->tc); + } + + setbits_le32(&lpc32xx_nand_slc_regs->ctrl, CTRL_DMA_START); + + /* Start DMA transfers */ + ret = lpc32xx_dma_start_xfer(dmachan, dmalist, config); + if (unlikely(ret < 0)) + BUG(); + + + /* Wait for NAND to be ready */ + while (!lpc32xx_nand_dev_ready(mtd)) + ; + + /* Wait till DMA transfer is DONE */ + if (lpc32xx_dma_wait_status(dmachan)) + pr_err("NAND DMA transfer error!\r\n"); + + /* Stop DMA & HW ECC */ + clrbits_le32(&lpc32xx_nand_slc_regs->ctrl, CTRL_DMA_START); + clrbits_le32(&lpc32xx_nand_slc_regs->cfg, + CFG_DMA_DIR | CFG_DMA_BURST | CFG_ECC_EN | CFG_DMA_ECC); +} + +static u32 slc_ecc_copy_to_buffer(u8 *spare, const u32 *ecc, int count) +{ + int i; + for (i = 0; i < (count * CONFIG_SYS_NAND_ECCBYTES); + i += CONFIG_SYS_NAND_ECCBYTES) { + u32 ce = ecc[i / CONFIG_SYS_NAND_ECCBYTES]; + ce = ~(ce << 2) & 0xFFFFFF; + spare[i+2] = (u8)(ce & 0xFF); ce >>= 8; + spare[i+1] = (u8)(ce & 0xFF); ce >>= 8; + spare[i] = (u8)(ce & 0xFF); + } + return 0; +} + +static int lpc32xx_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat, + uint8_t *ecc_code) +{ + return slc_ecc_copy_to_buffer(ecc_code, ecc_buffer, ECCSTEPS); +} + +/* + * Enables and prepares SLC NAND controller + * for doing data transfers with H/W ECC enabled. + */ +static void lpc32xx_hwecc_enable(struct mtd_info *mtd, int mode) +{ + /* Clear ECC */ + writel(CTRL_ECC_CLEAR, &lpc32xx_nand_slc_regs->ctrl); + + /* Setup SLC controller for H/W ECC operations */ + setbits_le32(&lpc32xx_nand_slc_regs->cfg, CFG_ECC_EN | CFG_DMA_ECC); +} + +/* + * lpc32xx_correct_data - [NAND Interface] Detect and correct bit error(s) + * mtd: MTD block structure + * dat: raw data read from the chip + * read_ecc: ECC from the chip + * calc_ecc: the ECC calculated from raw data + * + * Detect and correct a 1 bit error for 256 byte block + */ +int lpc32xx_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ + unsigned int i; + int ret1, ret2 = 0; + u_char *r = read_ecc; + u_char *c = calc_ecc; + u16 data_offset = 0; + + for (i = 0 ; i < ECCSTEPS ; i++) { + r += CONFIG_SYS_NAND_ECCBYTES; + c += CONFIG_SYS_NAND_ECCBYTES; + data_offset += CONFIG_SYS_NAND_ECCSIZE; + + ret1 = nand_correct_data(mtd, dat + data_offset, r, c); + if (ret1 < 0) + return -EBADMSG; + else + ret2 += ret1; + } + + return ret2; +} +#endif + +#if defined(CONFIG_DMA_LPC32XX) +static void lpc32xx_dma_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + lpc32xx_nand_xfer(mtd, buf, len, 1); +} +#else static void lpc32xx_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { while (len-- > 0) *buf++ = readl(&lpc32xx_nand_slc_regs->data); } +#endif

static uint8_t lpc32xx_read_byte(struct mtd_info *mtd) { return readl(&lpc32xx_nand_slc_regs->data); }

+#if defined(CONFIG_DMA_LPC32XX) +static void lpc32xx_dma_write_buf(struct mtd_info *mtd, const uint8_t *buf, + int len) +{ + lpc32xx_nand_xfer(mtd, buf, len, 0); +} +#else static void lpc32xx_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { while (len-- > 0) writel(*buf++, &lpc32xx_nand_slc_regs->data); } +#endif

static void lpc32xx_write_byte(struct mtd_info *mtd, uint8_t byte) { writel(byte, &lpc32xx_nand_slc_regs->data); }

+#if defined(CONFIG_DMA_LPC32XX) +/* Reuse the logic from "nand_read_page_hwecc()" */ +static int lpc32xx_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + int i; + int stat; + uint8_t *p = buf; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; + uint32_t *eccpos = chip->ecc.layout->eccpos; + unsigned int max_bitflips = 0; + + /* + * As per the "LPC32x0 and LPC32x0/01 User manual" table 173 notes + * and section 9.7, the NAND SLC & DMA allowed single DMA transaction + * of a page size using DMA controller scatter/gather mode through + * linked list; the ECC read is done without any software intervention. + */ + + lpc32xx_hwecc_enable(mtd, NAND_ECC_READ); + lpc32xx_dma_read_buf(mtd, p, chip->ecc.size * chip->ecc.steps); + lpc32xx_ecc_calculate(mtd, p, &ecc_calc[0]); + lpc32xx_dma_read_buf(mtd, chip->oob_poi, mtd->oobsize); + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + stat = chip->ecc.correct(mtd, p, &ecc_code[0], &ecc_calc[0]); + if (stat < 0) + mtd->ecc_stats.failed++; + else { + mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } + + return max_bitflips; +} + +/* Reuse the logic from "nand_write_page_hwecc()" */ +static int lpc32xx_write_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + int i; + uint8_t *ecc_calc = chip->buffers->ecccalc; + const uint8_t *p = buf; + uint32_t *eccpos = chip->ecc.layout->eccpos; + + /* + * As per the "LPC32x0 and LPC32x0/01 User manual" table 173 notes + * and section 9.7, the NAND SLC & DMA allowed single DMA transaction + * of a page size using DMA controller scatter/gather mode through + * linked list; the ECC read is done without any software intervention. + */ + + lpc32xx_hwecc_enable(mtd, NAND_ECC_WRITE); + lpc32xx_dma_write_buf(mtd, p, chip->ecc.size * chip->ecc.steps); + lpc32xx_ecc_calculate(mtd, p, &ecc_calc[0]); + + for (i = 0; i < chip->ecc.total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + + lpc32xx_dma_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} +#endif + /* * LPC32xx has only one SLC NAND controller, don't utilize * CONFIG_SYS_NAND_SELF_INIT to be able to reuse this function @@ -137,10 +507,46 @@ static void lpc32xx_write_byte(struct mtd_info *mtd, uint8_t byte) */ int board_nand_init(struct nand_chip *lpc32xx_chip) { +#if defined(CONFIG_DMA_LPC32XX) + int ret; + + /* Acquire a channel for our use */ + ret = lpc32xx_dma_get_channel(); + if (unlikely(ret < 0)) { + pr_info("Unable to get free DMA channel for NAND transfers\n"); + return -1; + } + dmachan = (unsigned int)ret; +#endif + lpc32xx_chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl; lpc32xx_chip->dev_ready = lpc32xx_nand_dev_ready;

/* + * The implementation of these functions is quite common, but + * they MUST be defined, because access to data register + * is strictly 32-bit aligned. + */ + lpc32xx_chip->read_byte = lpc32xx_read_byte; + lpc32xx_chip->write_byte = lpc32xx_write_byte; + +#if defined(CONFIG_DMA_LPC32XX) + /* Hardware ECC calculation is supported when DMA driver is selected */ + lpc32xx_chip->ecc.mode = NAND_ECC_HW; + + lpc32xx_chip->read_buf = lpc32xx_dma_read_buf; + lpc32xx_chip->write_buf = lpc32xx_dma_write_buf; + + lpc32xx_chip->ecc.calculate = lpc32xx_ecc_calculate; + lpc32xx_chip->ecc.correct = lpc32xx_correct_data; + lpc32xx_chip->ecc.hwctl = lpc32xx_hwecc_enable; + lpc32xx_chip->chip_delay = 2000; + + lpc32xx_chip->ecc.read_page = lpc32xx_read_page_hwecc; + lpc32xx_chip->ecc.write_page = lpc32xx_write_page_hwecc; + lpc32xx_chip->options |= NAND_NO_SUBPAGE_WRITE; +#else + /* * Hardware ECC calculation is not supported by the driver, * because it requires DMA support, see LPC32x0 User Manual, * note after SLC_ECC register description (UM10326, p.198) @@ -153,16 +559,15 @@ int board_nand_init(struct nand_chip *lpc32xx_chip) * is strictly 32-bit aligned. */ lpc32xx_chip->read_buf = lpc32xx_read_buf; - lpc32xx_chip->read_byte = lpc32xx_read_byte; lpc32xx_chip->write_buf = lpc32xx_write_buf; - lpc32xx_chip->write_byte = lpc32xx_write_byte; +#endif

/* * Use default ECC layout, but these values are predefined * for both small and large page NAND flash devices. */ - lpc32xx_chip->ecc.size = 256; - lpc32xx_chip->ecc.bytes = 3; + lpc32xx_chip->ecc.size = CONFIG_SYS_NAND_ECCSIZE; + lpc32xx_chip->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; lpc32xx_chip->ecc.strength = 1;

#if defined(CONFIG_SYS_NAND_USE_FLASH_BBT)