B&R boards are using Phy Addresses 'one' and 'two', prior this was defined through #define PHYADDR 1 within a header file. Now this is addresses are given with device-driver structure.

Signed-off-by: Hannes Petermaier oe5hpm@oevsv.at --- board/BuR/common/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c index 04f3f1f..4c926ce 100644 --- a/board/BuR/common/common.c +++ b/board/BuR/common/common.c @@ -141,12 +141,12 @@ static struct cpsw_slave_data cpsw_slaves[] = { { .slave_reg_ofs = 0x208, .sliver_reg_ofs = 0xd80, - .phy_addr = 0, + .phy_addr = 1, }, { .slave_reg_ofs = 0x308, .sliver_reg_ofs = 0xdc0, - .phy_addr = 1, + .phy_addr = 2, }, };