I2C clocks are not initialized by the SBL, so lets add support for clocks required by both of the QUP I2C controllers.

BLSP1 AHB clock is already initialized by SBL, but QUP I2C driver is requesting it so we have to add it to the enable list.

Based off QCS404 clock driver.

Signed-off-by: Robert Marko robert.marko@sartura.hr --- drivers/clk/qcom/clock-ipq4019.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)

diff --git a/drivers/clk/qcom/clock-ipq4019.c b/drivers/clk/qcom/clock-ipq4019.c index fca7626ada..73dbd25811 100644 --- a/drivers/clk/qcom/clock-ipq4019.c +++ b/drivers/clk/qcom/clock-ipq4019.c @@ -16,6 +16,12 @@

#include "clock-qcom.h"

+/* I2C controller clock control registerss */ +#define BLSP1_QUP1_I2C_APPS_CBCR (0x2008) +#define BLSP1_QUP1_I2C_APPS_CMD_RCGR (0x200C) +#define BLSP1_QUP2_I2C_APPS_CBCR (0x3010) +#define BLSP1_QUP2_I2C_APPS_CMD_RCGR (0x3000) + static ulong ipq4019_clk_set_rate(struct clk *clk, ulong rate) { switch (clk->id) { @@ -29,7 +35,22 @@ static ulong ipq4019_clk_set_rate(struct clk *clk, ulong rate)

static int ipq4019_clk_enable(struct clk *clk) { + struct msm_clk_priv *priv = dev_get_priv(clk->dev); + switch (clk->id) { + case GCC_BLSP1_AHB_CLK: + /* This clock is already initialized by SBL1 */ + return 0; + case GCC_BLSP1_QUP1_I2C_APPS_CLK: + clk_enable_cbc(priv->base + BLSP1_QUP1_I2C_APPS_CBCR); + clk_rcg_set_rate(priv->base, BLSP1_QUP1_I2C_APPS_CMD_RCGR, 0, + CFG_CLK_SRC_CXO); + return 0; + case GCC_BLSP1_QUP2_I2C_APPS_CLK: + clk_enable_cbc(priv->base + BLSP1_QUP2_I2C_APPS_CBCR); + clk_rcg_set_rate(priv->base, BLSP1_QUP2_I2C_APPS_CMD_RCGR, 0, + CFG_CLK_SRC_CXO); + return 0; case GCC_BLSP1_QUP1_SPI_APPS_CLK: /*SPI1*/ /* This clock is already initialized by SBL1 */ return 0;