This patch adds support for the Embest SBC2440-II Board.

Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have any s3c2400 or s3c2410 boards but need this patch applying before I can submit patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no new warnings or errors were found.

Signed-off-by: Kevin Morfitt kevin.morfitt@fearnside-systems.co.uk --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/embest/sbc2440ii/Makefile | 55 +++++++ board/embest/sbc2440ii/config.mk | 25 +++ board/embest/sbc2440ii/lowlevel_init.S | 219 +++++++++++++++++++++++++++ board/embest/sbc2440ii/sbc2440ii.c | 122 +++++++++++++++ cpu/arm920t/s3c24x0/timer.c | 1 + include/configs/sbc2440ii.h | 254 ++++++++++++++++++++++++++++++++ 9 files changed, 684 insertions(+), 0 deletions(-) create mode 100644 board/embest/sbc2440ii/Makefile create mode 100644 board/embest/sbc2440ii/config.mk create mode 100644 board/embest/sbc2440ii/lowlevel_init.S create mode 100644 board/embest/sbc2440ii/sbc2440ii.c create mode 100644 include/configs/sbc2440ii.h

diff --git a/MAINTAINERS b/MAINTAINERS index d70a9d2..65f8dfe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -638,6 +638,10 @@ Nishanth Menon nm@ti.com omap3_sdp3430 ARM CORTEX-A8 (OMAP3xx SoC) omap3_zoom1 ARM CORTEX-A8 (OMAP3xx SoC)

+Kevin Morfitt kevin.morfitt@fearnside-systems.co.uk + + sbc2440ii ARM920T + David Müller d.mueller@elsoft.ch

smdk2410 ARM920T diff --git a/MAKEALL b/MAKEALL index 5492d8f..c84b23e 100755 --- a/MAKEALL +++ b/MAKEALL @@ -552,6 +552,7 @@ LIST_ARM9=" \ openrd_base \ rd6281a \ sbc2410x \ + sbc2440ii \ scb9328 \ sheevaplug \ smdk2400 \ diff --git a/Makefile b/Makefile index b91b1c0..a6619e5 100644 --- a/Makefile +++ b/Makefile @@ -3020,6 +3020,9 @@ rd6281a_config: unconfig sbc2410x_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0

+sbc2440ii_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t sbc2440ii embest s3c24x0 + scb9328_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx

diff --git a/board/embest/sbc2440ii/Makefile b/board/embest/sbc2440ii/Makefile new file mode 100644 index 0000000..26237a2 --- /dev/null +++ b/board/embest/sbc2440ii/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Modified for EMBEST SBC2440-II board with S3C2440 (ARM920T) cpu by: +# (C) Copyright 2009 +# Kevin Morfitt, Fearnside Systems Ltd, kevin.morfitt@fearnside-systems.co.uk +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := sbc2440ii.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/embest/sbc2440ii/config.mk b/board/embest/sbc2440ii/config.mk new file mode 100644 index 0000000..def11d8 --- /dev/null +++ b/board/embest/sbc2440ii/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, gj@denx.de +# David Mueller, ELSOFT AG, d.mueller@elsoft.ch +# +# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu +# +# see http://www.samsung.com/ for more information on SAMSUNG +# +# Modified for EMBEST SBC2440-II board with S3C2440 (ARM920T) cpu by: +# (C) Copyright 2009 +# Kevin Morfitt, Fearnside Systems Ltd, kevin.morfitt@fearnside-systems.co.uk + +# +# SBC2440-II has 1 bank of 64 MB DRAM +# +# 3000'0000 to 3800'0000 +# +# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 +# +# we load ourself to 33F8'0000 +# +# download area is 3000'0000 + +TEXT_BASE = 0x33F80000 diff --git a/board/embest/sbc2440ii/lowlevel_init.S b/board/embest/sbc2440ii/lowlevel_init.S new file mode 100644 index 0000000..95f49f8 --- /dev/null +++ b/board/embest/sbc2440ii/lowlevel_init.S @@ -0,0 +1,219 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Modified for the Samsung SMDK2410 by + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, d.mueller@elsoft.ch + * + * Modified for the friendly-arm SBC-2410X by + * (C) Copyright 2005 + * JinHua Luo, GuangDong Linux Center, luo.jinhua@gd-linux.com + * + * Modified for the Embest SBC2440-II by + * (C) Copyright 2009 + * Kevin Morfitt, Fearnside Systems Ltd, kevin.morfitt@fearnside-systems.co.uk + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + +/* + * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S + * + * Copyright (C) 2002 Samsung Electronics SW.LEE hitchcar@sec.samsung.com + */ + +#define BWSCON 0x48000000 + +#define DW8 (0x0) +#define DW16 (0x1) +#define DW32 (0x2) +#define WAIT (0x1 << 2) +#define UBLB (0x1 << 3) + +#define B1_BWSCON (DW16) +#define B2_BWSCON (DW16) +#define B3_BWSCON (DW16 + WAIT + UBLB) +#define B4_BWSCON (DW16) +#define B5_BWSCON (DW16) +#define B6_BWSCON (DW32) +#define B7_BWSCON (DW32) +#define BWSCON_VAL ((B1_BWSCON << 4) + (B2_BWSCON << 8) + \ + (B3_BWSCON << 12) + (B4_BWSCON << 16) + \ + (B5_BWSCON << 20) + (B6_BWSCON << 24) + \ + (B7_BWSCON << 28)) + +#define B0_TACS 0x0 +#define B0_TCOS 0x0 +#define B0_TACC 0x7 +#define B0_TCOH 0x0 +#define B0_TAH 0x0 +#define B0_TACP 0x0 +#define B0_PMC 0x0 +#define BANKCON0_VAL ((B0_TACS << 13) + (B0_TCOS << 11) + (B0_TACC << 8) + \ + (B0_TCOH << 6) + (B0_TAH << 4) + (B0_TACP << 2) + \ + B0_PMC) + +#define B1_TACS 0x0 +#define B1_TCOS 0x0 +#define B1_TACC 0x7 +#define B1_TCOH 0x0 +#define B1_TAH 0x0 +#define B1_TACP 0x0 +#define B1_PMC 0x0 +#define BANKCON1_VAL ((B1_TACS << 13) + (B1_TCOS << 11) + (B1_TACC << 8) + \ + (B1_TCOH << 6) + (B1_TAH << 4) + (B1_TACP << 2) + \ + B1_PMC) + +#define B2_TACS 0x0 +#define B2_TCOS 0x0 +#define B2_TACC 0x7 +#define B2_TCOH 0x0 +#define B2_TAH 0x0 +#define B2_TACP 0x0 +#define B2_PMC 0x0 +#define BANKCON2_VAL ((B2_TACS << 13) + (B2_TCOS << 11) + (B2_TACC << 8) + \ + (B2_TCOH << 6) + (B2_TAH << 4) + (B2_TACP << 2) + \ + B2_PMC) + +#define B3_TACS 0x0 /* 0clk */ +#define B3_TCOS 0x3 /* 4clk */ +#define B3_TACC 0x7 /* 14clk */ +#define B3_TCOH 0x1 /* 1clk */ +#define B3_TAH 0x3 /* 4clk */ +#define B3_TACP 0x3 /* 6clk */ +#define B3_PMC 0x0 /* 16data */ +#define BANKCON3_VAL ((B3_TACS << 13) + (B3_TCOS << 11) + (B3_TACC << 8) + \ + (B3_TCOH << 6) + (B3_TAH << 4) + (B3_TACP << 2) + \ + B3_PMC) + +#define B4_TACS 0x0 +#define B4_TCOS 0x0 +#define B4_TACC 0x7 +#define B4_TCOH 0x0 +#define B4_TAH 0x0 +#define B4_TACP 0x0 +#define B4_PMC 0x0 +#define BANKCON4_VAL ((B4_TACS << 13) + (B4_TCOS << 11) + (B4_TACC << 8) + \ + (B4_TCOH << 6) + (B4_TAH << 4) + (B4_TACP << 2) + \ + B4_PMC) + +#define B5_TACS 0x0 +#define B5_TCOS 0x0 +#define B5_TACC 0x7 +#define B5_TCOH 0x0 +#define B5_TAH 0x0 +#define B5_TACP 0x0 +#define B5_PMC 0x0 +#define BANKCON5_VAL ((B5_TACS << 13) + (B5_TCOS << 11) + (B5_TACC << 8) + \ + (B5_TCOH << 6) + (B5_TAH << 4) + (B5_TACP << 2) + \ + B5_PMC) + +#define B6_MT 0x3 /* SDRAM */ +#define B6_TRCD 0x2 +#define B6_SCAN 0x1 /* 9bit */ +#define BANKCON6_VAL ((B6_MT << 15) + (B6_TRCD << 2) + B6_SCAN) + +#define B7_MT 0x3 /* SDRAM */ +#define B7_TRCD 0x2 /* 4clk */ +#define B7_SCAN 0x1 /* 9bit */ +#define BANKCON7_VAL ((B7_MT << 15) + (B7_TRCD << 2) + B7_SCAN) + +/* REFRESH parameter */ +#define REFEN 0x1 /* Refresh enable */ +#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ +#define TRP 0x0 /* 2clk */ +#define TRC 0x3 /* 7clk */ +#define TCHR 0x2 /* 3clk */ +#define REFCNT 1259 +#define REFRESH_VAL ((REFEN << 23) + (TREFMD << 22) + (TRP << 20) + \ + (TRC << 18) + (TCHR << 16) + REFCNT) + +/* BANKSIZE parameter */ +#define BURST_EN 1 /* Enable burst mode */ +#define SCKE_EN 1 /* Enable SDRAM power-down mode */ +#define SCLK_EN 1 /* SCLK is active only during the access */ +#define BK67MAP 2 /* 128M/128M */ +#define BANKSIZE_VAL ((BURST_EN << 7) + (SCKE_EN << 5) + \ + (SCLK_EN << 4) + BK67MAP) + +/* MRSRB6 parameter */ +#define WBL6 0 /* Burst */ +#define TM6 0 /* Modem register set */ +#define CL6 3 /* Latency is 3 clocks */ +#define BT6 0 /* Sequential */ +#define BL6 0 +#define MRSRB6_VAL ((WBL6 << 9) + (TM6 << 7) + (CL6 << 4) + \ + (BT6 << 3) + BL6) + +/* MRSRB7 parameter */ +#define WBL7 0 /* Burst */ +#define TM7 0 /* Modem register set */ +#define CL7 3 /* Latency is 3 clocks */ +#define BT7 0 /* Sequential */ +#define BL7 0 +#define MRSRB7_VAL ((WBL7 << 9) + (TM7 << 7) + (CL7 << 4) + \ + (BT7 << 3) + BL7) + +/**************************************/ + +_TEXT_BASE: + .word TEXT_BASE + +.globl lowlevel_init +lowlevel_init: + /* memory control configuration */ + /* make r0 relative the current location so that it */ + /* reads SMRDATA out of FLASH rather than memory ! */ + ldr r0, =SMRDATA + ldr r1, _TEXT_BASE + sub r0, r0, r1 + ldr r1, =BWSCON /* Bus Width Status Controller */ + add r2, r0, #13*4 +0: + ldr r3, [r0], #4 + str r3, [r1], #4 + cmp r2, r0 + bne 0b + + /* everything is fine now */ + mov pc, lr + + .ltorg +/* the literal pools origin */ + +SMRDATA: + .word BWSCON_VAL + .word BANKCON0_VAL + .word BANKCON1_VAL + .word BANKCON2_VAL + .word BANKCON3_VAL + .word BANKCON4_VAL + .word BANKCON5_VAL + .word BANKCON6_VAL + .word BANKCON7_VAL + .word REFRESH_VAL + .word BANKSIZE_VAL + .word MRSRB6_VAL + .word MRSRB7_VAL diff --git a/board/embest/sbc2440ii/sbc2440ii.c b/board/embest/sbc2440ii/sbc2440ii.c new file mode 100644 index 0000000..7c793e9 --- /dev/null +++ b/board/embest/sbc2440ii/sbc2440ii.c @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger mgroeger@sysgo.de + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, d.mueller@elsoft.ch + * + * (C) Copyright 2005 + * JinHua Luo, GuangDong Linux Center, luo.jinhua@gd-linux.com + * + * Modified for the Embest SBC2440-II by + * (C) Copyright 2009 + * Kevin Morfitt, Fearnside Systems Ltd, kevin.morfitt@fearnside-systems.co.uk + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <s3c2440.h> +#include <asm/io.h> +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Miscellaneous platform dependent initialisations + */ + +static inline void pll_settle_delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" "bne 1b" : + "=r" (loops) : "0"(loops)); +} + +int board_init(void) +{ + struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); + struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); + + /* to reduce PLL lock time, adjust the LOCKTIME register */ + writel(0xFFFFFFFF, &clk_power->LOCKTIME); + + /* configure UPLL */ + writel((CONFIG_SYS_U_MDIV << 12) + (CONFIG_SYS_U_PDIV << 4) + + CONFIG_SYS_U_SDIV, &clk_power->UPLLCON); + + /* some delay between UPLL and MPLL */ + pll_settle_delay(8000); + + /* configure MPLL */ + writel((CONFIG_SYS_M_MDIV << 12) + (CONFIG_SYS_M_PDIV << 4) + + CONFIG_SYS_M_SDIV, &clk_power->MPLLCON); + + /* configure the GPIO */ + writel(CONFIG_SYS_GPACON, &gpio->GPACON); + writel(CONFIG_SYS_GPBCON, &gpio->GPBCON); + writel(CONFIG_SYS_GPBUP, &gpio->GPBUP); + writel(CONFIG_SYS_GPBDAT, &gpio->GPBDAT); + writel(CONFIG_SYS_GPCCON, &gpio->GPCCON); + writel(CONFIG_SYS_GPCUP, &gpio->GPCUP); + writel(CONFIG_SYS_GPDCON, &gpio->GPDCON); + writel(CONFIG_SYS_GPDUP, &gpio->GPDUP); + writel(CONFIG_SYS_GPECON, &gpio->GPECON); + writel(CONFIG_SYS_GPEUP, &gpio->GPEUP); + writel(CONFIG_SYS_GPFCON, &gpio->GPFCON); + writel(CONFIG_SYS_GPFUP, &gpio->GPFUP); + writel(CONFIG_SYS_GPGCON, &gpio->GPGCON); + writel(CONFIG_SYS_GPGUP, &gpio->GPGUP); + writel(CONFIG_SYS_GPHCON, &gpio->GPHCON); + writel(CONFIG_SYS_GPHUP, &gpio->GPHUP); + writel(CONFIG_SYS_GPJCON, &gpio->GPJCON); + writel(CONFIG_SYS_GPJUP, &gpio->GPJUP); + writel(CONFIG_SYS_EXTINT0, &gpio->EXTINT0); + writel(CONFIG_SYS_EXTINT1, &gpio->EXTINT1); + writel(CONFIG_SYS_EXTINT2, &gpio->EXTINT2); + writel(CONFIG_SYS_EINTMASK, &gpio->EINTMASK); + + /* arch number of SBC2440-II Board */ + gd->bd->bi_arch_number = MACH_TYPE_SBC2440II; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_CS8900 + rc = cs8900_initialize(0, CONFIG_CS8900_BASE); +#endif + return rc; +} +#endif diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c index 2ee1518..bbe4c07 100644 --- a/cpu/arm920t/s3c24x0/timer.c +++ b/cpu/arm920t/s3c24x0/timer.c @@ -180,6 +180,7 @@ ulong get_tbclk(void) #if defined(CONFIG_SMDK2400) || defined(CONFIG_TRAB) tbclk = timer_load_val * 100; #elif defined(CONFIG_SBC2410X) || \ + defined(CONFIG_SBC2440II) || \ defined(CONFIG_SMDK2410) || \ defined(CONFIG_VCMA9) tbclk = CONFIG_SYS_HZ; diff --git a/include/configs/sbc2440ii.h b/include/configs/sbc2440ii.h new file mode 100644 index 0000000..7ac36cf --- /dev/null +++ b/include/configs/sbc2440ii.h @@ -0,0 +1,254 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger mgroeger@sysgo.de + * Gary Jennejohn gj@denx.de + * David Mueller d.mueller@elsoft.ch + * + * Modified for the friendly-arm SBC-2410X by + * (C) Copyright 2005 + * JinHua Luo, GuangDong Linux Center, luo.jinhua@gd-linux.com + * + * Modified for the Embest SBC2440-II by + * (C) Copyright 2009 + * Kevin Morfitt, Fearnside Systems Ltd, kevin.morfitt@fearnside-systems.co.uk + * + * Configuation settings for the friendly-arm SBC-2410X board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_IDENT_STRING " for Embest SBC2440-II" + +/* If we are developing, we might want to start armboot from ram + so we MUST NOT initialize critical regs like mem-timing ... */ +#undef CONFIG_SKIP_LOWLEVEL_INIT /* undef for developing */ + +/* High Level Configuration Options (easy to change) */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24X0 type of SoC */ +#define CONFIG_S3C2440 1 /* specifically, a SAMSUNG S3C2440 SoC*/ +#define CONFIG_SBC2440II 1 /* on an Embest SBC-2440-II Board */ +#define CONFIG_DO_ARCH_PRE_LOWLEVEL_INIT + +/* input clock of PLL - the SBC2440-II has 12MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 12000000 + +/* The PLL values for MPLL = 400MHz, UPLL = 48MHz + The clock frequency ratios are set to 1:4:8 ie: + PCLK = 50MHz + HCLK = 100MHz + FCLK = 400MHz + */ +/* The MPLL values. */ +#define CONFIG_SYS_M_MDIV 0x5C +#define CONFIG_SYS_M_PDIV 1 +#define CONFIG_SYS_M_SDIV 1 + +/* The UPLL values. */ +#define CONFIG_SYS_U_MDIV 0x38 +#define CONFIG_SYS_U_PDIV 2 +#define CONFIG_SYS_U_SDIV 2 + +/* We don't need the MMU or interrupts. */ +#undef USE_920T_MMU +#undef CONFIG_USE_IRQ + +/* The GPIO configuration */ +#define CONFIG_SYS_GPACON 0x007FFFFF +#define CONFIG_SYS_GPBCON 0x00055555 +#define CONFIG_SYS_GPBUP 0x000007FF +#define CONFIG_SYS_GPBDAT 0x000001C0 /* Switch on LED1. */ +#define CONFIG_SYS_GPCCON 0xAAAAAAAA +#define CONFIG_SYS_GPCUP 0x0000FFFF +#define CONFIG_SYS_GPDCON 0xAAAAAAAA +#define CONFIG_SYS_GPDUP 0x0000FFFF +#define CONFIG_SYS_GPECON 0xAAAAA800 +#define CONFIG_SYS_GPEUP 0x00001FFF +#define CONFIG_SYS_GPFCON 0x000055AA +#define CONFIG_SYS_GPFUP 0x000000FF +#define CONFIG_SYS_GPGCON 0xFD95FFBA +#define CONFIG_SYS_GPGUP 0x0000FFFF +#define CONFIG_SYS_GPHCON 0x0002FAAA +#define CONFIG_SYS_GPHUP 0x000007FF +#define CONFIG_SYS_GPJCON 0x02FAAAAA +#define CONFIG_SYS_GPJUP 0x00001FFF +#define CONFIG_SYS_EXTINT0 0x22222222 +#define CONFIG_SYS_EXTINT1 0x22222222 +#define CONFIG_SYS_EXTINT2 0x22222222 +#define CONFIG_SYS_EINTMASK 0x00FFFFF0 + +/* + * Hardware drivers + */ +#define CONFIG_CS8900 1 /* we have a CS8900 on-board */ +#define CONFIG_CS8900_BASE 0x19000300 +#define CONFIG_CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ + +/* Serial console configuration */ +#define CONFIG_S3C24X0_SERIAL +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SBC2440-II */ +#define CONFIG_BAUDRATE 115200 +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* RTC */ +#define CONFIG_RTC_S3C24X0 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration. */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_JFFS2_NAND +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nand0=sbc2440-II-nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=sbc2440-II-nand:2m(kernel),62m(rootfs)" +#define CONFIG_EXTRA_ENV_SETTINGS "autostart=yes" +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS \ +"noinitrd root=/dev/mtdblock1 rootfstype=jffs2 init=/linuxrc console=ttySAC0" +#define CONFIG_LOADADDR 30008000 +#define CONFIG_BOOTCOMMAND "nboot 30008000 0 0" + +/* kgdb settings */ +#if defined(CONFIG_CMD_KGDB) + #define CONFIG_KGDB_BAUDRATE 115200 + #define CONFIG_KGDB_SER_INDEX 1 +#endif + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "[ SBC2440-II ]# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_MEMTEST_START 0x30000000 +#define CONFIG_SYS_MEMTEST_END 0x33F00000 +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_HZ 1000 + +/* Stack sizes */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ + #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ + #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_LOAD_ADDR 0x33000000 /* default load address */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* FLASH and environment and organization */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define PHYS_FLASH_SIZE 0x00200000 /* 2MB */ +#define CONFIG_SYS_MAX_FLASH_SECT (35) +#define CONFIG_ENV_ADDR \ + (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE - CONFIG_ENV_SIZE) + +/* FLASH driver setup */ +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 + +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) + +/* NAND flash settings */ +#if defined(CONFIG_CMD_NAND) + #define CONFIG_NAND_S3C2410 + #define CONFIG_SYS_NAND_BASE 0x4e00000c + #define CONFIG_SYS_MAX_NAND_DEVICE 1 + #define SECTORSIZE 512 + #define CONFIG_S3C2410_NAND_HWECC + #define CONFIG_SYS_NAND_LARGEPAGE + #define CONFIG_SYS_NAND_TACLS 0 + #define CONFIG_SYS_NAND_TWRPH0 3 + #define CONFIG_SYS_NAND_TWRPH1 1 +#endif + +/* Kernel boot argument config. */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_TAG + +/* USB settings */ +#define CONFIG_USB_STORAGE 1 +#define CONFIG_CMD_USB 1 +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x49000000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "sbc2440-II" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_CMD_FAT 1 + +/*----------------------------------------------------------------------- + * Enable network + */ +#define CONFIG_NET_MULTI + +/* Other settings. */ +#define CONFIG_SYS_64BIT_VSPRINTF +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#ifdef CONFIG_CMDLINE_EDITING + #undef CONFIG_AUTO_COMPLETE +#else + #define CONFIG_AUTO_COMPLETE +#endif + +#endif /* __CONFIG_H */