[U-Boot-Users] MX31 patch: boot code
Hi,
I'm having a look at the patches you released for MX31 processor. In particular I'm comparing the early boot code with the one provided by Freescale along with Redboot. If I did not miss something, I noted that some of the initializations performed by Freescale (AIPS, MAX, M3IF etc.) are not implemented in your code. Am I right? If yes, do you think these are not strictly necessary?
Thanks in advance, llandre
DAVE Electronics System House - R&D Department web: http://www.dave-tech.it email: r&d2@dave-tech.it
On Tue, Nov 13, 2007 at 05:55:28PM +0100, llandre wrote:
I'm having a look at the patches you released for MX31 processor. In particular I'm comparing the early boot code with the one provided by Freescale along with Redboot. If I did not miss something, I noted that some of the initializations performed by Freescale (AIPS, MAX, M3IF etc.) are not implemented in your code. Am I right? If yes, do you think these are not strictly necessary?
We started with bringing up the board in a very minmal way, so it will probably not initialize it completely.
Robert
participants (2)
-
llandre -
Robert Schwebel