OK, thank you, this was the answer I was seeking.

I'll try a different card reader.

The one I have right now registered somehow as a SCSI device.

Thanks,

Matt

-----Original Message----- From: wd@denx.de [mailto:wd@denx.de] Sent: Thursday, March 08, 2007 9:40 AM To: Matt Gessner Cc: Ulf Samuelsson; u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] USB storage support question

In message 131AF8573CF31945B5B11E4201D3F1E142BB58@mail3.Avidyne.com

you

wrote:

...

My question is more along the lines of: what storage devices work on this interface, and what configuration flags (other than the ones I reported I set) are necessary to make those work?

It implements support for the Mass Storage Device class.

...

Does it handle hard drives? Flash drives? What disk formats? FAT (tried it and it didn't work)? FAT32 (tried it and it didn't work)?

It should work with all compatible mass storage devices - disk, memory sticks, all sorts of memory cards interfaced through a compatible card reader, etc. Note that not all devices actually follow the USB specs, so some of this simple don't work.

Best regards,

Wolfgang Denk

-- DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk Office: Kirchenstr. 5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de It is the quality rather than the quantity that matters.

• Lucius Annaeus Seneca (4 B.C. - A.D. 65)