X-EYOU-SPAMVALUE:100 X-EYOU-DEALDRC: X-Auth-Info: zjvJMUdItuLN4XakZSaDhHT7x1SrUScONjZbUp+td5M= X-Auth-Info: zjvJMUdItuLN4XakZSaDhHT7x1SrUScONjZbUp+td5M= cc: u-boot-users@lists.sourceforge.net from: wolfgang denk wd@denx.de Date: Fri, 21 Apr 2006 00:08:06 +0200 Sender: wd@denx.de

Hello,

in message 200604191447.k3JElKhT003105@opentech.lzu.edu.cn you wrote:

...

I have a TQM866M board here, and it seems that the ID that this board is using is not checked for in cpu/mpc8xx/cpu.c - not sure if this patch is usable - but it fixes the problem of indentifying the right CPU for me

Any chance that you use old code?

This is supposed to be solved by this commit:

commit 7b4fd36b0322ec98836a8459d9be80e2777fdc05 tree 92deb9ddf1153c64ff1ced9392816e60b4ecaa03 parent 0a112d8696dcffdf87a7066e2dade1eacbdd80d9 author Wolfgang Denk wd@atlas.denx.de Sat, 18 Mar 2006 23:31:12 +0100 committer Wolfgang Denk wd@atlas.denx.de Sat, 18 Mar 2006 23:31:12 +0100

Add support for MPC859/866 Rev. A.0

...

A different issue is that I can't get the ehternet to work, the error on network access is:

Works fine here.

Did you set the jumpers on the board correctly? See the FAQ: http://www.denx.de/wiki/view/DULG/EthernetProblemsOnTQM8xxL

Best regards,

thanks - just pulled the current git tree and the CPU shows up correctly now - and as the above URL suggest - it was the jumpers - we actually did consult the manual regarding jumpers - but we meesed up some how any way :)

thx ! hofrat