Hi,
im currently trying to set the u-boot environment variables by using fw_setenv. i hope my configuration everything is fine.. as im getting proper crc check and able to print environment variables, but not able to set using fw_setenv, as im getting the following error.
CRC error on /dev/mtd0 : Invalid argument Error: can't write fw_env to flash
Any help would be gr8..
Regards, Sandeep
Dear "M SANDEEP-TVF386",
In message 0A01463223B8164194908CAC85B66A12034145FA@ZMY16EXM67.ds.mot.com you wrote:
im currently trying to set the u-boot environment variables by using fw_setenv. i hope my configuration everything is fine.. as im getting proper crc check and able to print environment variables, but not able to set using fw_setenv, as im getting the following error.
CRC error on /dev/mtd0 : Invalid argument Error: can't write fw_env to flash
Which version of U-Boot is this?
Is this NOR flash or NAND?
What exactly does your flash memory map in U-Boot look like?
How are your Linux MTD partitions set up?
What exactly does your fw_env.config file contain?
Best regards,
Wolfgang Denk
participants (2)
-
M SANDEEP-TVF386 -
Wolfgang Denk