Signed-off-by: Dirk Eibach eibach@gdsys.de --- board/gdsys/compactcenter/compactcenter.c | 26 +++++++++----------------- 1 files changed, 9 insertions(+), 17 deletions(-)

diff --git a/board/gdsys/compactcenter/compactcenter.c b/board/gdsys/compactcenter/compactcenter.c index 477ef70..f448ef9 100644 --- a/board/gdsys/compactcenter/compactcenter.c +++ b/board/gdsys/compactcenter/compactcenter.c @@ -41,8 +41,6 @@ DECLARE_GLOBAL_DATA_PTR;

int board_early_init_f(void) { - u32 pvr = get_pvr(); - /* * Setup the interrupt controller polarities, triggers, etc. */ @@ -95,16 +93,14 @@ int board_early_init_f(void) mtdcr(AHB_TOP, 0x8000004B); mtdcr(AHB_BOT, 0x8000004B);

- if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) { - /* - * Configure USB-STP pins as alternate and not GPIO - * It seems to be neccessary to configure the STP pins as GPIO - * input at powerup (perhaps while USB reset is asserted). So - * we configure those pins to their "real" function now. - */ - gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - } + /* + * Configure USB-STP pins as alternate and not GPIO + * It seems to be neccessary to configure the STP pins as GPIO + * input at powerup (perhaps while USB reset is asserted). So + * we configure those pins to their "real" function now. + */ + gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);

/* Trigger board component reset */ out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff); @@ -250,7 +246,6 @@ int misc_init_r(void) { u32 sdr0_srst1 = 0; u32 eth_cfg; - u32 pvr = get_pvr();

/* * Set EMAC mode/configuration (GMII, SGMII, RGMII...). @@ -264,10 +259,7 @@ int misc_init_r(void) /* Set the for 2 RGMII mode */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL; - if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) - eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; - else - eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL; + eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; mtsdr(SDR0_ETH_CFG, eth_cfg);

/*