[U-Boot-Users] [PATCH] NE2000 working again

Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try to do anything in eth_stop() if eth_init() was not called. Simplified RX path in order to avoid timeouts on really really fast NE2000 cards (read: qemu with internal tftp), NetLoop() is clever enough to cope with 1 packet per eth_rx().
Signed-off-by: Vlad Lungu vlad@comsys.ro --- drivers/ne2000.c | 36 +++++++++++++----------------------- drivers/ne2000.h | 2 +- 2 files changed, 14 insertions(+), 24 deletions(-)
diff --git a/drivers/ne2000.c b/drivers/ne2000.c index b7ed876..0bfe74e 100644 --- a/drivers/ne2000.c +++ b/drivers/ne2000.c @@ -755,7 +755,7 @@ static void pcnet_reset_8390(void) #endif n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
- n2k_outb(n2k_inb(nic_base + PCNET_RESET), PCNET_RESET); + n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
for (i = 0; i < 100; i++) { if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0) @@ -833,6 +833,7 @@ static int plen[NB]; static int nrx = 0;
static int pkey = -1; +static int initialized=0;
void uboot_push_packet_len(int len) { PRINTK("pushed len = %d, nrx = %d\n", len, nrx); @@ -846,7 +847,12 @@ void uboot_push_packet_len(int len) { } plen[nrx] = len; dp83902a_recv(&pbuf[nrx*2000], len); +/*Just pass it to the upper layer*/ + NetReceive(&pbuf[nrx*2000], plen[nrx]); +/*eth_rx() was gutted, so this is not needed anymore*/ +#if 0 nrx++; +#endif }
void uboot_push_tx_done(int key, int val) { @@ -903,37 +909,21 @@ int eth_init(bd_t *bd) { if (dp83902a_init() == false) return -1; dp83902a_start(dev_addr); + initialized=1; return 0; }
void eth_halt() {
PRINTK("### eth_halt\n"); - - dp83902a_stop(); + if(initialized) + dp83902a_stop(); + initialized=0; }
int eth_rx() { - int j, tmo; - - PRINTK("### eth_rx\n"); - - tmo = get_timer (0) + TOUT * CFG_HZ; - while(1) { - dp83902a_poll(); - if (nrx > 0) { - for(j=0; j<nrx; j++) { - NetReceive(&pbuf[j*2000], plen[j]); - } - nrx = 0; - return 1; - } - if (get_timer (0) >= tmo) { - printf("timeout during rx\n"); - return 0; - } - } - return 0; +dp83902a_poll(); +return 1; }
int eth_send(volatile void *packet, int length) { diff --git a/drivers/ne2000.h b/drivers/ne2000.h index 2955533..c13d9f0 100644 --- a/drivers/ne2000.h +++ b/drivers/ne2000.h @@ -42,7 +42,7 @@ are GPL, so this is, of course, GPL. this file might be covered by the GNU General Public License.
Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. - at http://sources.redhat.com/ecos/ecos-license/ */ + at http://sources.redhat.com/ecos/ecos-license/ ------------------------------------------- ####ECOSGPLCOPYRIGHTEND#### ####BSDCOPYRIGHTBEGIN####

In message 4705271E.1010906@comsys.ro you wrote:
Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try to do anything in eth_stop() if eth_init() was not called. Simplified RX path in order to avoid timeouts on really really fast NE2000 cards (read: qemu with internal tftp), NetLoop() is clever enough to cope with 1 packet per eth_rx().
Signed-off-by: Vlad Lungu vlad@comsys.ro
Applied. Thanks.
But now it would be only consequent to remove all references to the "nrx" variable as well. Looking forward to your follow-up patch (sorry, I can't test this atm).
Best regards,
Wolfgang Denk

Wolfgang Denk wrote:
In message 4705271E.1010906@comsys.ro you wrote:
Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try to do anything in eth_stop() if eth_init() was not called. Simplified RX path in order to avoid timeouts on really really fast NE2000 cards (read: qemu with internal tftp), NetLoop() is clever enough to cope with 1 packet per eth_rx().
Signed-off-by: Vlad Lungu vlad@comsys.ro
Applied. Thanks.
But now it would be only consequent to remove all references to the "nrx" variable as well. Looking forward to your follow-up patch (sorry, I can't test this atm).
There are a lot more things to remove or change : NB, pbuf, plen just to name a few. AFAIK, there's no board in the current tree that uses it, not counting my patch for Qemu -M mips. How about I look into this after 1.3.0 is released?
Vlad

Dear Vlad,
in message 471B9220.8000206@comsys.ro you wrote:
Applied. Thanks.
But now it would be only consequent to remove all references to the "nrx" variable as well. Looking forward to your follow-up patch (sorry, I can't test this atm).
There are a lot more things to remove or change : NB, pbuf, plen just to name a few.
Ah, I see.
AFAIK, there's no board in the current tree that uses it, not counting my patch for Qemu -M mips. How about I look into this after 1.3.0 is released?
Agreed. Thanks in advance.
Best regards,
Wolfgang Denk
participants (2)
-
Vlad Lungu
-
Wolfgang Denk