Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the bitfields for all 83xx processors. The code to update some bitfields was compiled only on some processors. Now, the bitfields are programmed as long as the corresponding CFG_SCCR option is defined in the board header file. This means that the board header file should not define any CFG_SCCR macros for bitfields that don't exist on that processor, otherwise the SCCR will be programmed incorrectly.

Signed-off-by: Timur Tabi timur@freescale.com --- cpu/mpc83xx/cpu_init.c | 14 ++++++++++++-- include/mpc83xx.h | 2 ++ 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 3ac9161..53a5f59 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -83,20 +83,30 @@ void cpu_init_f (volatile immap_t * im) im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (CFG_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT); #endif

-#ifdef CONFIG_MPC834X #ifdef CFG_SCCR_TSEC1CM /* TSEC1 clock mode */ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (CFG_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT); #endif + #ifdef CFG_SCCR_TSEC2CM /* TSEC2 & I2C1 clock mode */ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (CFG_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT); #endif + +#ifdef CFG_SCCR_TSEC1ON + /* TSEC1 clock switch */ + im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) | (CFG_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT); +#endif + +#ifdef CFG_SCCR_TSEC2ON + /* TSEC2 clock switch */ + im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) | (CFG_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT); +#endif + #ifdef CFG_SCCR_USBMPHCM /* USB MPH clock mode */ im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) | (CFG_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT); #endif -#endif /* CONFIG_MPC834X */

#ifdef CFG_SCCR_PCICM /* PCI & DMA clock mode */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 336c0ac..9d40eae 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -600,7 +600,9 @@ #define SCCR_TSEC1CM_3 0xC0000000

#define SCCR_TSEC1ON 0x20000000 +#define SCCR_TSEC1ON_SHIFT 29 #define SCCR_TSEC2ON 0x10000000 +#define SCCR_TSEC2ON_SHIFT 28

#endif