Re: [U-Boot] u-boot for MPC8347
On Tue, 10 Mar 2009 22:12:00 -0700 Dave Jurasek dave@tyzx.com wrote:
We are attempting to get Linux running on our embedded Intelligent Stereo Camera that uses an MPC8347. We have previously used an MPC8347 in a product with u-boot 1.1.6 and Linux. Because we are now using a Marvell 88E1116 as the Ethernet "Phy", we were forced to use the newest u-boot (you communicated with Ray Fogg previously on this). This has caused us problems with booting our existing Linux kernel on the new board with the new u-boot. In particular, a routine that used to exist in u-boot 1.1.6 ( "ft_get_prop()" in ".../cpu/mpc83xx/cpu.c") seems to have disappeared in the new u-boot. Can you provide us any insight into where this functionality is in the new u-boot, or any other help?
the old CONFIG_OF_FLAT_TREE code has been deprecated by CONFIG_OF_LIBFDT code. Most device tree fixup code now lies in common/fdt_support.c.
Kim
Thank you.....
On Wed, Mar 11, 2009 at 10:48 AM, Kim Phillips kim.phillips@freescale.comwrote:
On Tue, 10 Mar 2009 22:12:00 -0700 Dave Jurasek dave@tyzx.com wrote:
We are attempting to get Linux running on our embedded Intelligent Stereo Camera that uses an MPC8347. We have previously used an MPC8347 in a
product
with u-boot 1.1.6 and Linux. Because we are now using a Marvell 88E1116
as
the Ethernet "Phy", we were forced to use the newest u-boot (you communicated with Ray Fogg previously on this). This has caused us
problems
with booting our existing Linux kernel on the new board with the new
u-boot.
In particular, a routine that used to exist in u-boot 1.1.6 ( "ft_get_prop()" in ".../cpu/mpc83xx/cpu.c") seems to have disappeared in
the
new u-boot. Can you provide us any insight into where this functionality
is
in the new u-boot, or any other help?
the old CONFIG_OF_FLAT_TREE code has been deprecated by CONFIG_OF_LIBFDT code. Most device tree fixup code now lies in common/fdt_support.c.
Kim
participants (2)
-
Dave Jurasek -
Kim Phillips