[U-Boot] iMX27 PDK board support - U-Boot - denx.biz

newer
[U-Boot] [PATCH] arm nomadik:...

[U-Boot] iMX27 PDK board support

older
[U-Boot] [PATCH-ARM 2/2] Add...

Brice.Walzer＠ulp.u-strasbg.fr

3 Jun 2009 3 Jun '09

11:18 a.m.

Hey guys,

J've seen that U-Boot V2 supports different MX27 CPU boards. Is U-Boot supported on Freescale i.MX27 PDK board ?

Thanks in advance. Brice Walzer

Reply

Show replies by date

Robert Schwebel

6 Jun 6 Jun

10:59 p.m.

On Wed, Jun 03, 2009 at 11:18:14AM +0200, Brice.Walzer@ulp.u-strasbg.fr wrote:

J've seen that U-Boot V2 supports different MX27 CPU boards. Is U-Boot supported on Freescale i.MX27 PDK board?

The tree contains support for the MX27ADS but not for the PDK; however, it is not very well tested because most of the development takes place on the phyCORE-i.MX27 so far.

We have support for the MX35-3-Stack, you might want to have a look at that code if you are working into that direction.

Patches are welcome, as always.

rsc

-- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

Reply

alfred steele

20 Jun 20 Jun

1:34 a.m.

We have support for the MX35-3-Stack, you might want to have a look at that code if you are working into that direction.

Where can i find the MX35-3-Stack patches? Does it support boot from NAND and does it have the NAND flash driver already? Thanks, Alfred

Reply

alfred steele

1:42 a.m.

Where can i find the MX35-3-Stack patches? Does it support boot from NAND and does it have the NAND flash driver already?

Are you talking about this in the GIT? http://git.denx.de/?p=u-boot/u-boot-v2.git;a=tree;f=board;h=1b079f6910333c85...

Thanks.

Reply

5809

Age (days ago)

5825

Last active (days ago)

Download

3 comments

3 participants

tags (0)

participants (3)

alfred steele
Brice.Walzer＠ulp.u-strasbg.fr
Robert Schwebel