Due to grown code sizes the TQM85xx boards don't build any more with some older tool chains (like ELDK 4.2). As these boards have long reached EOL it seems a waste of effort trying to fix them. The vendor has agreed to drop support for them, too. So let's get rid of them.

Signed-off-by: Wolfgang Denk wd@denx.de Cc: Stefan Roese sr@denx.de cc: Kim Phillips kim.phillips@freescale.com --- MAINTAINERS | 2 - board/tqc/tqm85xx/Makefile | 50 ---- board/tqc/tqm85xx/law.c | 79 ----- board/tqc/tqm85xx/nand.c | 472 ------------------------------ board/tqc/tqm85xx/sdram.c | 436 --------------------------- board/tqc/tqm85xx/tlb.c | 214 -------------- board/tqc/tqm85xx/tqm85xx.c | 626 --------------------------------------- boards.cfg | 7 - doc/README.scrapyard | 5 +- drivers/mtd/nand/fsl_upm.c | 10 +- include/configs/TQM85xx.h | 697 -------------------------------------------- 11 files changed, 8 insertions(+), 2590 deletions(-) delete mode 100644 board/tqc/tqm85xx/Makefile delete mode 100644 board/tqc/tqm85xx/law.c delete mode 100644 board/tqc/tqm85xx/nand.c delete mode 100644 board/tqc/tqm85xx/sdram.c delete mode 100644 board/tqc/tqm85xx/tlb.c delete mode 100644 board/tqc/tqm85xx/tqm85xx.c delete mode 100644 include/configs/TQM85xx.h

diff --git a/MAINTAINERS b/MAINTAINERS index 54ee1e6..4e3335b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -397,8 +397,6 @@ Stefan Roese sr@denx.de

uc100 MPC857

- TQM85xx MPC8540/8541/8555/8560 - acadia PPC405EZ alpr PPC440GX bamboo PPC440EP diff --git a/board/tqc/tqm85xx/Makefile b/board/tqc/tqm85xx/Makefile deleted file mode 100644 index 0a5501f..0000000 --- a/board/tqc/tqm85xx/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y += $(BOARD).o -COBJS-y += sdram.o -COBJS-y += law.o -COBJS-y += tlb.o - -COBJS-$(CONFIG_NAND) += nand.o - -COBJS := $(COBJS-y) -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/tqc/tqm85xx/law.c b/board/tqc/tqm85xx/law.c deleted file mode 100644 index c596303..0000000 --- a/board/tqc/tqm85xx/law.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* - * LAW(Local Access Window) configuration: - * - * Standard mapping: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xc000_0000 0xdfff_ffff RapidIO or PCI express 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M - * 0xe300_0000 0xe3ff_ffff CAN and NAND Flash 16M - * 0xef00_0000 0xefff_ffff PCI express IO 16M - * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 128M - * - * Big FLASH mapping: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xa000_ffff CCSR 1M - * 0xa200_0000 0xa2ff_ffff PCI1 IO 16M - * 0xa300_0000 0xa3ff_ffff CAN and NAND Flash 16M - * 0xaf00_0000 0xafff_ffff PCI express IO 16M - * 0xb000_0000 0xbfff_ffff RapidIO or PCI express 256M - * 0xc000_0000 0xffff_ffff FLASH (boot bank) 1G - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -#ifdef CONFIG_TQM_BIGFLASH -#define LAW_3_SIZE LAW_SIZE_1G -#define LAW_5_SIZE LAW_SIZE_256M -#else -#define LAW_3_SIZE LAW_SIZE_128M -#define LAW_5_SIZE LAW_SIZE_512M -#endif - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_2G, LAW_TRGT_IF_DDR), - SET_LAW(CONFIG_SYS_LBC_FLASH_BASE, LAW_3_SIZE, LAW_TRGT_IF_LBC), -#ifndef CONFIG_PCIE1 - SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_RIO), -#endif /* CONFIG_PCIE1 */ -#if defined(CONFIG_CAN_DRIVER) || defined(CONFIG_NAND) - SET_LAW(CONFIG_SYS_CAN_BASE, LAW_SIZE_16M, LAW_TRGT_IF_LBC), -#endif /* CONFIG_CAN_DRIVER || CONFIG_NAND */ -}; - -int num_law_entries = ARRAY_SIZE (law_table); diff --git a/board/tqc/tqm85xx/nand.c b/board/tqc/tqm85xx/nand.c deleted file mode 100644 index 4b16c31..0000000 --- a/board/tqc/tqm85xx/nand.c +++ /dev/null @@ -1,472 +0,0 @@ -/* - * (C) Copyright 2008 Wolfgang Grandegger wg@denx.de - * - * (C) Copyright 2006 - * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/processor.h> -#include <asm/immap_85xx.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/fsl_upm.h> -#include <ioports.h> - -#include <nand.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern uint get_lbc_clock (void); - -/* index of UPM RAM array run pattern for NAND command cycle */ -#define CONFIG_SYS_NAN_UPM_WRITE_CMD_OFS 0x08 - -/* index of UPM RAM array run pattern for NAND address cycle */ -#define CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS 0x10 - -/* Structure for table with supported UPM timings */ -struct upm_freq { - ulong freq; - const u32 *upm_patt; - uchar gpl4_disable; - uchar ehtr; - uchar ead; -}; - -/* NAND-FLASH UPM tables for TQM85XX according to TQM8548.pq.timing.101.doc */ - -/* UPM pattern for bus clock = 25 MHz */ -static const u32 upm_patt_25[] = { - /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */ - /* 0x00 */ 0x0ff32000, 0x0fa32000, 0x3fb32005, 0xfffffc00, - /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write CMD */ - /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00, - /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write ADDR */ - /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00, - /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Single RAM array entry -> NAND Write Data */ - /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00, - /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Burst RAM array entry -> unused */ - /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Refresh Timer RAM array entry -> unused */ - /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Exception RAM array entry -> unsused */ - /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, -}; - -/* UPM pattern for bus clock = 33.3 MHz */ -static const u32 upm_patt_33[] = { - /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */ - /* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00, - /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write CMD */ - /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00, - /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write ADDR */ - /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00, - /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Single RAM array entry -> NAND Write Data */ - /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00, - /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Burst RAM array entry -> unused */ - /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Refresh Timer RAM array entry -> unused */ - /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Exception RAM array entry -> unsused */ - /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, -}; - -/* UPM pattern for bus clock = 41.7 MHz */ -static const u32 upm_patt_42[] = { - /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */ - /* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00, - /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write CMD */ - /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00, - /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write ADDR */ - /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00, - /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Single RAM array entry -> NAND Write Data */ - /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00, - /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Burst RAM array entry -> unused */ - /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Refresh Timer RAM array entry -> unused */ - /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Exception RAM array entry -> unsused */ - /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, -}; - -/* UPM pattern for bus clock = 50 MHz */ -static const u32 upm_patt_50[] = { - /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */ - /* 0x00 */ 0x0ff33000, 0x0fa33100, 0x0fa33005, 0xfffffc00, - /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write CMD */ - /* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c35, 0xfffffc00, - /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write ADDR */ - /* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc35, 0xfffffc00, - /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Single RAM array entry -> NAND Write Data */ - /* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c05, 0xfffffc00, - /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Burst RAM array entry -> unused */ - /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Refresh Timer RAM array entry -> unused */ - /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Exception RAM array entry -> unsused */ - /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, -}; - -/* UPM pattern for bus clock = 66.7 MHz */ -static const u32 upm_patt_67[] = { - /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */ - /* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000, - /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write CMD */ - /* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35, - /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write ADDR */ - /* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35, - /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Single RAM array entry -> NAND Write Data */ - /* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05, - /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Burst RAM array entry -> unused */ - /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Refresh Timer RAM array entry -> unused */ - /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Exception RAM array entry -> unsused */ - /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, -}; - -/* UPM pattern for bus clock = 83.3 MHz */ -static const u32 upm_patt_83[] = { - /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */ - /* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000, - /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write CMD */ - /* 0x08 */ 0x00ff3e30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35, - /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write ADDR */ - /* 0x10 */ 0x00f3fe30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35, - /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Single RAM array entry -> NAND Write Data */ - /* 0x18 */ 0x00f33e00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05, - /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Burst RAM array entry -> unused */ - /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Refresh Timer RAM array entry -> unused */ - /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Exception RAM array entry -> unsused */ - /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, -}; - -/* UPM pattern for bus clock = 100 MHz */ -static const u32 upm_patt_100[] = { - /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */ - /* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33200, 0x0fa33000, - /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write CMD */ - /* 0x08 */ 0x00ff3f30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35, - /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write ADDR */ - /* 0x10 */ 0x00f3ff30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35, - /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Single RAM array entry -> NAND Write Data */ - /* 0x18 */ 0x00f33f00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05, - /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Burst RAM array entry -> unused */ - /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Refresh Timer RAM array entry -> unused */ - /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Exception RAM array entry -> unsused */ - /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, -}; - -/* UPM pattern for bus clock = 133.3 MHz */ -static const u32 upm_patt_133[] = { - /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */ - /* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33300, 0x0fa33000, - /* 0x04 */ 0x0fa33000, 0x0fa33005, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write CMD */ - /* 0x08 */ 0x00ff3f30, 0x00ff3d30, 0x0fff3d30, 0x0fff3c35, - /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write ADDR */ - /* 0x10 */ 0x00f3ff30, 0x00f3fd30, 0x0ff3fd30, 0x0ff3fc35, - /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Single RAM array entry -> NAND Write Data */ - /* 0x18 */ 0x00f33f00, 0x00f33d00, 0x0ff33d00, 0x0ff33c05, - /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Burst RAM array entry -> unused */ - /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Refresh Timer RAM array entry -> unused */ - /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Exception RAM array entry -> unsused */ - /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, -}; - -/* UPM pattern for bus clock = 166.7 MHz */ -static const u32 upm_patt_167[] = { - /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */ - /* 0x00 */ 0x0ff33200, 0x0fe33000, 0x0fa33300, 0x0fa33300, - /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write CMD */ - /* 0x08 */ 0x00ff3f30, 0x00ff3f30, 0x0fff3e30, 0xffff3c35, - /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Read Burst RAM array entry -> NAND Write ADDR */ - /* 0x10 */ 0x00f3ff30, 0x00f3ff30, 0x0ff3fe30, 0x0ff3fc35, - /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Single RAM array entry -> NAND Write Data */ - /* 0x18 */ 0x00f33f00, 0x00f33f00, 0x0ff33e00, 0x0ff33c05, - /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - - /* UPM Write Burst RAM array entry -> unused */ - /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Refresh Timer RAM array entry -> unused */ - /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - - /* UPM Exception RAM array entry -> unsused */ - /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, -}; - -/* Supported UPM timings */ -struct upm_freq upm_freq_table[] = { - /* nominal freq. | ptr to table | GPL4 dis. | EHTR | EAD */ - {25000000, upm_patt_25, 1, 0, 0}, - {33333333, upm_patt_33, 1, 0, 0}, - {41666666, upm_patt_42, 1, 0, 0}, - {50000000, upm_patt_50, 0, 0, 0}, - {66666666, upm_patt_67, 0, 0, 0}, - {83333333, upm_patt_83, 0, 0, 0}, - {100000000, upm_patt_100, 0, 1, 1}, - {133333333, upm_patt_133, 0, 1, 1}, - {166666666, upm_patt_167, 0, 1, 1}, -}; - -#define UPM_FREQS (sizeof(upm_freq_table) / sizeof(struct upm_freq)) - -volatile const u32 *nand_upm_patt; - -/* - * write into UPMB ram - */ -static void upmb_write (u_char addr, ulong val) -{ - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - - out_be32 (&lbc->mdr, val); - - clrsetbits_be32(&lbc->mbmr, MxMR_MAD_MSK, - MxMR_OP_WARR | (addr & MxMR_MAD_MSK)); - - /* dummy access to perform write */ - out_8 ((void __iomem *)CONFIG_SYS_NAND_BASE, 0); - - clrbits_be32(&lbc->mbmr, MxMR_OP_WARR); -} - -/* - * Initialize UPM for NAND flash access. - */ -static void nand_upm_setup (volatile fsl_lbc_t *lbc) -{ - uint i, j; - uint or3 = CONFIG_SYS_OR3_PRELIM; - uint clock = get_lbc_clock (); - - set_lbc_br(3, 0); /* disable bank and reset all bits */ - set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); - - /* - * Search appropriate UPM table for bus clock. - * If the bus clock exceeds a tolerated value, take the UPM timing for - * the next higher supported frequency to ensure that access works - * (even the access may be slower then). - */ - for (i = 0; (i < UPM_FREQS) && (clock > upm_freq_table[i].freq); i++) - ; - - if (i >= UPM_FREQS) - /* no valid entry found */ - /* take last entry with configuration for max. bus clock */ - i--; - - if (upm_freq_table[i].ehtr) { - /* EHTR must be set due to TQM8548 timing specification */ - or3 |= OR_UPM_EHTR; - } - if (upm_freq_table[i].ead) - /* EAD must be set due to TQM8548 timing specification */ - or3 |= OR_UPM_EAD; - - set_lbc_or(3, or3); - - /* Assign address of table */ - nand_upm_patt = upm_freq_table[i].upm_patt; - - for (j = 0; j < 64; j++) { - upmb_write (j, *nand_upm_patt); - nand_upm_patt++; - } - - /* Put UPM back to normal operation mode */ - if (upm_freq_table[i].gpl4_disable) - /* GPL4 must be disabled according to timing specification */ - out_be32 (&lbc->mbmr, MxMR_OP_NORM | MxMR_GPL_x4DIS); - - return; -} - -static struct fsl_upm_nand fun = { - .width = 8, - .upm_cmd_offset = 0x08, - .upm_addr_offset = 0x10, - .upm_mar_chip_offset = CONFIG_SYS_NAND_CS_DIST, - .chip_offset = CONFIG_SYS_NAND_CS_DIST, - .chip_delay = NAND_BIG_DELAY_US, - .wait_flags = FSL_UPM_WAIT_RUN_PATTERN | FSL_UPM_WAIT_WRITE_BUFFER, -}; - -void board_nand_select_device (struct nand_chip *nand, int chip) -{ -} - -int board_nand_init (struct nand_chip *nand) -{ - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - - if (!nand_upm_patt) - nand_upm_setup (lbc); - - fun.upm.io_addr = nand->IO_ADDR_R; - fun.upm.mxmr = (void __iomem *)&lbc->mbmr; - fun.upm.mdr = (void __iomem *)&lbc->mdr; - fun.upm.mar = (void __iomem *)&lbc->mar; - - return fsl_upm_nand_init (nand, &fun); -} diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c deleted file mode 100644 index baf073e..0000000 --- a/board/tqc/tqm85xx/sdram.c +++ /dev/null @@ -1,436 +0,0 @@ - -/* - * (C) Copyright 2005 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/processor.h> -#include <asm/immap_85xx.h> -#include <asm/processor.h> -#include <asm/mmu.h> - -struct sdram_conf_s { - unsigned long size; - unsigned long reg; -#ifdef CONFIG_TQM8548 - unsigned long refresh; -#endif /* CONFIG_TQM8548 */ -}; - -typedef struct sdram_conf_s sdram_conf_t; - -#ifdef CONFIG_TQM8548 -#ifdef CONFIG_TQM8548_AG -sdram_conf_t ddr_cs_conf[] = { - {(1024 << 20), 0x80044202, 0x0002D000}, /* 1024MB, 14x10(4) */ - { (512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */ - { (256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */ - { (128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */ -}; -#else /* !CONFIG_TQM8548_AG */ -sdram_conf_t ddr_cs_conf[] = { - {(512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */ - {(256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */ - {(128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */ -}; -#endif /* CONFIG_TQM8548_AG */ -#else /* !CONFIG_TQM8548 */ -sdram_conf_t ddr_cs_conf[] = { - {(512 << 20), 0x80000202}, /* 512MB, 14x10(4) */ - {(256 << 20), 0x80000102}, /* 256MB, 13x10(4) */ - {(128 << 20), 0x80000101}, /* 128MB, 13x9(4) */ - {( 64 << 20), 0x80000001}, /* 64MB, 12x9(4) */ -}; -#endif /* CONFIG_TQM8548 */ - -#define N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0])) - -int cas_latency (void); -static phys_size_t sdram_setup(int); - -/* - * Autodetect onboard DDR SDRAM on 85xx platforms - * - * NOTE: Some of the hardcoded values are hardware dependant, - * so this should be extended for other future boards - * using this routine! - */ -phys_size_t fixed_sdram(void) -{ - int casl = 0; - phys_size_t dram_size = 0; - - casl = cas_latency(); - dram_size = sdram_setup(casl); - if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) { - /* - * Try again with default CAS latency - */ - printf("Problem with CAS lantency, using default CL %d/10!\n", - CONFIG_DDR_DEFAULT_CL); - dram_size = sdram_setup(CONFIG_DDR_DEFAULT_CL); - puts(" "); - } - return dram_size; -} - -static phys_size_t sdram_setup(int casl) -{ - int i; - volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); -#ifdef CONFIG_TQM8548 - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE) - volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); -#endif -#else /* !CONFIG_TQM8548 */ - unsigned long cfg_ddr_timing1; - unsigned long cfg_ddr_mode; -#endif /* CONFIG_TQM8548 */ - - /* - * Disable memory controller. - */ - ddr->cs0_config = 0; - ddr->sdram_cfg = 0; - -#ifdef CONFIG_TQM8548 - /* Timing and refresh settings for DDR2-533 and below */ - - ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24; - ddr->cs0_config = ddr_cs_conf[0].reg; - ddr->timing_cfg_3 = 0x00020000; - - /* TIMING CFG 1, 533MHz - * PRETOACT: 4 Clocks - * ACTTOPRE: 12 Clocks - * ACTTORW: 4 Clocks - * CASLAT: 4 Clocks - * REFREC: EXT_REFREC:REFREC 53 Clocks - * WRREC: 4 Clocks - * ACTTOACT: 3 Clocks - * WRTORD: 2 Clocks - */ - ddr->timing_cfg_1 = 0x4C47D432; - - /* TIMING CFG 2, 533MHz - * ADD_LAT: 3 Clocks - * CPO: READLAT + 1 - * WR_LAT: 3 Clocks - * RD_TO_PRE: 2 Clocks - * WR_DATA_DELAY: 1/2 Clock - * CKE_PLS: 3 Clock - * FOUR_ACT: 14 Clocks - */ - ddr->timing_cfg_2 = 0x331848CE; - - /* DDR SDRAM Mode, 533MHz - * MRS: Extended Mode Register - * OUT: Outputs enabled - * RDQS: no - * DQS: enabled - * OCD: default state - * RTT: 75 Ohms - * Posted CAS: 3 Clocks - * ODS: reduced strength - * DLL: enabled - * MR: Mode Register - * PD: fast exit - * WR: 4 Clocks - * DLL: no DLL reset - * TM: normal - * CAS latency: 4 Clocks - * BT: sequential - * Burst length: 4 - */ - ddr->sdram_mode = 0x439E0642; - - /* DDR SDRAM Interval, 533MHz - * REFINT: 1040 Clocks - * BSTOPRE: 256 - */ - ddr->sdram_interval = (1040 << 16) | 0x100; - - /* - * Workaround for erratum DDR19 according to MPC8548 Device Errata - * document, Rev. 1: DDR IO receiver must be set to an acceptable - * bias point by modifying a hidden register. - */ - if (SVR_REV (get_svr ()) < 0x21) - gur->ddrioovcr = 0x90000000; /* enable, VSEL 1.8V */ - - /* DDR SDRAM CFG 2 - * FRC_SR: normal mode - * SR_IE: no self-refresh interrupt - * DLL_RST_DIS: don't care, leave at reset value - * DQS_CFG: differential DQS signals - * ODT_CFG: assert ODT to internal IOs only during reads to DRAM - * LVWx_CFG: don't care, leave at reset value - * NUM_PR: 1 refresh will be issued at a time - * DM_CFG: don't care, leave at reset value - * D_INIT: no data initialization - */ - ddr->sdram_cfg_2 = 0x04401000; - - /* DDR SDRAM MODE 2 - * MRS: Extended Mode Register 2 - */ - ddr->sdram_mode_2 = 0x8000C000; - - /* DDR SDRAM CLK CNTL - * CLK_ADJUST: 1/2 Clock 0x02000000 - * CLK_ADJUST: 5/8 Clock 0x02800000 - */ - ddr->sdram_clk_cntl = 0x02800000; - - /* wait for clock stabilization */ - asm ("sync;isync;msync"); - udelay (1000); - -#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE) - /* - * Workaround for erratum DDR20 according to MPC8548 Device Errata - * document, Rev. 1: "CKE signal may not function correctly after - * assertion of HRESET" - */ - - /* 1. Configure DDR register as is done in normal DDR configuration. - * Do not set DDR_SDRAM_CFG[MEM_EN]. - * - * 2. Set reserved bit EEBACR[3] at offset 0x1000 - */ - ecm->eebacr |= 0x10000000; - - /* - * 3. Before DDR_SDRAM_CFG[MEM_EN] is set, write DDR_SDRAM_CFG_2[D_INIT] - * - * DDR_SDRAM_CFG_2: - * FRC_SR: normal mode - * SR_IE: no self-refresh interrupt - * DLL_RST_DIS: don't care, leave at reset value - * DQS_CFG: differential DQS signals - * ODT_CFG: assert ODT to internal IOs only during reads to DRAM - * LVWx_CFG: don't care, leave at reset value - * NUM_PR: 1 refresh will be issued at a time - * DM_CFG: don't care, leave at reset value - * D_INIT: enable data initialization - */ - ddr->sdram_cfg_2 |= 0x00000010; - - /* - * 4. Before DDR_SDRAM_CFG[MEM_EN] set, write D3[21] to disable data - * training - */ - ddr->debug[2] |= 0x00000400; - - /* - * 5. Wait 200 micro-seconds - */ - udelay (200); - - /* - * 6. Set DDR_SDRAM_CFG[MEM_EN] - * - * BTW, initialize DDR_SDRAM_CFG: - * MEM_EN: enabled - * SREN: don't care, leave at reset value - * ECC_EN: no error report - * RD_EN: no registered DIMMs - * SDRAM_TYPE: DDR2 - * DYN_PWR: no power management - * 32_BE: don't care, leave at reset value - * 8_BE: 4 beat burst - * NCAP: don't care, leave at reset value - * 2T_EN: 1T Timing - * BA_INTLV_CTL: no interleaving - * x32_EN: x16 organization - * PCHB8: MA[10] for auto-precharge - * HSE: half strength for single and 2-layer stacks - * (full strength for 3- and 4-layer stacks not - * yet considered) - * MEM_HALT: no halt - * BI: automatic initialization - */ - ddr->sdram_cfg = 0x83000008; - - /* - * 7. Poll DDR_SDRAM_CFG_2[D_INIT] until it is cleared by hardware - */ - asm ("sync;isync;msync"); - while (ddr->sdram_cfg_2 & 0x00000010) - asm ("eieio"); - - /* - * 8. Clear D3[21] to re-enable data training - */ - ddr->debug[2] &= ~0x00000400; - - /* - * 9. Set D2(21) to force data training to run - */ - ddr->debug[1] |= 0x00000400; - - /* - * 10. Poll on D2[21] until it is cleared by hardware - */ - asm ("sync;isync;msync"); - while (ddr->debug[1] & 0x00000400) - asm ("eieio"); - - /* - * 11. Clear reserved bit EEBACR[3] at offset 0x1000 - */ - ecm->eebacr &= ~0x10000000; - -#else /* !(CONFIG_TQM8548_AG || CONFIG_TQM8548_BE) */ - - /* DDR SDRAM CLK CNTL - * MEM_EN: enabled - * SREN: don't care, leave at reset value - * ECC_EN: no error report - * RD_EN: no register DIMMs - * SDRAM_TYPE: DDR2 - * DYN_PWR: no power management - * 32_BE: don't care, leave at reset value - * 8_BE: 4 beat burst - * NCAP: don't care, leave at reset value - * 2T_EN: 1T Timing - * BA_INTLV_CTL: no interleaving - * x32_EN: x16 organization - * PCHB8: MA[10] for auto-precharge - * HSE: half strength for single and 2-layer stacks - * (full strength for 3- and 4-layer stacks no yet considered) - * MEM_HALT: no halt - * BI: automatic initialization - */ - ddr->sdram_cfg = 0x83000008; - -#endif /* CONFIG_TQM8548_AG || CONFIG_TQM8548_BE */ - - asm ("sync; isync; msync"); - udelay (1000); -#else /* !CONFIG_TQM8548 */ - switch (casl) { - case 20: - cfg_ddr_timing1 = 0x47405331 | (3 << 16); - cfg_ddr_mode = 0x40020002 | (2 << 4); - break; - - case 25: - cfg_ddr_timing1 = 0x47405331 | (4 << 16); - cfg_ddr_mode = 0x40020002 | (6 << 4); - break; - - case 30: - default: - cfg_ddr_timing1 = 0x47405331 | (5 << 16); - cfg_ddr_mode = 0x40020002 | (3 << 4); - break; - } - - ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24; - ddr->cs0_config = ddr_cs_conf[0].reg; - ddr->timing_cfg_1 = cfg_ddr_timing1; - ddr->timing_cfg_2 = 0x00000800; /* P9-45,may need tuning */ - ddr->sdram_mode = cfg_ddr_mode; - ddr->sdram_interval = 0x05160100; /* autocharge,no open page */ - ddr->err_disable = 0x0000000D; - - asm ("sync; isync; msync"); - udelay (1000); - - ddr->sdram_cfg = 0xc2000000; /* unbuffered,no DYN_PWR */ - asm ("sync; isync; msync"); - udelay (1000); -#endif /* CONFIG_TQM8548 */ - - /* - * get_ram_size() depends on having tlbs for the DDR, but they are - * not yet setup because we don't know the size. Set up a temp - * mapping and delete it when done. - */ - setup_ddr_tlbs(CONFIG_SYS_DDR_EARLY_SIZE_MB); - for (i = 0; i < N_DDR_CS_CONF; i++) { - ddr->cs0_config = ddr_cs_conf[i].reg; - - if (get_ram_size (0, ddr_cs_conf[i].size) == - ddr_cs_conf[i].size) { - /* - * size detected -> set Chip Select Bounds Register - */ - ddr->cs0_bnds = (ddr_cs_conf[i].size - 1) >> 24; - - break; - } - } - clear_ddr_tlbs(CONFIG_SYS_DDR_EARLY_SIZE_MB); - -#ifdef CONFIG_TQM8548 - if (i < N_DDR_CS_CONF) { - /* Adjust refresh rate for DDR2 */ - - ddr->timing_cfg_3 = ddr_cs_conf[i].refresh & 0x00070000; - - ddr->timing_cfg_1 = (ddr->timing_cfg_1 & 0xFFFF0FFF) | - (ddr_cs_conf[i].refresh & 0x0000F000); - - return ddr_cs_conf[i].size; - } -#endif /* CONFIG_TQM8548 */ - - /* return size if detected, else return 0 */ - return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0; -} - -#if defined(CONFIG_SYS_DRAM_TEST) -int testdram (void) -{ - uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; - uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; - uint *p; - - printf ("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf ("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf ("SDRAM test passed.\n"); - return 0; -} -#endif diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c deleted file mode 100644 index f9f8cc9..0000000 --- a/board/tqc/tqm85xx/tlb.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX | MAS3_SW | MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX | MAS3_SW | MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX | MAS3_SW | MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX | MAS3_SW | MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - -#ifndef CONFIG_TQM_BIGFLASH - /* - * TLB 0, 1: 128M Non-cacheable, guarded - * 0xf8000000 128M FLASH - * Out of reset this entry is only 4K. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 1, BOOKE_PAGESZ_64M, 1), - SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x4000000, - CONFIG_SYS_FLASH_BASE + 0x4000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 0, BOOKE_PAGESZ_64M, 1), - - /* - * TLB 2: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half - */ - SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 3: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, - CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - -#ifdef CONFIG_PCIE1 - /* - * TLB 4: 256M Non-cacheable, guarded - * 0xc0000000 256M PCI express MEM First half - */ - SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS, CONFIG_SYS_PCIE1_MEM_BUS, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 5: 256M Non-cacheable, guarded - * 0xd0000000 256M PCI express MEM Second half - */ - SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS + 0x10000000, - CONFIG_SYS_PCIE1_MEM_BUS + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), -#else /* !CONFIG_PCIE */ - /* - * TLB 4: 256M Non-cacheable, guarded - * 0xc0000000 256M Rapid IO MEM First half - */ - SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 5: 256M Non-cacheable, guarded - * 0xd0000000 256M Rapid IO MEM Second half - */ - SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, - CONFIG_SYS_RIO_MEM_BASE + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), -#endif /* CONFIG_PCIE */ - - /* - * TLB 6: 64M Non-cacheable, guarded - * 0xe0000000 1M CCSRBAR - * 0xe2000000 16M PCI1 IO - * 0xe3000000 16M CAN and NAND Flash - */ - SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 6, BOOKE_PAGESZ_64M, 1), -#ifdef CONFIG_PCIE1 - /* - * TLB 9: 16M Non-cacheable, guarded - * 0xef000000 16M PCI express IO - */ - SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_IO_BUS, CONFIG_SYS_PCIE1_IO_BUS, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 9, BOOKE_PAGESZ_16M, 1), -#endif /* CONFIG_PCIE */ - -#else /* CONFIG_TQM_BIGFLASH */ - - /* - * TLB 0,1,2,3: 1G Non-cacheable, guarded - * 0xc0000000 1G FLASH - * Out of reset this entry is only 4K. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x10000000, - CONFIG_SYS_FLASH_BASE + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x20000000, - CONFIG_SYS_FLASH_BASE + 0x20000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 1, BOOKE_PAGESZ_256M, 1), - SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x30000000, - CONFIG_SYS_FLASH_BASE + 0x30000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 0, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 4: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half - */ - SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 5: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, - CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), - -#ifdef CONFIG_PCIE1 - /* - * TLB 6: 256M Non-cacheable, guarded - * 0xc0000000 256M PCI express MEM First half - */ - SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS, CONFIG_SYS_PCIE1_MEM_BUS, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 6, BOOKE_PAGESZ_256M, 1), -#else /* !CONFIG_PCIE */ - /* - * TLB 6: 256M Non-cacheable, guarded - * 0xb0000000 256M Rapid IO MEM First half - */ - SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 6, BOOKE_PAGESZ_256M, 1), - -#endif /* CONFIG_PCIE */ - - /* - * TLB 7: 64M Non-cacheable, guarded - * 0xa0000000 1M CCSRBAR - * 0xa2000000 16M PCI1 IO - * 0xa3000000 16M CAN and NAND Flash - */ - SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 7, BOOKE_PAGESZ_64M, 1), -#ifdef CONFIG_PCIE1 - /* - * TLB 10: 16M Non-cacheable, guarded - * 0xaf000000 16M PCI express IO - */ - SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 10, BOOKE_PAGESZ_16M, 1), -#endif /* CONFIG_PCIE */ - -#endif /* CONFIG_TQM_BIGFLASH */ -}; - -int num_tlb_entries = ARRAY_SIZE (tlb_table); diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c deleted file mode 100644 index 8fb73ab..0000000 --- a/board/tqc/tqm85xx/tqm85xx.c +++ /dev/null @@ -1,626 +0,0 @@ -/* - * (C) Copyright 2008 Wolfgang Grandegger wg@denx.de - * - * (C) Copyright 2006 - * Thomas Waehner, TQ-Systems GmbH, thomas.waehner@tqs.de. - * - * (C) Copyright 2005 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * Copyright 2004 Freescale Semiconductor. - * (C) Copyright 2002,2003, Motorola Inc. - * Xianghua Xiao, (X.Xiao@motorola.com) - * - * (C) Copyright 2002 Scott McNutt smcnutt@artesyncp.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <asm/io.h> -#include <asm/fsl_serdes.h> -#include <linux/compiler.h> -#include <ioports.h> -#include <flash.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern flash_info_t flash_info[]; /* FLASH chips info */ - -void local_bus_init (void); -ulong flash_get_size (ulong base, int banknum); - -#ifdef CONFIG_PS2MULT -void ps2mult_early_init (void); -#endif - -#ifdef CONFIG_CPM2 -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A: conf, ppar, psor, pdir, podr, pdat */ - { - {1, 1, 1, 0, 0, 0}, /* PA31: FCC1 MII COL */ - {1, 1, 1, 0, 0, 0}, /* PA30: FCC1 MII CRS */ - {1, 1, 1, 1, 0, 0}, /* PA29: FCC1 MII TX_ER */ - {1, 1, 1, 1, 0, 0}, /* PA28: FCC1 MII TX_EN */ - {1, 1, 1, 0, 0, 0}, /* PA27: FCC1 MII RX_DV */ - {1, 1, 1, 0, 0, 0}, /* PA26: FCC1 MII RX_ER */ - {0, 1, 0, 1, 0, 0}, /* PA25: FCC1 ATMTXD[0] */ - {0, 1, 0, 1, 0, 0}, /* PA24: FCC1 ATMTXD[1] */ - {0, 1, 0, 1, 0, 0}, /* PA23: FCC1 ATMTXD[2] */ - {0, 1, 0, 1, 0, 0}, /* PA22: FCC1 ATMTXD[3] */ - {1, 1, 0, 1, 0, 0}, /* PA21: FCC1 MII TxD[3] */ - {1, 1, 0, 1, 0, 0}, /* PA20: FCC1 MII TxD[2] */ - {1, 1, 0, 1, 0, 0}, /* PA19: FCC1 MII TxD[1] */ - {1, 1, 0, 1, 0, 0}, /* PA18: FCC1 MII TxD[0] */ - {1, 1, 0, 0, 0, 0}, /* PA17: FCC1 MII RxD[0] */ - {1, 1, 0, 0, 0, 0}, /* PA16: FCC1 MII RxD[1] */ - {1, 1, 0, 0, 0, 0}, /* PA15: FCC1 MII RxD[2] */ - {1, 1, 0, 0, 0, 0}, /* PA14: FCC1 MII RxD[3] */ - {0, 1, 0, 0, 0, 0}, /* PA13: FCC1 ATMRXD[3] */ - {0, 1, 0, 0, 0, 0}, /* PA12: FCC1 ATMRXD[2] */ - {0, 1, 0, 0, 0, 0}, /* PA11: FCC1 ATMRXD[1] */ - {0, 1, 0, 0, 0, 0}, /* PA10: FCC1 ATMRXD[0] */ - {0, 1, 1, 1, 0, 0}, /* PA9 : FCC1 L1TXD */ - {0, 1, 1, 0, 0, 0}, /* PA8 : FCC1 L1RXD */ - {0, 0, 0, 1, 0, 0}, /* PA7 : PA7 */ - {0, 1, 1, 1, 0, 0}, /* PA6 : TDM A1 L1RSYNC */ - {0, 0, 0, 1, 0, 0}, /* PA5 : PA5 */ - {0, 0, 0, 1, 0, 0}, /* PA4 : PA4 */ - {0, 0, 0, 1, 0, 0}, /* PA3 : PA3 */ - {0, 0, 0, 1, 0, 0}, /* PA2 : PA2 */ - {0, 0, 0, 0, 0, 0}, /* PA1 : FREERUN */ - {0, 0, 0, 1, 0, 0} /* PA0 : PA0 */ - }, - - /* Port B: conf, ppar, psor, pdir, podr, pdat */ - { - {1, 1, 0, 1, 0, 0}, /* PB31: FCC2 MII TX_ER */ - {1, 1, 0, 0, 0, 0}, /* PB30: FCC2 MII RX_DV */ - {1, 1, 1, 1, 0, 0}, /* PB29: FCC2 MII TX_EN */ - {1, 1, 0, 0, 0, 0}, /* PB28: FCC2 MII RX_ER */ - {1, 1, 0, 0, 0, 0}, /* PB27: FCC2 MII COL */ - {1, 1, 0, 0, 0, 0}, /* PB26: FCC2 MII CRS */ - {1, 1, 0, 1, 0, 0}, /* PB25: FCC2 MII TxD[3] */ - {1, 1, 0, 1, 0, 0}, /* PB24: FCC2 MII TxD[2] */ - {1, 1, 0, 1, 0, 0}, /* PB23: FCC2 MII TxD[1] */ - {1, 1, 0, 1, 0, 0}, /* PB22: FCC2 MII TxD[0] */ - {1, 1, 0, 0, 0, 0}, /* PB21: FCC2 MII RxD[0] */ - {1, 1, 0, 0, 0, 0}, /* PB20: FCC2 MII RxD[1] */ - {1, 1, 0, 0, 0, 0}, /* PB19: FCC2 MII RxD[2] */ - {1, 1, 0, 0, 0, 0}, /* PB18: FCC2 MII RxD[3] */ - {1, 1, 0, 0, 0, 0}, /* PB17: FCC3:RX_DIV */ - {1, 1, 0, 0, 0, 0}, /* PB16: FCC3:RX_ERR */ - {1, 1, 0, 1, 0, 0}, /* PB15: FCC3:TX_ERR */ - {1, 1, 0, 1, 0, 0}, /* PB14: FCC3:TX_EN */ - {1, 1, 0, 0, 0, 0}, /* PB13: FCC3:COL */ - {1, 1, 0, 0, 0, 0}, /* PB12: FCC3:CRS */ - {1, 1, 0, 0, 0, 0}, /* PB11: FCC3:RXD */ - {1, 1, 0, 0, 0, 0}, /* PB10: FCC3:RXD */ - {1, 1, 0, 0, 0, 0}, /* PB9 : FCC3:RXD */ - {1, 1, 0, 0, 0, 0}, /* PB8 : FCC3:RXD */ - {1, 1, 0, 1, 0, 0}, /* PB7 : FCC3:TXD */ - {1, 1, 0, 1, 0, 0}, /* PB6 : FCC3:TXD */ - {1, 1, 0, 1, 0, 0}, /* PB5 : FCC3:TXD */ - {1, 1, 0, 1, 0, 0}, /* PB4 : FCC3:TXD */ - {0, 0, 0, 0, 0, 0}, /* PB3 : pin doesn't exist */ - {0, 0, 0, 0, 0, 0}, /* PB2 : pin doesn't exist */ - {0, 0, 0, 0, 0, 0}, /* PB1 : pin doesn't exist */ - {0, 0, 0, 0, 0, 0} /* PB0 : pin doesn't exist */ - }, - - /* Port C: conf, ppar, psor, pdir, podr, pdat */ - { - {0, 0, 0, 1, 0, 0}, /* PC31: PC31 */ - {0, 0, 0, 1, 0, 0}, /* PC30: PC30 */ - {0, 1, 1, 0, 0, 0}, /* PC29: SCC1 EN *CLSN */ - {0, 0, 0, 1, 0, 0}, /* PC28: PC28 */ - {0, 0, 0, 1, 0, 0}, /* PC27: UART Clock in */ - {0, 0, 0, 1, 0, 0}, /* PC26: PC26 */ - {0, 0, 0, 1, 0, 0}, /* PC25: PC25 */ - {0, 0, 0, 1, 0, 0}, /* PC24: PC24 */ - {0, 1, 0, 1, 0, 0}, /* PC23: ATMTFCLK */ - {0, 1, 0, 0, 0, 0}, /* PC22: ATMRFCLK */ - {1, 1, 0, 0, 0, 0}, /* PC21: SCC1 EN RXCLK */ - {1, 1, 0, 0, 0, 0}, /* PC20: SCC1 EN TXCLK */ - {1, 1, 0, 0, 0, 0}, /* PC19: FCC2 MII RX_CLK CLK13 */ - {1, 1, 0, 0, 0, 0}, /* PC18: FCC Tx Clock (CLK14) */ - {1, 1, 0, 0, 0, 0}, /* PC17: PC17 */ - {1, 1, 0, 0, 0, 0}, /* PC16: FCC Tx Clock (CLK16) */ - {0, 1, 0, 0, 0, 0}, /* PC15: PC15 */ - {0, 1, 0, 0, 0, 0}, /* PC14: SCC1 EN *CD */ - {0, 1, 0, 0, 0, 0}, /* PC13: PC13 */ - {0, 1, 0, 1, 0, 0}, /* PC12: PC12 */ - {0, 0, 0, 1, 0, 0}, /* PC11: LXT971 transmit control */ - {0, 0, 0, 1, 0, 0}, /* PC10: FETHMDC */ - {0, 0, 0, 0, 0, 0}, /* PC9 : FETHMDIO */ - {0, 0, 0, 1, 0, 0}, /* PC8 : PC8 */ - {0, 0, 0, 1, 0, 0}, /* PC7 : PC7 */ - {0, 0, 0, 1, 0, 0}, /* PC6 : PC6 */ - {0, 0, 0, 1, 0, 0}, /* PC5 : PC5 */ - {0, 0, 0, 1, 0, 0}, /* PC4 : PC4 */ - {0, 0, 0, 1, 0, 0}, /* PC3 : PC3 */ - {0, 0, 0, 1, 0, 1}, /* PC2 : ENET FDE */ - {0, 0, 0, 1, 0, 0}, /* PC1 : ENET DSQE */ - {0, 0, 0, 1, 0, 0}, /* PC0 : ENET LBK */ - }, - - /* Port D: conf, ppar, psor, pdir, podr, pdat */ - { -#ifdef CONFIG_TQM8560 - {1, 1, 0, 0, 0, 0}, /* PD31: SCC1 EN RxD */ - {1, 1, 1, 1, 0, 0}, /* PD30: SCC1 EN TxD */ - {1, 1, 0, 1, 0, 0}, /* PD29: SCC1 EN TENA */ -#else /* !CONFIG_TQM8560 */ - {0, 0, 0, 0, 0, 0}, /* PD31: PD31 */ - {0, 0, 0, 0, 0, 0}, /* PD30: PD30 */ - {0, 0, 0, 0, 0, 0}, /* PD29: PD29 */ -#endif /* CONFIG_TQM8560 */ - {1, 1, 0, 0, 0, 0}, /* PD28: PD28 */ - {1, 1, 0, 1, 0, 0}, /* PD27: PD27 */ - {1, 1, 0, 1, 0, 0}, /* PD26: PD26 */ - {0, 0, 0, 1, 0, 0}, /* PD25: PD25 */ - {0, 0, 0, 1, 0, 0}, /* PD24: PD24 */ - {0, 0, 0, 1, 0, 0}, /* PD23: PD23 */ - {0, 0, 0, 1, 0, 0}, /* PD22: PD22 */ - {0, 0, 0, 1, 0, 0}, /* PD21: PD21 */ - {0, 0, 0, 1, 0, 0}, /* PD20: PD20 */ - {0, 0, 0, 1, 0, 0}, /* PD19: PD19 */ - {0, 0, 0, 1, 0, 0}, /* PD18: PD18 */ - {0, 1, 0, 0, 0, 0}, /* PD17: FCC1 ATMRXPRTY */ - {0, 1, 0, 1, 0, 0}, /* PD16: FCC1 ATMTXPRTY */ - {0, 1, 1, 0, 1, 0}, /* PD15: I2C SDA */ - {0, 0, 0, 1, 0, 0}, /* PD14: LED */ - {0, 0, 0, 0, 0, 0}, /* PD13: PD13 */ - {0, 0, 0, 0, 0, 0}, /* PD12: PD12 */ - {0, 0, 0, 0, 0, 0}, /* PD11: PD11 */ - {0, 0, 0, 0, 0, 0}, /* PD10: PD10 */ - {0, 1, 0, 1, 0, 0}, /* PD9 : SMC1 TXD */ - {0, 1, 0, 0, 0, 0}, /* PD8 : SMC1 RXD */ - {0, 0, 0, 1, 0, 1}, /* PD7 : PD7 */ - {0, 0, 0, 1, 0, 1}, /* PD6 : PD6 */ - {0, 0, 0, 1, 0, 1}, /* PD5 : PD5 */ - {0, 0, 0, 1, 0, 1}, /* PD4 : PD4 */ - {0, 0, 0, 0, 0, 0}, /* PD3 : pin doesn't exist */ - {0, 0, 0, 0, 0, 0}, /* PD2 : pin doesn't exist */ - {0, 0, 0, 0, 0, 0}, /* PD1 : pin doesn't exist */ - {0, 0, 0, 0, 0, 0} /* PD0 : pin doesn't exist */ - } -}; -#endif /* CONFIG_CPM2 */ - -#define CASL_STRING1 "casl=xx" -#define CASL_STRING2 "casl=" - -static const int casl_table[] = { 20, 25, 30 }; -#define N_CASL (sizeof(casl_table) / sizeof(casl_table[0])) - -int cas_latency (void) -{ - char buf[128]; - int casl; - int val; - int i; - - casl = CONFIG_DDR_DEFAULT_CL; - - i = getenv_f("serial#", buf, sizeof(buf)); - - if (i >0) { - if (strncmp(buf + strlen (buf) - strlen (CASL_STRING1), - CASL_STRING2, strlen (CASL_STRING2)) == 0) { - val = simple_strtoul (buf + strlen (buf) - 2, NULL, 10); - - for (i = 0; i < N_CASL; ++i) { - if (val == casl_table[i]) { - return val; - } - } - } - } - - return casl; -} - -int checkboard (void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf ("Board: %s", CONFIG_BOARDNAME); - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc ('\n'); - - /* - * Initialize local bus. - */ - local_bus_init (); - - return 0; -} - -int misc_init_r (void) -{ - /* - * Adjust flash start and offset to detected values - */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; - gd->bd->bi_flashoffset = 0; - - /* - * Recalculate CS configuration if second FLASH bank is available - */ - if (flash_info[0].size > 0) { - set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) | - (CONFIG_SYS_OR1_PRELIM & 0x00007fff)); - set_lbc_br(1, gd->bd->bi_flashstart | - (CONFIG_SYS_BR1_PRELIM & 0x00007fff)); - /* - * Re-check to get correct base address for bank 1 - */ - flash_get_size (gd->bd->bi_flashstart, 0); - } else { - set_lbc_or(1, 0); - set_lbc_br(1, 0); - } - - /* - * If bank 1 is equipped, bank 0 is mapped after bank 1 - */ - set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) | - (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); - set_lbc_br(0, (gd->bd->bi_flashstart + flash_info[0].size) | - (CONFIG_SYS_BR0_PRELIM & 0x00007fff)); - - /* - * Re-check to get correct base address for bank 0 - */ - flash_get_size (gd->bd->bi_flashstart + flash_info[0].size, 1); - - /* - * Re-do flash protection upon new addresses - */ - flash_protect (FLAG_PROTECT_CLEAR, - gd->bd->bi_flashstart, 0xffffffff, - &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); - - /* Monitor protection ON by default */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, 0xffffffff, - &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); - - /* Environment protection ON by default */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); - -#ifdef CONFIG_ENV_ADDR_REDUND - /* Redundant environment protection ON by default */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); -#endif - - return 0; -} - -#ifdef CONFIG_CAN_DRIVER -/* - * Initialize UPMC RAM - */ -static void upmc_write (u_char addr, uint val) -{ - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - - out_be32 (&lbc->mdr, val); - - clrsetbits_be32(&lbc->mcmr, MxMR_MAD_MSK, - MxMR_OP_WARR | (addr & MxMR_MAD_MSK)); - - /* dummy access to perform write */ - out_8 ((void __iomem *)CONFIG_SYS_CAN_BASE, 0); - - /* normal operation */ - clrbits_be32(&lbc->mcmr, MxMR_OP_WARR); -} -#endif /* CONFIG_CAN_DRIVER */ - -uint get_lbc_clock (void) -{ - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - sys_info_t sys_info; - ulong clkdiv = lbc->lcrr & LCRR_CLKDIV; - - get_sys_info (&sys_info); - - if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { -#ifdef CONFIG_MPC8548 - /* - * Yes, the entire PQ38 family use the same - * bit-representation for twice the clock divider value. - */ - clkdiv *= 2; -#endif - return sys_info.freqSystemBus / clkdiv; - } - - puts("Invalid clock divider value in CONFIG_SYS_LBC_LCRR\n"); - - return 0; -} - -/* - * Initialize Local Bus - */ -void local_bus_init (void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - uint lbc_mhz = get_lbc_clock () / 1000000; - -#ifdef CONFIG_MPC8548 - uint svr = get_svr (); - uint lcrr; - - /* - * MPC revision < 2.0 - * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU1: - * Modify engineering use only register at address 0xE_0F20. - * "1. Read register at offset 0xE_0F20 - * 2. And value with 0x0000_FFFF - * 3. OR result with 0x0000_0004 - * 4. Write result back to offset 0xE_0F20." - * - * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU2: - * Modify engineering use only register at address 0xE_0F20. - * "1. Read register at offset 0xE_0F20 - * 2. And value with 0xFFFF_FFDF - * 3. Write result back to offset 0xE_0F20." - * - * Since it is the same register, we do the modification in one step. - */ - if (SVR_MAJ (svr) < 2) { - uint dummy = gur->lbiuiplldcr1; - dummy &= 0x0000FFDF; - dummy |= 0x00000004; - gur->lbiuiplldcr1 = dummy; - } - - lcrr = CONFIG_SYS_LBC_LCRR; - - /* - * Local Bus Clock > 83.3 MHz. According to timing - * specifications set LCRR[EADC] to 2 delay cycles. - */ - if (lbc_mhz > 83) { - lcrr &= ~LCRR_EADC; - lcrr |= LCRR_EADC_2; - } - - /* - * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30 - * disable PLL bypass for Local Bus Clock > 83 MHz. - */ - if (lbc_mhz >= 66) - lcrr &= (~LCRR_DBYP); /* DLL Enabled */ - - else - lcrr |= LCRR_DBYP; /* DLL Bypass */ - - lbc->lcrr = lcrr; - asm ("sync;isync;msync"); - - /* - * According to MPC8548ERMAD Rev.1.3 read back LCRR - * and terminate with isync - */ - lcrr = lbc->lcrr; - asm ("isync;"); - - /* let DLL stabilize */ - udelay (500); - -#else /* !CONFIG_MPC8548 */ - - /* - * Errata LBC11. - * Fix Local Bus clock glitch when DLL is enabled. - * - * If localbus freq is < 66MHz, DLL bypass mode must be used. - * If localbus freq is > 133MHz, DLL can be safely enabled. - * Between 66 and 133, the DLL is enabled with an override workaround. - */ - - if (lbc_mhz < 66) { - lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ - lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA | - LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */ - - } else if (lbc_mhz >= 133) { - lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */ - - } else { - /* - * On REV1 boards, need to change CLKDIV before enable DLL. - * Default CLKDIV is 8, change it to 4 temporarily. - */ - uint pvr = get_pvr (); - uint temp_lbcdll = 0; - - if (pvr == PVR_85xx_REV1) { - /* FIXME: Justify the high bit here. */ - lbc->lcrr = 0x10000004; - } - - lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */ - udelay (200); - - /* - * Sample LBC DLL ctrl reg, upshift it to set the - * override bits. - */ - temp_lbcdll = gur->lbcdllcr; - gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000); - asm ("sync;isync;msync"); - } -#endif /* !CONFIG_MPC8548 */ - -#ifdef CONFIG_CAN_DRIVER - /* - * According to timing specifications EAD must be - * set if Local Bus Clock is > 83 MHz. - */ - if (lbc_mhz > 83) - set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); - else - set_lbc_or(2, CONFIG_SYS_OR2_CAN); - set_lbc_br(2, CONFIG_SYS_BR2_CAN); - - /* LGPL4 is UPWAIT */ - out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X); - - /* Initialize UPMC for CAN: single read */ - upmc_write (0x00, 0xFFFFED00); - upmc_write (0x01, 0xCCFFCC00); - upmc_write (0x02, 0x00FFCF00); - upmc_write (0x03, 0x00FFCF00); - upmc_write (0x04, 0x00FFDC00); - upmc_write (0x05, 0x00FFCF00); - upmc_write (0x06, 0x00FFED00); - upmc_write (0x07, 0x3FFFCC07); - - /* Initialize UPMC for CAN: single write */ - upmc_write (0x18, 0xFFFFED00); - upmc_write (0x19, 0xCCFFEC00); - upmc_write (0x1A, 0x00FFED80); - upmc_write (0x1B, 0x00FFED80); - upmc_write (0x1C, 0x00FFFC00); - upmc_write (0x1D, 0x0FFFEC00); - upmc_write (0x1E, 0x0FFFEF00); - upmc_write (0x1F, 0x3FFFEC05); -#endif /* CONFIG_CAN_DRIVER */ -} - -/* - * Initialize PCI Devices, report devices found. - */ - -#ifdef CONFIG_PCI1 -static struct pci_controller pci1_hose; -#endif /* CONFIG_PCI1 */ - -void pci_init_board (void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int first_free_busno = 0; -#ifdef CONFIG_PCI1 - struct fsl_pci_info pci_info; - int pcie_ep; - - u32 devdisr = in_be32(&gur->devdisr); - - uint pci_32 = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_PCI32; - uint pci_arb = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_ARB; - uint pci_speed = CONFIG_SYS_CLK_FREQ; /* PCI PSPEED in [4:5] */ - uint pci_clk_sel = in_be32(&gur->porpllsr) & MPC85xx_PORDEVSR_PCI1_SPD; - - if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - SET_STD_PCI_INFO(pci_info, 1); - set_next_law(pci_info.mem_phys, - law_size_bits(pci_info.mem_size), pci_info.law); - set_next_law(pci_info.io_phys, - law_size_bits(pci_info.io_size), pci_info.law); - - pcie_ep = fsl_setup_hose(&pci1_hose, pci_info.regs); - printf("PCI1: %d bit, %s MHz, %s, %s, %s\n", - (pci_32) ? 32 : 64, - (pci_speed == 33333333) ? "33" : - (pci_speed == 66666666) ? "66" : "unknown", - pci_clk_sel ? "sync" : "async", - pcie_ep ? "agent" : "host", - pci_arb ? "arbiter" : "external-arbiter"); - first_free_busno = fsl_pci_init_port(&pci_info, - &pci1_hose, first_free_busno); -#ifdef CONFIG_PCIX_CHECK - if (!(in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1)) { - ushort reg16 = - PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ | - PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; - uint dev = PCI_BDF(0, 0, 0); - - /* PCI-X init */ - if (CONFIG_SYS_CLK_FREQ < 66000000) - puts ("PCI-X will only work at 66 MHz\n"); - - pci_write_config_word(dev, PCIX_COMMAND, reg16); - } -#endif - } else { - printf("PCI1: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); -#endif - - fsl_pcie_init_board(first_free_busno); -} - -#ifdef CONFIG_OF_BOARD_SETUP -void ft_board_setup (void *blob, bd_t *bd) -{ - ft_cpu_setup (blob, bd); - - FT_FSL_PCI_SETUP; -} -#endif /* CONFIG_OF_BOARD_SETUP */ - -#ifdef CONFIG_BOARD_EARLY_INIT_R -int board_early_init_r (void) -{ -#ifdef CONFIG_PS2MULT - ps2mult_early_init (); -#endif /* CONFIG_PS2MULT */ - return (0); -} -#endif /* CONFIG_BOARD_EARLY_INIT_R */ - -int board_eth_init(bd_t *bis) -{ - cpu_eth_init(bis); /* Intialize TSECs first */ - return pci_eth_init(bis); -} diff --git a/boards.cfg b/boards.cfg index f789539..26062c2 100644 --- a/boards.cfg +++ b/boards.cfg @@ -831,13 +831,6 @@ BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freesca stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M -TQM8540 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8540,TQM8540=y,HOSTNAME=tqm8540,BOARDNAME="TQM8540" -TQM8541 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8541,TQM8541=y,HOSTNAME=tqm8541,BOARDNAME="TQM8541" -TQM8548 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548=y,HOSTNAME=tqm8548,BOARDNAME="TQM8548" -TQM8548_AG powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548_AG=y,HOSTNAME=tqm8485,BOARDNAME="TQM8548_AG" -TQM8548_BE powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548_BE=y,HOSTNAME=tqm8548,BOARDNAME="TQM8548_BE" -TQM8555 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8555,TQM8555=y,HOSTNAME=tqm8555,BOARDNAME="TQM8555" -TQM8560 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8560,TQM8560=y,HOSTNAME=tqm8560,BOARDNAME="TQM8560" xpedite520x powerpc mpc85xx - xes xpedite537x powerpc mpc85xx - xes xpedite550x powerpc mpc85xx - xes diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 5929a8e..d0f4716 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,8 +11,9 @@ easily if here is something they might want to dig for...

Board Arch CPU removed Commit last known maintainer/contact ============================================================================= -apollon arm omap24xx - 2012-09-06 Kyungmin Park kyungmin.park@samsung.com -tb0229 mips mips32 - 2011-12-12 +TQM85xx powerpc MPC85xx - - Stefan Roese sr@denx.de +apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park kyungmin.park@samsung.com +tb0229 mips mips32 3f3110d 2011-12-12 rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk wd@denx.de OXC powerpc MPC8240 309a292 2011-12-07 BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling fgottschling@eltec.de diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 31c174b..11eb167 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -57,7 +57,7 @@ static void fun_wait(struct fsl_upm_nand *fun) debug("unexpected busy state\n"); } else { /* - * If the R/B pin is not connected, like on the TQM8548, + * If the R/B pin is not connected, * a short delay is necessary. */ udelay(1); @@ -115,10 +115,10 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);

/* - * Some boards/chips needs this. At least the MPC8360E-RDK and - * TQM8548 need it. Probably weird chip, because I don't see - * any need for this on MPC8555E + Samsung K9F1G08U0A. Usually - * here are 0-2 unexpected busy states per block read. + * Some boards/chips needs this. At least the MPC8360E-RDK + * needs it. Probably weird chip, because I don't see any + * need for this on MPC8555E + Samsung K9F1G08U0A. Usually + * here are 0-2 unexpected busy states per block read. */ if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN) fun_wait(fun); diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h deleted file mode 100644 index 95455c4..0000000 --- a/include/configs/TQM85xx.h +++ /dev/null @@ -1,697 +0,0 @@ -/* - * (C) Copyright 2007 - * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de. - * - * (C) Copyright 2005 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * Wolfgang Denk wd@denx.de - * Copyright 2004 Freescale Semiconductor. - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao X.Xiao@motorola.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * TQM85xx (8560/40/55/41/48) board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */ - -#if defined(CONFIG_TQM8548_BE) -#define CONFIG_SYS_TEXT_BASE 0xfff80000 -#else -#define CONFIG_SYS_TEXT_BASE 0xfffc0000 -#endif - -#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE) -#define CONFIG_TQM8548 -#endif - -#define CONFIG_PCI -#ifndef CONFIG_TQM8548_AG -#define CONFIG_PCI1 /* PCI/PCI-X controller */ -#endif -#ifdef CONFIG_TQM8548 -#define CONFIG_PCIE1 /* PCI Express interface */ -#endif - -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCIX_CHECK /* PCIX olny works at 66 MHz */ -#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ - -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ - - /* - * Configuration for big NOR Flashes - * - * Define CONFIG_TQM_BIGFLASH for boards with more than 128 MiB NOR Flash. - * Please be aware, that this changes the whole memory map (new CCSRBAR - * address, etc). You have to use an adapted Linux kernel or FDT blob - * if this option is set. - */ -#undef CONFIG_TQM_BIGFLASH - -/* - * NAND flash support (disabled by default) - * - * Warning: NAND support will likely increase the U-Boot image size - * to more than 256 KB. Please adjust CONFIG_SYS_TEXT_BASE if necessary. - */ -#ifdef CONFIG_TQM8548_BE -#define CONFIG_NAND -#endif - -/* - * MPC8540 and MPC8548 don't have CPM module - */ -#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8548) -#define CONFIG_CPM2 1 /* has CPM2 */ -#endif - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE) -#define CONFIG_CAN_DRIVER /* CAN Driver support */ -#endif - -/* - * sysclk for MPC85xx - * - * Two valid values are: - * 33333333 - * 66666666 - * - * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz - * is likely the desired value here, so that is now the default. - * The board, however, can run at 66MHz. In any event, this value - * must match the settings of some switches. Details can be found - * in the README.mpc85xxads. - */ - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 33333333 -#endif - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x10000000 - -#ifdef CONFIG_TQM_BIGFLASH -#define CONFIG_SYS_CCSRBAR 0xA0000000 -#else -#define CONFIG_SYS_CCSRBAR 0xE0000000 -#endif -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* - * DDR Setup - */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ - -#if defined(CONFIG_TQM_BIGFLASH) || \ - (!defined(CONFIG_TQM8548_AG) && !defined(CONFIG_TQM8548_BE)) -#define CONFIG_SYS_PPC_DDR_WIMGE (MAS2_I | MAS2_G) -#define CONFIG_SYS_DDR_EARLY_SIZE_MB (512) -#else -#define CONFIG_SYS_PPC_DDR_WIMGE (0) -#define CONFIG_SYS_DDR_EARLY_SIZE_MB (2 * 1024) -#endif - -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#ifdef CONFIG_TQM8548_AG -#define CONFIG_VERY_BIG_RAM -#endif - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -#if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) -/* TQM8540 & 8560 need DLL-override */ -#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ -#define CONFIG_DDR_DEFAULT_CL 25 /* CAS latency 2,5 */ -#endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */ - -#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) || \ - defined(CONFIG_TQM8548) -#define CONFIG_DDR_DEFAULT_CL 30 /* CAS latency 3 */ -#endif /* CONFIG_TQM8541 || CONFIG_TQM8555 || CONFIG_TQM8548 */ - -/* - * Flash on the Local Bus - */ -#ifdef CONFIG_TQM_BIGFLASH -#define CONFIG_SYS_FLASH0 0xE0000000 -#define CONFIG_SYS_FLASH1 0xC0000000 -#else /* !CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_FLASH0 0xFC000000 -#define CONFIG_SYS_FLASH1 0xF8000000 -#endif /* CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 } - -#define CONFIG_SYS_LBC_FLASH_BASE CONFIG_SYS_FLASH1 /* Localbus flash start */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH */ - -/* Default ORx timings are for <= 41.7 MHz Local Bus Clock. - * - * Note: According to timing specifications external addr latch delay - * (EAD, bit #0) must be set if Local Bus Clock is > 83 MHz. - * - * For other Local Bus Clocks see following table: - * - * Clock/MHz CONFIG_SYS_ORx_PRELIM - * 166 0x.....CA5 - * 133 0x.....C85 - * 100 0x.....C65 - * 83 0x.....FA2 - * 66 0x.....C82 - * 50 0x.....C60 - * 42 0x.....040 - * 33 0x.....030 - * 25 0x.....020 - * - */ -#ifdef CONFIG_TQM_BIGFLASH -#define CONFIG_SYS_BR0_PRELIM 0xE0001801 /* port size 32bit */ -#define CONFIG_SYS_OR0_PRELIM 0xE0000040 /* 512MB Flash */ -#define CONFIG_SYS_BR1_PRELIM 0xC0001801 /* port size 32bit */ -#define CONFIG_SYS_OR1_PRELIM 0xE0000040 /* 512MB Flash */ -#else /* !CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_BR0_PRELIM 0xfc001801 /* port size 32bit */ -#define CONFIG_SYS_OR0_PRELIM 0xfc000040 /* 64MB Flash */ -#define CONFIG_SYS_BR1_PRELIM 0xf8001801 /* port size 32bit */ -#define CONFIG_SYS_OR1_PRELIM 0xfc000040 /* 64MB Flash */ -#endif /* CONFIG_TQM_BIGFLASH */ - -#define CONFIG_SYS_FLASH_CFI /* flash is CFI compat. */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector */ -#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* speed up output to Flash */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -/* - * Note: when changing the Local Bus clock divider you have to - * change the timing values in CONFIG_SYS_ORx_PRELIM. - * - * LCRR[00:03] CLKDIV: System (CCB) clock divider. Valid values are 2, 4, 8. - * LCRR[16:17] EADC : External address delay cycles. It should be set to 2 - * for Local Bus Clock > 83.3 MHz. - */ -#define CONFIG_SYS_LBC_LCRR 0x00030008 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ -#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_CCSRBAR \ - + 0x04010000) /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (~CONFIG_SYS_TEXT_BASE + 1)/* Reserved for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (384 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#if defined(CONFIG_TQM8560) - -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ - -#else /* !CONFIG_TQM8560 */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* PS/2 Keyboard */ -#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ -#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ -#define CONFIG_PS2SERIAL 2 /* .. on DUART2 */ -#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */ -#define CONFIG_BOARD_EARLY_INIT_R 1 - -#endif /* CONFIG_TQM8560 */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* CAN */ -#define CONFIG_SYS_CAN_BASE (CONFIG_SYS_CCSRBAR \ - + 0x03000000) /* CAN base address */ -#ifdef CONFIG_CAN_DRIVER -#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 KiB address mask */ -#define CONFIG_SYS_OR2_CAN (CONFIG_SYS_CAN_OR_AM | OR_UPM_BI) -#define CONFIG_SYS_BR2_CAN ((CONFIG_SYS_CAN_BASE & BR_BA) | \ - BR_PS_8 | BR_MS_UPMC | BR_V) -#endif /* CONFIG_CAN_DRIVER */ - -/* - * I2C - */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x48} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 - -/* I2C RTC */ -#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ - -/* I2C EEPROM */ -/* - * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work also). - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* more than one eeprom */ - -/* I2C SYSMON (LM75) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - -#ifndef CONFIG_PCIE1 -/* RapidIO MMU */ -#ifdef CONFIG_TQM_BIGFLASH -#define CONFIG_SYS_RIO_MEM_BASE 0xb0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_SIZE 0x10000000 /* 256M */ -#else /* !CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */ -#endif /* CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE -#endif /* CONFIG_PCIE1 */ - -/* NAND FLASH */ -#ifdef CONFIG_NAND - -#define CONFIG_NAND_FSL_UPM 1 - -#define CONFIG_MTD_NAND_ECC_JFFS2 1 /* use JFFS2 ECC */ - -/* address distance between chip selects */ -#define CONFIG_SYS_NAND_SELECT_DEVICE 1 -#define CONFIG_SYS_NAND_CS_DIST 0x200 - -#define CONFIG_SYS_NAND_SIZE 0x8000 -#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_CCSRBAR + 0x03010000) - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_SYS_NAND_MAX_CHIPS 2 /* Number of chips per device */ - -/* CS3 for NAND Flash */ -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_NAND_BASE & BR_BA) | \ - BR_PS_8 | BR_MS_UPMB | BR_V) -#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) | OR_UPM_BI) - -#define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */ - -#endif /* CONFIG_NAND */ - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BUS (CONFIG_SYS_CCSRBAR + 0x02000000) -#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BUS -#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */ - -#ifdef CONFIG_PCIE1 -/* - * General PCI express - * Addresses are mapped 1-1. - */ -#ifdef CONFIG_TQM_BIGFLASH -#define CONFIG_SYS_PCIE1_MEM_BUS 0xb0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_BUS 0xaf000000 -#else /* !CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_BUS 0xef000000 -#endif /* CONFIG_TQM_BIGFLASH */ -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS -#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */ -#endif /* CONFIG_PCIE1 */ - -#if defined(CONFIG_PCI) - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#define CONFIG_EEPRO100 -#undef CONFIG_TULIP - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ - -#endif /* CONFIG_PCI */ - - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define FEC_PHY_ADDR 3 -#define FEC_PHYIDX 0 -#define FEC_FLAGS 0 -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 - -#ifdef CONFIG_TQM8548 -/* - * TQM8548 has 4 ethernet ports. 4 ETSEC's. - * - * On the STK85xx Starterkit the ETSEC3/4 ports are on an - * additional adapter (AIO) between module and Starterkit. - */ -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "TSEC2" -#define CONFIG_TSEC4 1 -#define CONFIG_TSEC4_NAME "TSEC3" -#define TSEC3_PHY_ADDR 4 -#define TSEC4_PHY_ADDR 5 -#define TSEC3_PHYIDX 0 -#define TSEC4_PHYIDX 0 -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define CONFIG_HAS_ETH3 -#define CONFIG_HAS_ETH4 -#endif /* CONFIG_TQM8548 */ - -/* Options are TSEC[0-1], FEC */ -#define CONFIG_ETHPRIME "TSEC0" - -#if defined(CONFIG_TQM8540) -/* - * TQM8540 has 3 ethernet ports. 2 TSEC's and one FEC. - * The FEC port is connected on the same signals as the FCC3 port - * of the TQM8560 to the baseboard (STK85xx Starterkit). - * - * On the STK85xx Starterkit the X47/X50 jumper has to be set to - * a - d (X50.2 - 3) to enable the FEC port. - */ -#define CONFIG_MPC85XX_FEC 1 -#define CONFIG_MPC85XX_FEC_NAME "FEC" -#endif - -#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) -/* - * TQM8541/55 have 4 ethernet ports. 2 TSEC's and 2 FCC's. Only one FCC port - * can be used at once, since only one FCC port is available on the STK85xx - * Starterkit. - * - * To use this port you have to configure U-Boot to use the FCC port 1...2 - * and set the X47/X50 jumper to: - * FCC1: a - b (X47.2 - X50.2) - * FCC2: a - c (X50.2 - 1) - */ -#define CONFIG_ETHER_ON_FCC -#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */ -#endif - -#if defined(CONFIG_TQM8560) -/* - * TQM8560 has 5 ethernet ports. 2 TSEC's and 3 FCC's. Only one FCC port - * can be used at once, since only one FCC port is available on the STK85xx - * Starterkit. - * - * To use this port you have to configure U-Boot to use the FCC port 1...3 - * and set the X47/X50 jumper to: - * FCC1: a - b (X47.2 - X50.2) - * FCC2: a - c (X50.2 - 1) - * FCC3: a - d (X50.2 - 3) - */ -#define CONFIG_ETHER_ON_FCC -#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */ -#endif - -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1) -#define CONFIG_ETHER_ON_FCC1 -#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \ - CMXFCR_TF1CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) -#endif - -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2) -#define CONFIG_ETHER_ON_FCC2 -#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \ - CMXFCR_TF2CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) -#endif - -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3) -#define CONFIG_ETHER_ON_FCC3 -#define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \ - CMXFCR_TF3CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) -#endif - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 - -#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K (one sector) for env */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_TIMESTAMP /* Print image info with ts */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -#ifdef CONFIG_NAND -/* - * Use NAND-FLash as JFFS2 device - */ -#define CONFIG_CMD_NAND -#define CONFIG_CMD_JFFS2 - -#define CONFIG_JFFS2_NAND 1 - -#ifdef CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nand0=TQM85xx-nand" -#define MTDPARTS_DEFAULT "mtdparts=TQM85xx-nand:-" -#else -#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ -#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_SIZE 0x200000 /* size of jffs2 partition */ -#endif /* CONFIG_CMD_MTDPARTS */ - -#endif /* CONFIG_NAND */ - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP -#ifndef CONFIG_TQM8548_AG -#define CONFIG_CMD_DATE -#endif -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DTT -#define CONFIG_CMD_MII -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buf Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -#define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/ - -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - - -/* - * Setup some board specific values for the default environment variables - */ -#ifdef CONFIG_CPM2 -#define CONFIG_ENV_CONSDEV "consdev=ttyCPM0\0" -#else -#define CONFIG_ENV_CONSDEV "consdev=ttyS0\0" -#endif -#define CONFIG_ENV_FDT_FILE "fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \ - MK_STR(CONFIG_HOSTNAME)".dtb\0" -#define CONFIG_ENV_BOOTFILE "bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0" -#define CONFIG_ENV_UBOOT "uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \ - "uboot_addr="MK_STR(CONFIG_SYS_TEXT_BASE)"\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_ENV_BOOTFILE \ - CONFIG_ENV_FDT_FILE \ - CONFIG_ENV_CONSDEV \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask" \ - ":$hostname:$netdev:off panic=1\0" \ - "addcons=setenv bootargs $bootargs " \ - "console=$consdev,$baudrate\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm $kernel_addr - $fdt_addr\0" \ - "flash_self=run ramargs addip addcons;" \ - "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \ - "net_nfs=tftp $kernel_addr_r $bootfile;" \ - "tftp $fdt_addr_r $fdt_file;" \ - "run nfsargs addip addcons;" \ - "bootm $kernel_addr_r - $fdt_addr_r\0" \ - "rootpath=/opt/eldk/ppc_85xx\0" \ - "fdt_addr_r=900000\0" \ - "kernel_addr_r=1000000\0" \ - "fdt_addr=ffec0000\0" \ - "kernel_addr=ffd00000\0" \ - "ramdisk_addr=ff800000\0" \ - CONFIG_ENV_UBOOT \ - "load=tftp 100000 $uboot\0" \ - "update=protect off $uboot_addr +$filesize;" \ - "erase $uboot_addr +$filesize;" \ - "cp.b 100000 $uboot_addr $filesize" \ - "upd=run load update\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - -#endif /* __CONFIG_H */