The header it littered with #ifdefs and #defines and that appear to be legacy associations to the older da850-evm and in some cases obsolete with either Kconfig or DM migrations. This patch removes these legacy references.

Signed-off-by: Adam Ford aford173@gmail.com

diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index cab402a484..1c41e7e97a 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -13,8 +13,6 @@ /* * Board */ -#undef CONFIG_USE_SPIFLASH -#undef CONFIG_SYS_USE_NOR

/* * SoC Configuration @@ -104,21 +102,10 @@ * Serial Driver info */ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#if !defined(CONFIG_DM_SERIAL) -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#endif

#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)

-#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000 -#endif - /* * I2C Configuration */ @@ -168,24 +155,6 @@ #define CONFIG_SPL_NAND_LOAD #endif

-#ifdef CONFIG_SYS_USE_NOR -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3) -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE -#define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */ -#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\ - + 3) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ -#endif - -#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_ENV_SIZE (64 << 10) -#define CONFIG_ENV_OFFSET (256 << 10) -#define CONFIG_ENV_SECT_SIZE (64 << 10) -#endif - /* * Network & Ethernet Configuration */ @@ -244,12 +213,6 @@ #define CONFIG_CLOCKS #endif

-#if !defined(CONFIG_NAND) && \ - !defined(CONFIG_SYS_USE_NOR) && \ - !defined(CONFIG_USE_SPIFLASH) -#define CONFIG_ENV_SIZE (16 << 10) -#endif - /* SD/MMC */

#ifdef CONFIG_ENV_IS_IN_MMC @@ -259,7 +222,6 @@ #define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ #endif

-#ifndef CONFIG_DIRECT_NOR_BOOT /* defines for SPL */ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) @@ -267,7 +229,6 @@ #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_MAX_FOOTPRINT 32768 #define CONFIG_SPL_PAD_TO 32768 -#endif

/* additions for new relocation code, must added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0xc0000000