Hi, Tom.

The following changes since commit 37a7908137a8c904f43c83f3e6c269cd51bf6126:

ARM: dts: rmobile: Update DTS to match Linux 4.13 (2017-09-12 23:01:51 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-sh.git rmobile

for you to fetch changes up to 17cf99a5bb904a6e7c8797db2632bbe65ae1cfb5:

ARM: rmobile: dts: Add SDR104/HS200 to Salvator-X (2017-10-10 08:22:54 +0900)

---------------------------------------------------------------- Marek Vasut (29): ARM: rmobile: dts: Add EHCI USB nodes to r8a7796 ARM: rmobile: Move HSUSB configuration to board on Salvator-X ARM: rmobile: Move HSUSB configuration to board on ULCB ARM: rmobile: Enable EHCI generic on Salvator-X ARM: rmobile: Enable EHCI generic on ULCB ARM: rmobile: dts: Add XHCI USB node to r8a7796 ARM: rmobile: Move CONFIG_CMD_ from rcar-gen3-common to configs ARM: rmobile: Place initial stack right below U-Boot clk: rmobile: Add support for setting SDxCKCR clk: rmobile: Add RPC hyperflash clock net: ravb: Add PHY reset GPIO support serial: sh: Enable clock if available ARM: dts: rmobile: Add PHY reset GPIO ARM: rmobile: Remove SD clock configuration from board files ARM: rmobile: Remove AVB clock configuration from board files ARM: rmobile: Remove SCIF clock configuration from board files ARM: rmobile: Enable GPIO command ARM: rmobile: Switch to UniPhier SD driver on Gen3 ARM: rmobile: Enable DM regulator support pinctrl: rmobile: Add Renesas RCar pincontrol driver gpio: rmobile: Add Renesas RCar GPIO driver ARM: rmobile: Switch to DM PFC pinmux and GPIO driver ARM: rmobile: Zap ad-hoc PFC and GPIO setup in board files usb: Drop the EHCI RCar Gen3 pinctrl: rmobile: Add pinconf to Renesas RCar pincontrol driver ARM: rmobile: Enable pinconf doc: rmobile: Update README ARM: rmobile: Fixup ULCB CPLD support after PFC rework ARM: rmobile: dts: Add SDR104/HS200 to Salvator-X

arch/arm/dts/r8a7796.dtsi | 59 +- arch/arm/dts/salvator-common.dtsi | 10 + arch/arm/dts/ulcb.dtsi | 1 + board/renesas/salvator-x/salvator-x.c | 152 +--- board/renesas/ulcb/cpld.c | 8 +- board/renesas/ulcb/ulcb.c | 114 +-- configs/r8a7795_salvator-x_defconfig | 16 +- configs/r8a7795_ulcb_defconfig | 17 +- configs/r8a7796_salvator-x_defconfig | 16 +- configs/r8a7796_ulcb_defconfig | 17 +- doc/README.rmobile | 41 +- drivers/clk/renesas/clk-rcar-gen3.c | 78 +- drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-rcar.c | 169 +++++ drivers/net/ravb.c | 13 + drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/renesas/Kconfig | 31 + drivers/pinctrl/renesas/Makefile | 3 + drivers/pinctrl/renesas/pfc-r8a7795.c | 4898 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/renesas/pfc-r8a7796.c | 5728 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/renesas/pfc.c | 752 +++++++++++++++++++ drivers/pinctrl/renesas/sh_pfc.h | 575 +++++++++++++++ drivers/serial/serial_sh.c | 9 +- drivers/usb/host/Kconfig | 8 - drivers/usb/host/Makefile | 1 - drivers/usb/host/ehci-rcar_gen3.c | 106 --- include/configs/rcar-gen3-common.h | 8 +- 29 files changed, 12455 insertions(+), 384 deletions(-) create mode 100644 drivers/gpio/gpio-rcar.c create mode 100644 drivers/pinctrl/renesas/Kconfig create mode 100644 drivers/pinctrl/renesas/Makefile create mode 100644 drivers/pinctrl/renesas/pfc-r8a7795.c create mode 100644 drivers/pinctrl/renesas/pfc-r8a7796.c create mode 100644 drivers/pinctrl/renesas/pfc.c create mode 100644 drivers/pinctrl/renesas/sh_pfc.h delete mode 100644 drivers/usb/host/ehci-rcar_gen3.c