[U-Boot] [PATCH] mx31pdk: Remove watchdog support
The conversion of mx31pdk to SPL NAND fixed the boot issue, but we start seeing resets in loop, which prevents us from reaching the U-boot prompt.
Until the proper fix can be identified, disable watchdog, so that mx31pdk can be functional again.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- include/configs/mx31pdk.h | 2 -- 1 file changed, 2 deletions(-)
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 34e4295..da894c4 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -60,8 +60,6 @@
#define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_HW_WATCHDOG -#define CONFIG_IMX_WATCHDOG #define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI
On 09/04/2013 21:03, Fabio Estevam wrote:
The conversion of mx31pdk to SPL NAND fixed the boot issue, but we start seeing resets in loop, which prevents us from reaching the U-boot prompt.
Until the proper fix can be identified, disable watchdog, so that mx31pdk can be functional again.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
Hi Fabio,
include/configs/mx31pdk.h | 2 -- 1 file changed, 2 deletions(-)
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 34e4295..da894c4 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -60,8 +60,6 @@
#define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_HW_WATCHDOG -#define CONFIG_IMX_WATCHDOG #define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI
Benoit's patchset will flow into the release - then this one should also be merged.
Acked-by: Stefano Babic sbabic@denx.de
Best regards, Stefano Babic
Hi Fabio,
On Tue, 9 Apr 2013 16:03:52 -0300, Fabio Estevam fabio.estevam@freescale.com wrote:
The conversion of mx31pdk to SPL NAND fixed the boot issue, but we start seeing resets in loop, which prevents us from reaching the U-boot prompt.
Until the proper fix can be identified, disable watchdog, so that mx31pdk can be functional again.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
include/configs/mx31pdk.h | 2 -- 1 file changed, 2 deletions(-)
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 34e4295..da894c4 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -60,8 +60,6 @@
#define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_HW_WATCHDOG -#define CONFIG_IMX_WATCHDOG #define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI
Applied to u-boot-arm/master, thanks!
Amicalement,
participants (3)
-
Albert ARIBAUD -
Fabio Estevam -
Stefano Babic