On 26.02.21 08:51, Stefan Roese wrote:

From: Jagannadha Sutradharudu Teki jagannadha.sutradharudu-teki@xilinx.com

We had a problem detecting 8/16bit flash devices connected only via 8bits to the SoC for quite a while. Commit 239cb9d9 [mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support] finally fixed this 8-bit bus support. But also broke some other boards using this cfi driver. So this patch had to be reverted.

I spotted a different, simpler approach for this 8-bit bus support on the barebox mailing list posted by Oleksij Rempel bug-track@fisher-privat.net:

http://www.spinics.net/lists/u-boot-v2/msg14687.html

Here the commit text:

" Many cfi chips support 16 and 8 bit modes. Most important difference is use of so called "Q15/A-1" pin. In 16bit mode this pin is used for data IO. In 8bit mode, it is an address input which add one more least significant bit (LSB). In this case we should shift all adresses by one: For example 0xaa << 1 = 0x154 "

This patch now is a port of this barebox patch to U-Boot.

Along with the change w.r.t from barebox, Some flash chips can support multiple bus widths, override the interface width and limit it to the port width.

Tested on 16-bit Spansion flash on sequoia. Tested 8-bit flashes like 256M29EW, 512M29EW.

Signed-off-by: Stefan Roese sr@denx.de Tested-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com Cc: Jagannadha Sutradharudu Teki jaganna@xilinx.com Cc: Aaron Williams awilliams@marvell.com Cc: Chandrakala Chavva cchavva@marvell.com Cc: Andre Przywara andre.przywara@arm.com Cc: Vignesh Raghavendra vigneshr@ti.com Cc: Simon Glass sjg@chromium.org Cc: Mario Six mario.six@gdsys.cc Cc: York Sun york.sun@nxp.com Cc: Marek Vasut marek.vasut+renesas@gmail.com

---

v2:

• Rebase on current mainline

I've run into problems with CFI flash on the MIPS Octeon EBB7304, where the CFI detection did not work. While testing and digging through the very old CFI related patches, I stumbled over this patch which fixes the problems on the EBB7304.

I would really like to see some further testing of this patch on other boards using CFI parallel flash though. That's why I added some developers who did send CFI related patches in the last few years. So please test with this patch applied if possible.

Thanks, Stefan

Unfortunately it did not receive any tests on other platforms yet. That's why I'm pulling this patch early in the merge window, so that it has a longer time for testing in master.

Applied to u-boot-cfi-flash/master

Thanks, Stefan

drivers/mtd/cfi_flash.c | 37 +++++++++++++++++++++++++++++++++---- include/flash.h | 2 ++ 2 files changed, 35 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index b4512e3a5f..9642d7c7dc 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -218,7 +218,7 @@ flash_map(flash_info_t *info, flash_sect_t sect, uint offset) { unsigned int byte_offset = offset * info->portwidth;

• return (void *)(info->start[sect] + byte_offset);

• return (void *)(info->start[sect] + (byte_offset << info->chip_lsb)); }

  static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,

@@ -1918,12 +1918,27 @@ static int __flash_detect_cfi(flash_info_t *info, struct cfi_qry *qry) flash_read_cfi(info, qry, FLASH_OFFSET_CFI_RESP, sizeof(struct cfi_qry)); info->interface = le16_to_cpu(qry->interface_desc);

• 	/* Some flash chips can support multiple bus widths.
  

• 	 * In this case, override the interface width and
  

• 	 * limit it to the port width.
  

• 	 */
  

• 	if ((info->interface == FLASH_CFI_X8X16) &&
  

• 			(info->portwidth == FLASH_CFI_8BIT)) {
  

• 		debug("Overriding 16-bit interface width to"
  

• 				" 8-bit port width\n");
  

• 		info->interface = FLASH_CFI_X8;
  

• 	} else if ((info->interface == FLASH_CFI_X16X32) &&
  

• 			(info->portwidth == FLASH_CFI_16BIT)) {
  

• 		debug("Overriding 16-bit interface width to"
  

• 				" 16-bit port width\n");
  

• 		info->interface = FLASH_CFI_X16;
  

• 	}
  
  info->cfi_offset = flash_offset_cfi[cfi_offset];
  debug("device interface is %d\n",
        info->interface);
  

• 	debug("found port %d chip %d ",
  

• 	      info->portwidth, info->chipwidth);
  

• 	debug("found port %d chip %d chip_lsb %d ",
  

• 	      info->portwidth, info->chipwidth, info->chip_lsb);
  debug("port %d bits chip %d bits\n",
        info->portwidth << CFI_FLASH_SHIFT_WIDTH,
        info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
  

@@ -1962,9 +1977,23 @@ static int flash_detect_cfi(flash_info_t *info, struct cfi_qry *qry) info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) { for (info->chipwidth = FLASH_CFI_BY8; info->chipwidth <= info->portwidth;

•      info->chipwidth <<= 1)
  

•      info->chipwidth <<= 1) {
  

• 	/*
  

• 	 * First, try detection without shifting the addresses
  

• 	 * for 8bit devices (16bit wide connection)
  

• 	 */
  

• 	info->chip_lsb = 0;
  

• 	if (__flash_detect_cfi(info, qry))
  

• 		return 1;
  

• 	/*
  

• 	 * Not detected, so let's try with shifting
  

• 	 * for 8bit devices
  

• 	 */
  

• 	info->chip_lsb = 1;
  if (__flash_detect_cfi(info, qry))
  	return 1;
  

• }
  

  } debug("not found\n"); return 0;

diff --git a/include/flash.h b/include/flash.h index 3bf6b22399..42b18a6047 100644 --- a/include/flash.h +++ b/include/flash.h @@ -24,6 +24,8 @@ typedef struct { #ifdef CONFIG_SYS_FLASH_CFI uchar portwidth; /* the width of the port */ uchar chipwidth; /* the width of the chip */

• uchar chip_lsb; /* extra Least Significant Bit in the */

• 			/* address of chip	*/
  

  ushort buffer_size; /* # of bytes in write buffer */ ulong erase_blk_tout; /* maximum block erase timeout */ ulong write_tout; /* maximum write timeout */

Viele Grüße, Stefan