[PATCH] doc: csf_examples: csf.sh: Remove unneeded export ATF_LOAD_ADDR line
From: Fabio Estevam festevam@denx.de
Originally, exporting the ATF_LOAD_ADDR was required, but since binman has been used to generate the flash.bin, it is no longer needed to do such manual export.
The ATF address is now passed via binman.
Remove the unneeded export ATF_LOAD_ADDR line.
Signed-off-by: Fabio Estevam festevam@denx.de --- doc/imx/habv4/csf_examples/mx8m/csf.sh | 1 - 1 file changed, 1 deletion(-)
diff --git a/doc/imx/habv4/csf_examples/mx8m/csf.sh b/doc/imx/habv4/csf_examples/mx8m/csf.sh index d87015f6c4e2..65c143073cbe 100644 --- a/doc/imx/habv4/csf_examples/mx8m/csf.sh +++ b/doc/imx/habv4/csf_examples/mx8m/csf.sh @@ -11,7 +11,6 @@
# 1) Build U-Boot (e.g. for i.MX8MM) # -# export ATF_LOAD_ADDR=0x920000 # cp -Lv /path/to/arm-trusted-firmware/build/imx8mm/release/bl31.bin . # cp -Lv /path/to/firmware-imx-8.14/firmware/ddr/synopsys/ddr3* . # make -j imx8mm_board_defconfig
On 8/15/2023 9:48 PM, Fabio Estevam wrote:
From: Fabio Estevam festevam@denx.de
Originally, exporting the ATF_LOAD_ADDR was required, but since binman has been used to generate the flash.bin, it is no longer needed to do such manual export.
The ATF address is now passed via binman.
Remove the unneeded export ATF_LOAD_ADDR line.
Signed-off-by: Fabio Estevam festevam@denx.de
Acked-by: Peng Fan peng.fan@nxp.com
participants (2)
-
Fabio Estevam -
Peng Fan