Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows to pciauto_setup_device has the side effect of not getting COMMAND_MEMORY set.

Signed-off-by: Ed Swarthout Ed.Swarthout@freescale.com ---

This fixes the PCI ethernet card problem that use dma for the mpc8544ds and mpc8610hpcd boards.

drivers/fsl_pci_init.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/drivers/fsl_pci_init.c b/drivers/fsl_pci_init.c index 6394234..e0c3bed 100644 --- a/drivers/fsl_pci_init.c +++ b/drivers/fsl_pci_init.c @@ -54,6 +54,7 @@ fsl_pci_init(struct pci_controller *hose) u8 temp8; int r; int bridge; + int inbound = 0; volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr; pci_dev_t dev = PCI_BDF(busno,0,0);

@@ -74,6 +75,7 @@ fsl_pci_init(struct pci_controller *hose) PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | (__ilog2(hose->regions[r].size) - 1); pi++; + inbound = hose->regions[r].size > 0; } else { /* Outbound */ po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff; po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff; @@ -138,6 +140,12 @@ fsl_pci_init(struct pci_controller *hose) pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io);

+ if (inbound) { + pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16); + pci_hose_write_config_word(hose, dev, PCI_COMMAND, + temp16 | PCI_COMMAND_MEMORY); + } + #ifndef CONFIG_PCI_NOSCAN printf (" Scanning PCI bus %02x\n", hose->current_busno); hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno);