I'm working on a project porting the latest version of u-boot to a dm365evm based board from Appro [1]. The board is a bit different, but most of the changes are to the /include/configs/<board>.h file. Should I contribute the code when it's working? How should i proceed? This board came with a old version of u-boot (1.3.4).
Thank you,
[1] http://www.appropho.com/NewWeb/Product_DM365IMX035.php
-- Henrique Camargo
Dear Henrique Camargo,
In message AANLkTinQ9+4w7pYKXd2d=OUKnRs5JV0RFANv2V7V_-rw@mail.gmail.com you wrote:
I'm working on a project porting the latest version of u-boot to a dm365evm based board from Appro [1]. The board is a bit different, but most of the changes are to the /include/configs/<board>.h file. Should I contribute the code when it's working? How should i proceed? This board came with a old version of u-boot (1.3.4).
Yes, please contribute your changes back.
See http://www.denx.de/wiki/U-Boot/Patches or ask if you need help.
Best regards,
Wolfgang Denk
participants (2)
-
Henrique Camargo -
Wolfgang Denk