Dear Albert ARIBAUD,

In message 4F4BE62C.1000402@aribaud.net you wrote:

Hi Wolfgang,

The following changes since commit 54e96680cb96fb7a4b8f43fd949c62054004d3e5:

Merge branch 'master' of git://git.denx.de/u-boot-microblaze (2012-02-26 22:17:40 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-arm master

Aneesh V (1): armv7: omap3: leave outer cache enabled

Chase Maupin (1): am33xx: ddr_defs.h: Change DDR timings

Daniel Gorsulowski (2): at91: modified NAND flash timing on meesc board at91: modified NAND flash timing on otc570 board

Detlev Zundel (1): mcx: Enable command line editing

Eric Nelson (6): mx6q: define GPIO macros for translating between ordinals and port:index mxc_spi: move machine specifics into CPU headers mx6q: Add support for ECSPI through mxc_spi driver mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash

Fabio Estevam (7): mx53loco: Use gpio_direction_input prior to gpio_get_value mx53ard: Use gpio_direction_input prior to gpio_get_value mx53evk: Use gpio_direction_input prior to gpio_get_value mx53smd: Use gpio_direction_input prior to gpio_get_value mx51evk: Use gpio_direction_input prior to gpio_get_value mx35: generic: Let get_reset_cause be defined only when CONFIG_DISPLAY_CPUINFO is selected mx35pdk: Remove duplicate CPU revision and reset cause information

Hadli, Manjunath (3): davinci: cleanup davinci_sync_env_enetaddr() fucntion da850evm: add support to read mac address from SPI flash da850evm: read mac address from I2C EEPROM on AM18x EVM

Helmut Raiger (3): tt01: fix environment size tt01: add video support tt01: fix hush parser config, add release config

Linus Walleij (3): integrator: stop calling pci_init() twice integrator: rewrite the AP PCI driver integrator: update the Integrator/CP config

Marek Vasut (2): i.MX28: Fix VDDIO and VDDA setup MX28: Fix get_timer() / get_tbclk() issue

Matthias Fuchs (4): mx28evk: add RTC support mx28evk: add USB support mx28evk: add SPI support mx28: fix SPL code to make USB booting work

Peter Meerwald (1): beagle: enable DVI_PUP

Shawn Guo (1): common/image.c: align usage of fdt_high with initrd_high

Stefano Babic (4): MX35: add missing get_ticks() and get_tbclk() MX31: add missing get_tbclk() MX5/MX6: add missing get_ticks() and get_tbclk() MX27: add missing get_tbclk()

Thomas Weber (2): Tricorder: Switch env to generic mmc driver OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL

Tom Rini (2): am335x_evm: Change MAINTAINERS entry omap3_beagle: Change MAINTAINERS entry

Troy Kisky (5): net: fec_mxc: add 1000 Mbps selection net: fec_mxc: add PHYLIB support net: phy: add support for Micrel's KSZ9021 net: phy: make board_phy_config responsible for calling drv->config i.mx6q: mx6qsabrelite: Update the network configuration

prabhakar.csengg@gmail.com (1): dm6467Tevm: Use a common configuration file for davinci_dm6467evm and davinci_dm6467Tevm

MAINTAINERS | 10 +- README | 8 + arch/arm/cpu/arm1136/mx31/timer.c | 9 + arch/arm/cpu/arm1136/mx35/generic.c | 2 +- arch/arm/cpu/arm1136/mx35/timer.c | 103 +++-- arch/arm/cpu/arm926ejs/davinci/cpu.c | 2 +- arch/arm/cpu/arm926ejs/davinci/misc.c | 9 +- arch/arm/cpu/arm926ejs/mx27/timer.c | 5 + arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 16 +- arch/arm/cpu/arm926ejs/mx28/start.S | 21 +- arch/arm/cpu/arm926ejs/mx28/timer.c | 19 +- arch/arm/cpu/armv7/imx-common/timer.c | 75 +++- arch/arm/cpu/armv7/omap3/board.c | 2 +- arch/arm/include/asm/arch-am33xx/ddr_defs.h | 2 +- arch/arm/include/asm/arch-mx31/imx-regs.h | 27 ++ arch/arm/include/asm/arch-mx31/sys_proto.h | 1 + arch/arm/include/asm/arch-mx35/imx-regs.h | 25 + arch/arm/include/asm/arch-mx5/imx-regs.h | 30 ++ arch/arm/include/asm/arch-mx6/imx-regs.h | 49 ++ board/armltd/integrator/integrator.c | 3 - board/armltd/integrator/pci.c | 582 ++++++++++++++----------- board/armltd/integrator/pci_v3.h | 200 +++++++++ board/davinci/da8xxevm/da850evm.c | 103 +++++ board/davinci/dm6467evm/dm6467evm.c | 2 +- board/esd/meesc/meesc.c | 8 +- board/esd/otc570/otc570.c | 8 +- board/freescale/corenet_ds/eth_p4080.c | 2 + board/freescale/mpc8544ds/mpc8544ds.c | 2 + board/freescale/mx28evk/iomux.c | 8 + board/freescale/mx28evk/mx28evk.c | 7 + board/freescale/mx35pdk/mx35pdk.c | 27 +-- board/freescale/mx51evk/mx51evk.c | 2 + board/freescale/mx53ard/mx53ard.c | 2 + board/freescale/mx53evk/mx53evk.c | 2 + board/freescale/mx53loco/mx53loco.c | 2 + board/freescale/mx53smd/mx53smd.c | 1 + board/freescale/mx6qsabrelite/imximage.cfg | 2 +- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 68 ++-- board/hale/tt01/tt01.c | 21 + board/ti/beagle/beagle.c | 34 ++ boards.cfg | 8 +- common/image.c | 12 +- drivers/net/fec_mxc.c | 165 +++++--- drivers/net/fec_mxc.h | 7 + drivers/net/phy/micrel.c | 87 ++++ drivers/net/phy/phy.c | 5 +- drivers/spi/mxc_spi.c | 93 +---- include/configs/davinci_dm6467Tevm.h | 167 ------- include/configs/davinci_dm6467evm.h | 1 - include/configs/integratorap.h | 148 +------ include/configs/integratorcp.h | 47 +-- include/configs/mcx.h | 7 +- include/configs/mx28evk.h | 64 +++- include/configs/mx6qsabrelite.h | 31 ++- include/configs/omap3_overo.h | 4 - include/configs/tricorder.h | 12 +- include/configs/tt01.h | 40 ++- include/micrel.h | 16 + include/phy.h | 1 + 59 files changed, 1495 insertions(+), 921 deletions(-) create mode 100644 board/armltd/integrator/pci_v3.h delete mode 100644 include/configs/davinci_dm6467Tevm.h create mode 100644 include/micrel.h

Applied, thanks.

Best regards,

Wolfgang Denk