Updated doc/README.zynq to current status.

Signed-off-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com --- V2: none

doc/README.zynq | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/doc/README.zynq b/doc/README.zynq index 7cb87e3..732ef3f 100644 --- a/doc/README.zynq +++ b/doc/README.zynq @@ -28,7 +28,16 @@ and I/O programmability. - zc770-xm012 (nor) - zc770-xm013 (dual parallel qspi, gem1)

-3. Bootmode +3. Building + +# Configure for microzed board + $ make zynq_microzed_config + Configuring for zynq_microzed board... + +# Building + $ make DEVICE_TREE=zynq-microzed + +4. Bootmode

Zynq has a facility to read the bootmode from the slcr bootmode register once user is setting through jumpers on the board - see page no:1546 on [5] @@ -50,11 +59,11 @@ SLCR bootmode register Bit[3:0] values "modeboot" variable can assign any of "qspiboot", "norboot", "nandboot", "sdboot" or "jtagboot" bootmode strings at runtime.

-4. Mainline status +5. Mainline status

- Added basic board configurations support. - Added zynq u-boot bsp code - arch/arm/cpu/armv7/zynq -- Added zynq boards named - zynq, zynq_dcc +- Add zynq boards support - zc70x, zed, microzed, zc770 - Added zynq drivers: serial - drivers/serial/serial_zynq.c net - drivers/net/zynq_gem.c @@ -62,15 +71,15 @@ SLCR bootmode register Bit[3:0] values mmc - drivers/mmc/zynq_sdhci.c spi- drivers/spi/zynq_spi.c i2c - drivers/i2c/zynq_i2c.c + qspi - drivers/spi/zynq_qspi.c + nand - drivers/mtd/nand/zynq_nand.c +- Done proper cleanups on board configurations +- Added basic FDT support for zynq boards +- d-cache support for zynq_gem.c

-5. TODO +6. TODO

-- Add zynq boards support - zc70x, zed, microzed, zc770 -- Add zynq qspi controller driver -- Add zynq nand controller driver -- d-cache support for zynq_gem.c -- FDT support for zynq boards -- Need proper cleanups on board configurations +- Add FDT support on individual drivers.

[1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm [2] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm