From: Roy Zang tie-fei.zang@freescale.com

PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of PCIE1 bit. On MPC8572DS board, PCIE refers to PCIE1. Signed-off-by: Roy Zang tie-fei.zang@freescale.com --- board/freescale/mpc8572ds/mpc8572ds.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 11c30b2..e57f9ff 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -170,7 +170,7 @@ void pci_init_board(void) struct pci_region *r = hose->regions; u32 temp32;

- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ printf ("\n PCIE3 connected to ULI as %s (base address %x)", pcie_ep ? "End Point" : "Root Complex", (uint)pci); @@ -237,7 +237,7 @@ void pci_init_board(void) int pcie_configured = (io_sel == 0x3) || (io_sel == 0x7); struct pci_region *r = hose->regions;

- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", pcie_ep ? "End Point" : "Root Complex", (uint)pci);