fix the following building warning ---8>--- macb.c: In function 'macb_init': macb.c:400:14: warning: 'phydev' may be used uninitialized in this function macb.c:377:21: note: 'phydev' was declared here ---<8---

Signed-off-by: Bo Shen voice.shen@atmel.com

--- drivers/net/macb.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 1f7cc32..bf3983a 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -36,6 +36,7 @@ #include <asm/io.h> #include <asm/dma-mapping.h> #include <asm/arch/clk.h> +#include <asm-generic/errno.h>

#include "macb.h"

@@ -397,9 +398,14 @@ static int macb_phy_init(struct macb_device *macb) }

#ifdef CONFIG_PHYLIB - phydev->bus = macb->bus; - phydev->dev = netdev; - phydev->addr = macb->phy_addr; + /* need to consider other phy interface mode */ + phydev = phy_connect(macb->bus, macb->phy_addr, netdev, + PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + printf("phy_connect failed\n"); + return -ENODEV; + } + phy_config(phydev); #endif