[U-Boot] [PATCH v3 1/4] mkexynosspl: fix uninitialized buffer
mkexynos reads its input file which might be smaller than its read buffer, but always writes the whole buffer out. This does not affect the functionalyty of the output file, but it makes its content unpredictable as the end of the buffer is never initialized. Fix this by zeroing the buffer before reading the input file.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net --- Changes in v3: - fixed mkexynosspl uninitialized buffer
Changes in v2: None
tools/mkexynosspl.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/tools/mkexynosspl.c b/tools/mkexynosspl.c index ef685b7..8d605fa 100644 --- a/tools/mkexynosspl.c +++ b/tools/mkexynosspl.c @@ -72,6 +72,8 @@ int main(int argc, char **argv)
count = (len < CHECKSUM_OFFSET) ? len : CHECKSUM_OFFSET;
+ memset(buffer, 0, BUFSIZE); + if (read(ifd, buffer, count) != count) { fprintf(stderr, "%s: Can't read %s: %s\n", argv[0], argv[1], strerror(errno));
Newly added cm_t335 was missed in commit 47ed5dd0 which made ARM targets produce full ELF files. Fix its linker script.
This change is binary-invariant when only .dynsym, .dynstr, .dynamic, .plt, .interp and .gun sections are declared.
Sections .hash, .got.plt, .dynbss and .ARM.exidx are also declared so that their (unused) content is moved out of the u-boot binary.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net --- Changes in v3: - fixed cm_t335 linker script
Changes in v2: None
board/compulab/cm_t335/u-boot.lds | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds index 3bd96e9..af4b88a 100644 --- a/board/compulab/cm_t335/u-boot.lds +++ b/board/compulab/cm_t335/u-boot.lds @@ -92,10 +92,14 @@ SECTIONS KEEP(*(.__bss_end)); }
- /DISCARD/ : { *(.dynsym) } - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } + .dynsym _end : { *(.dynsym) } + .hash : { *(.hash) } + .got.plt : { *(.got.plt) } + .dynbss : { *(.dynbss) } + .dynstr : { *(.dynstr*) } + .dynamic : { *(.dynamic*) } + .plt : { *(.plt*) } + .interp : { *(.interp*) } + .gnu : { *(.gnu*) } + .ARM.exidx : { *(.ARM.exidx*) } }
This prevents references to _end from generating absolute relocation records.
This change is binary invariant for ARM targets.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net --- Changes in v3: - Replace _end in linker scripts with _image_binary_end
Changes in v2: None
arch/arm/cpu/arm1136/u-boot-spl.lds | 6 +++++- arch/arm/cpu/arm920t/ep93xx/u-boot.lds | 5 ++++- arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 9 +++++++-- arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 9 +++++++-- arch/arm/cpu/armv7/am33xx/u-boot-spl.lds | 6 +++++- arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 6 +++++- arch/arm/cpu/armv7/socfpga/u-boot-spl.lds | 6 +++++- arch/arm/cpu/at91-common/u-boot-spl.lds | 6 +++++- arch/arm/cpu/ixp/u-boot.lds | 9 +++++++-- arch/arm/cpu/u-boot-spl.lds | 9 +++++++-- arch/arm/cpu/u-boot.lds | 9 +++++++-- arch/arm/lib/Makefile | 2 +- arch/arm/lib/sections.c | 1 + board/Barix/ipam390/u-boot-spl-ipam390.lds | 6 +++++- board/actux1/u-boot.lds | 9 +++++++-- board/actux2/u-boot.lds | 9 +++++++-- board/actux3/u-boot.lds | 9 +++++++-- board/ait/cam_enc_4xx/u-boot-spl.lds | 6 +++++- board/compulab/cm_t335/u-boot.lds | 9 +++++++-- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 6 +++++- board/davinci/da8xxevm/u-boot-spl-hawk.lds | 5 ++++- board/dvlhost/u-boot.lds | 9 +++++++-- board/freescale/mx31ads/u-boot.lds | 9 +++++++-- board/samsung/common/exynos-uboot-spl.lds | 6 +++++- board/ti/am335x/u-boot.lds | 9 +++++++-- board/vpac270/u-boot-spl.lds | 9 +++++++-- 26 files changed, 146 insertions(+), 38 deletions(-)
diff --git a/arch/arm/cpu/arm1136/u-boot-spl.lds b/arch/arm/cpu/arm1136/u-boot-spl.lds index bccde73..0299902 100644 --- a/arch/arm/cpu/arm1136/u-boot-spl.lds +++ b/arch/arm/cpu/arm1136/u-boot-spl.lds @@ -33,7 +33,11 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); __image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + }
.bss : { diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds index 4bed4fc..9699404 100644 --- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds +++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds @@ -50,5 +50,8 @@ SECTIONS .bss : { *(.bss*) } __bss_end = .;
- _end = .; + .end : + { + *(.__end) + } } diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds index 80fb9bd..d0b482d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds @@ -49,9 +49,14 @@ SECTIONS __bss_end = .; }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds index 76b499d..b6d0f65 100644 --- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds @@ -49,9 +49,14 @@ SECTIONS __bss_end = .; }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds index 9302856..b1c28c9 100644 --- a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds @@ -38,7 +38,11 @@ SECTIONS
. = ALIGN(4); __image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + } >.sram
.bss : { diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds index 5e93b34..9e8cd82 100644 --- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds @@ -34,7 +34,11 @@ SECTIONS
. = ALIGN(4); __image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + }
.bss : { diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds index a7c9c9d..4282beb 100644 --- a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds @@ -28,7 +28,11 @@ SECTIONS
. = ALIGN(4); __image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + }
.bss : { . = ALIGN(4); diff --git a/arch/arm/cpu/at91-common/u-boot-spl.lds b/arch/arm/cpu/at91-common/u-boot-spl.lds index 038335d..57ac1eb 100644 --- a/arch/arm/cpu/at91-common/u-boot-spl.lds +++ b/arch/arm/cpu/at91-common/u-boot-spl.lds @@ -37,7 +37,11 @@ SECTIONS
. = ALIGN(4); __image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + } >.sram
.bss : { diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds index 676ae2c..85f8d7a 100644 --- a/arch/arm/cpu/ixp/u-boot.lds +++ b/arch/arm/cpu/ixp/u-boot.lds @@ -58,7 +58,12 @@ SECTIONS *(.__rel_dyn_end) }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
/* * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c @@ -79,7 +84,7 @@ SECTIONS KEEP(*(.__bss_end)); }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds index 4880d0f..3e88668 100644 --- a/arch/arm/cpu/u-boot-spl.lds +++ b/arch/arm/cpu/u-boot-spl.lds @@ -42,7 +42,12 @@ SECTIONS __rel_dyn_end = .; }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
.bss __rel_dyn_start (OVERLAY) : { __bss_start = .; @@ -51,7 +56,7 @@ SECTIONS __bss_end = .; }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index 9463a33..4f084e7 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -60,7 +60,12 @@ SECTIONS *(.__rel_dyn_end) }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
/* * Deprecated: this MMU section is used by pxa at present but @@ -91,7 +96,7 @@ SECTIONS KEEP(*(.__bss_end)); }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .hash : { *(.hash) } .got.plt : { *(.got.plt) } .dynbss : { *(.dynbss) } diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 679f19a..f39d510 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -24,7 +24,6 @@ obj-y += relocate.o ifndef CONFIG_SYS_GENERIC_BOARD obj-y += board.o endif -obj-y += sections.o
obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o obj-$(CONFIG_CMD_BOOTM) += bootm.o @@ -35,6 +34,7 @@ else obj-$(CONFIG_SPL_FRAMEWORK) += spl.o endif
+obj-y += sections.o obj-y += interrupts.o obj-y += reset.o
diff --git a/arch/arm/lib/sections.c b/arch/arm/lib/sections.c index e35687c..5b30bcb 100644 --- a/arch/arm/lib/sections.c +++ b/arch/arm/lib/sections.c @@ -25,3 +25,4 @@ char __image_copy_start[0] __attribute__((section(".__image_copy_start"))); char __image_copy_end[0] __attribute__((section(".__image_copy_end"))); char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start"))); char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end"))); +char _end[0] __attribute__((section(".__end"))); diff --git a/board/Barix/ipam390/u-boot-spl-ipam390.lds b/board/Barix/ipam390/u-boot-spl-ipam390.lds index 5480d1f..8604696 100644 --- a/board/Barix/ipam390/u-boot-spl-ipam390.lds +++ b/board/Barix/ipam390/u-boot-spl-ipam390.lds @@ -49,5 +49,9 @@ SECTIONS } >.sram
__image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + } >.sram } diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds index 12e018f..0dfb0ea 100644 --- a/board/actux1/u-boot.lds +++ b/board/actux1/u-boot.lds @@ -66,7 +66,12 @@ SECTIONS *(.__rel_dyn_end) }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
/* * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c @@ -87,7 +92,7 @@ SECTIONS KEEP(*(.__bss_end)); }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds index 300273b..6fa3528 100644 --- a/board/actux2/u-boot.lds +++ b/board/actux2/u-boot.lds @@ -66,7 +66,12 @@ SECTIONS *(.__rel_dyn_end) }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
/* * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c @@ -87,7 +92,7 @@ SECTIONS KEEP(*(.__bss_end)); }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds index 9c97c53..d063386 100644 --- a/board/actux3/u-boot.lds +++ b/board/actux3/u-boot.lds @@ -66,7 +66,12 @@ SECTIONS *(.__rel_dyn_end) }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
/* * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c @@ -87,7 +92,7 @@ SECTIONS KEEP(*(.__bss_end)); }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds index fdfbfc3..c0d09ad 100644 --- a/board/ait/cam_enc_4xx/u-boot-spl.lds +++ b/board/ait/cam_enc_4xx/u-boot-spl.lds @@ -48,5 +48,9 @@ SECTIONS } >.sram
__image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + } } diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds index af4b88a..b3214c9 100644 --- a/board/compulab/cm_t335/u-boot.lds +++ b/board/compulab/cm_t335/u-boot.lds @@ -61,7 +61,12 @@ SECTIONS *(.__rel_dyn_end) }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
/* * Deprecated: this MMU section is used by pxa at present but @@ -92,7 +97,7 @@ SECTIONS KEEP(*(.__bss_end)); }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .hash : { *(.hash) } .got.plt : { *(.got.plt) } .dynbss : { *(.dynbss) } diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds index 5480d1f..de21a13 100644 --- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds +++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds @@ -49,5 +49,9 @@ SECTIONS } >.sram
__image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + } } diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds index e43130a..5401899 100644 --- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds +++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds @@ -61,5 +61,8 @@ SECTIONS __bss_end = .; }
- _end = .; + .end : + { + *(.__end) + } } diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds index 057d94b..6dc4cf4 100644 --- a/board/dvlhost/u-boot.lds +++ b/board/dvlhost/u-boot.lds @@ -66,7 +66,12 @@ SECTIONS *(.__rel_dyn_end) }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
/* * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c @@ -87,7 +92,7 @@ SECTIONS KEEP(*(.__bss_end)); }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 6cfca2d..f64c422 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -69,7 +69,12 @@ SECTIONS *(.__rel_dyn_end) }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
/* * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c @@ -90,7 +95,7 @@ SECTIONS KEEP(*(.__bss_end)); }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/board/samsung/common/exynos-uboot-spl.lds b/board/samsung/common/exynos-uboot-spl.lds index 8e3b73e..b22f9e0 100644 --- a/board/samsung/common/exynos-uboot-spl.lds +++ b/board/samsung/common/exynos-uboot-spl.lds @@ -42,7 +42,11 @@ SECTIONS . = ALIGN(4);
__image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + } >.sram
.bss : { diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds index 9f96a43..0ff1e6a 100644 --- a/board/ti/am335x/u-boot.lds +++ b/board/ti/am335x/u-boot.lds @@ -77,7 +77,12 @@ SECTIONS *(.__rel_dyn_end) }
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
/* * Deprecated: this MMU section is used by pxa at present but @@ -108,7 +113,7 @@ SECTIONS KEEP(*(.__bss_end)); }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds index 08c78b3..2445cbb 100644 --- a/board/vpac270/u-boot-spl.lds +++ b/board/vpac270/u-boot-spl.lds @@ -53,7 +53,12 @@ SECTIONS
. = ALIGN(0x800);
- _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .;
.bss __rel_dyn_start (OVERLAY) : { __bss_start = .; @@ -62,7 +67,7 @@ SECTIONS __bss_end = .; }
- .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) }
Remove the last uses of symbol offsets in ARM U-Boot. Remove some needless uses of _TEXT_BASE. Remove all _TEXT_BASE definitions.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net --- Changes in v3: None Changes in v2: - fixed use of _rel_dyn_end instead of _end
README | 6 ------ arch/arm/cpu/arm1136/start.S | 27 --------------------------- arch/arm/cpu/arm1176/start.S | 27 --------------------------- arch/arm/cpu/arm720t/start.S | 26 -------------------------- arch/arm/cpu/arm920t/start.S | 26 -------------------------- arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 14 +------------- arch/arm/cpu/arm926ejs/mxs/start.S | 27 --------------------------- arch/arm/cpu/arm926ejs/start.S | 27 --------------------------- arch/arm/cpu/arm946es/start.S | 26 -------------------------- arch/arm/cpu/arm_intcm/start.S | 26 -------------------------- arch/arm/cpu/armv7/omap3/lowlevel_init.S | 3 --- arch/arm/cpu/armv7/start.S | 23 ----------------------- arch/arm/cpu/ixp/start.S | 26 -------------------------- arch/arm/cpu/pxa/start.S | 27 --------------------------- arch/arm/cpu/sa1100/start.S | 26 -------------------------- arch/arm/lib/board.c | 12 ++++++------ board/armltd/integrator/lowlevel_init.S | 2 +- board/cm4008/flash.c | 2 +- board/cm41xx/flash.c | 2 +- board/mpl/vcma9/lowlevel_init.S | 5 +---- board/mx1ads/lowlevel_init.S | 4 ---- board/samsung/goni/lowlevel_init.S | 3 --- board/samsung/smdk2410/lowlevel_init.S | 5 +---- board/samsung/smdk5250/lowlevel_init.S | 5 +---- board/samsung/smdkc100/lowlevel_init.S | 3 --- board/ti/omap5912osk/lowlevel_init.S | 4 ---- common/board_f.c | 14 +++----------- common/board_r.c | 4 ++-- include/asm-generic/sections.h | 26 +++++++------------------- 29 files changed, 25 insertions(+), 403 deletions(-)
diff --git a/README b/README index f0ffaf4..d39b484 100644 --- a/README +++ b/README @@ -3585,12 +3585,6 @@ Configuration Settings: its config.mk file). If you find problems enabling this option on your board please report the problem and send patches!
-- CONFIG_SYS_SYM_OFFSETS - This is set by architectures that use offsets for link symbols - instead of absolute values. So bss_start is obtained using an - offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than - directly. You should not need to touch this setting. - - CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) This is set by OMAP boards for the max time that reset should be asserted. See doc/README.omap-reset-time for details on how diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 00d1b30..3e2358e 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -70,32 +70,6 @@ _end_vect: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START @@ -295,7 +269,6 @@ cpu_init_crit: #ifdef CONFIG_SPL_BUILD .align 5 do_hang: - ldr sp, _TEXT_BASE /* use 32 words about stack */ bl hang /* hang and never return */ #else /* !CONFIG_SPL_BUILD */ .align 5 diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index ffd7dd0..ce62011 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -77,33 +77,6 @@ _end_vect: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ - -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index f180eb8..1a34842 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -67,32 +67,6 @@ _pad: .word 0x12345678 /* now 16*4=64 */ ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index a67b659..7bf094a 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -55,32 +55,6 @@ _fiq: .word fiq ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S index e83968f..a9ec81a 100644 --- a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S +++ b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S @@ -26,27 +26,18 @@ #define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL #endif
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init .type lowlevel_init,function lowlevel_init:
- mov r5, pc /* r5 = POS1 + 4 current */ POS1: + adr r5, POS1 /* r5 = POS1 run time */ ldr r0, =POS1 /* r0 = POS1 compile */ - ldr r2, _TEXT_BASE - sub r0, r0, r2 /* r0 = POS1-_TEXT_BASE (POS1 relative) */ sub r5, r5, r0 /* r0 = CONFIG_SYS_TEXT_BASE-1 */ - sub r5, r5, #4 /* r1 = text base - current */
/* memory control configuration 1 */ ldr r0, =SMRDATA ldr r2, =SMRDATA1 - ldr r1, _TEXT_BASE - sub r0, r0, r1 - sub r2, r2, r1 add r0, r0, r5 add r2, r2, r5 0: @@ -149,9 +140,6 @@ PLL_setup_end:
ldr r0, =SMRDATA1 ldr r2, =SMRDATA2 - ldr r1, _TEXT_BASE - sub r0, r0, r1 - sub r2, r2, r1 add r0, r0, r5 add r2, r2, r5 2: diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index 5de2bad..34a0fcb 100644 --- a/arch/arm/cpu/arm926ejs/mxs/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -101,32 +101,6 @@ fiq: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#ifdef CONFIG_SPL_TEXT_BASE - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START @@ -207,6 +181,5 @@ _reset: bx lr
_hang: - ldr sp, _TEXT_BASE /* switch to abort stack */ 1: bl 1b /* hang and never return */ diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 5360f55..0717327 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -102,32 +102,6 @@ _fiq: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START @@ -330,7 +304,6 @@ flush_dcache: #ifdef CONFIG_SPL_BUILD .align 5 do_hang: - ldr sp, _TEXT_BASE /* switch to abort stack */ 1: bl 1b /* hang and never return */ #else /* !CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index e16b088..7d50145 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -71,32 +71,6 @@ _vectors_end: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 5783df1..7404ea7 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -67,32 +67,6 @@ _fiq: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 6f7261b..78577b1 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -17,9 +17,6 @@ #include <asm/arch/clocks_omap3.h> #include <linux/linkage.h>
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - #ifdef CONFIG_SPL_BUILD ENTRY(save_boot_params) ldr r4, =omap3_boot_device diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 6c9b11a..4ff6268 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -63,29 +63,6 @@ _end_vect: * *************************************************************************/
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 82c868a..80ef443 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -80,32 +80,6 @@ _fiq: .word fiq * - jump to second stage */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index d8fb812..ae0d13c 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -84,32 +84,6 @@ _end_vect: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START @@ -316,7 +290,6 @@ cpu_init_crit: #ifdef CONFIG_SPL_BUILD .align 5 do_hang: - ldr sp, _TEXT_BASE /* use 32 words about stack */ bl hang /* hang and never return */ #else /* !CONFIG_SPL_BUILD */ .align 5 diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 27bcda5..bf80937 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -56,32 +56,6 @@ _fiq: .word fiq ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 34f50b0..f8ac573 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -105,8 +105,8 @@ static int display_banner(void) { printf("\n\n%s\n\n", version_string); debug("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n", - _TEXT_BASE, - _bss_start_ofs + _TEXT_BASE, _bss_end_ofs + _TEXT_BASE); + (ulong)&_start, + (ulong)&__bss_start, (ulong)&__bss_end); #ifdef CONFIG_MODEM_SUPPORT debug("Modem Support enabled\n"); #endif @@ -277,13 +277,13 @@ void board_init_f(ulong bootflag)
memset((void *)gd, 0, sizeof(gd_t));
- gd->mon_len = _bss_end_ofs; + gd->mon_len = (ulong)&__bss_end - (ulong)_start; #ifdef CONFIG_OF_EMBED /* Get a pointer to the FDT */ gd->fdt_blob = _binary_dt_dtb_start; #elif defined CONFIG_OF_SEPARATE /* FDT is at end of image */ - gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE); + gd->fdt_blob = &_end; #endif /* Allow the early environment to override the fdt address */ gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, @@ -451,7 +451,7 @@ void board_init_f(ulong bootflag)
gd->relocaddr = addr; gd->start_addr_sp = addr_sp; - gd->reloc_off = addr - _TEXT_BASE; + gd->reloc_off = addr - (ulong)&_start; debug("relocation Offset is: %08lx\n", gd->reloc_off); if (new_fdt) { memcpy(new_fdt, gd->fdt_blob, fdt_size); @@ -516,7 +516,7 @@ void board_init_r(gd_t *id, ulong dest_addr) gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
- monitor_flash_len = _end_ofs; + monitor_flash_len = (ulong)&__rel_dyn_end - (ulong)_start;
/* Enable caches */ enable_caches(); diff --git a/board/armltd/integrator/lowlevel_init.S b/board/armltd/integrator/lowlevel_init.S index 389d5e9..0fb42ad 100644 --- a/board/armltd/integrator/lowlevel_init.S +++ b/board/armltd/integrator/lowlevel_init.S @@ -183,7 +183,7 @@ cm_remap:
/* Now 0x00000000 is writeable, replace the vectors */ ldr r0, =_start /* r0 <- start of vectors */ - ldr r2, =_TEXT_BASE /* r2 <- past vectors */ + add r2, r0, #64 /* r2 <- past vectors */ sub r1,r1,r1 /* destination 0x00000000 */
copy_vec: diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c index 2511928..8315a57 100644 --- a/board/cm4008/flash.c +++ b/board/cm4008/flash.c @@ -57,7 +57,7 @@ unsigned long flash_init (void) */ flash_protect (FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + _bss_start_ofs, + CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start), &flash_info[0]);
return size; diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c index 2511928..8315a57 100644 --- a/board/cm41xx/flash.c +++ b/board/cm41xx/flash.c @@ -57,7 +57,7 @@ unsigned long flash_init (void) */ flash_protect (FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + _bss_start_ofs, + CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start), &flash_info[0]);
return size; diff --git a/board/mpl/vcma9/lowlevel_init.S b/board/mpl/vcma9/lowlevel_init.S index b889cf9..cca9c0c 100644 --- a/board/mpl/vcma9/lowlevel_init.S +++ b/board/mpl/vcma9/lowlevel_init.S @@ -197,13 +197,10 @@ #define REFCNT_266 0 /**************************************/
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: /* use r0 to relocate DATA read/write to flash rather than memory ! */ - ldr r0, _TEXT_BASE + ldr r0, =CONFIG_SYS_TEXT_BASE ldr r13, =BWSCON
/* enable minimal access to PLD */ diff --git a/board/mx1ads/lowlevel_init.S b/board/mx1ads/lowlevel_init.S index d1e472a..3e713cc 100644 --- a/board/mx1ads/lowlevel_init.S +++ b/board/mx1ads/lowlevel_init.S @@ -16,10 +16,6 @@ #define SDCTL0 0x221000 #define SDCTL1 0x221004
- -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: /* memory controller init */ diff --git a/board/samsung/goni/lowlevel_init.S b/board/samsung/goni/lowlevel_init.S index 726211a..d52bc09 100644 --- a/board/samsung/goni/lowlevel_init.S +++ b/board/samsung/goni/lowlevel_init.S @@ -22,9 +22,6 @@ * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on */
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: mov r11, lr diff --git a/board/samsung/smdk2410/lowlevel_init.S b/board/samsung/smdk2410/lowlevel_init.S index c7b78fd..5de04f1 100644 --- a/board/samsung/smdk2410/lowlevel_init.S +++ b/board/samsung/smdk2410/lowlevel_init.S @@ -110,16 +110,13 @@ #define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ /**************************************/
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: /* memory control configuration */ /* make r0 relative the current location so that it */ /* reads SMRDATA out of FLASH rather than memory ! */ ldr r0, =SMRDATA - ldr r1, _TEXT_BASE + ldr r1, =CONFIG_SYS_TEXT_BASE sub r0, r0, r1 ldr r1, =BWSCON /* Bus Width Status Controller */ add r2, r0, #13*4 diff --git a/board/samsung/smdk5250/lowlevel_init.S b/board/samsung/smdk5250/lowlevel_init.S index 9003e2d..8e389cc 100644 --- a/board/samsung/smdk5250/lowlevel_init.S +++ b/board/samsung/smdk5250/lowlevel_init.S @@ -10,9 +10,6 @@ #include <version.h> #include <asm/arch/cpu.h>
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init:
@@ -47,7 +44,7 @@ lowlevel_init: ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ bic r1, pc, r0 /* pc <- current addr of code */ /* r1 <- unmasked bits of pc */ - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ + ldr r2, =CONFIG_SYS_TEXT_BASE /* r2 <- original base addr in ram */ bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ cmp r1, r2 /* compare r1, r2 */ beq 1f /* r0 == r1 then skip sdram init */ diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S index 4df0974..65e6b7a 100644 --- a/board/samsung/smdkc100/lowlevel_init.S +++ b/board/samsung/smdkc100/lowlevel_init.S @@ -17,9 +17,6 @@ * r5 has zero always */
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: mov r9, lr diff --git a/board/ti/omap5912osk/lowlevel_init.S b/board/ti/omap5912osk/lowlevel_init.S index cad0a5a..e05a1c7 100644 --- a/board/ti/omap5912osk/lowlevel_init.S +++ b/board/ti/omap5912osk/lowlevel_init.S @@ -18,10 +18,6 @@ #include <./configs/omap1510.h> #endif
- -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - .globl lowlevel_init lowlevel_init:
diff --git a/common/board_f.c b/common/board_f.c index f0664bc..15f8b79 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -149,13 +149,9 @@ static int display_text_info(void) #ifndef CONFIG_SANDBOX ulong bss_start, bss_end;
-#ifdef CONFIG_SYS_SYM_OFFSETS - bss_start = _bss_start_ofs + _TEXT_BASE; - bss_end = _bss_end_ofs + _TEXT_BASE; -#else bss_start = (ulong)&__bss_start; bss_end = (ulong)&__bss_end; -#endif + debug("U-Boot code: %08X -> %08lX BSS: -> %08lX\n", CONFIG_SYS_TEXT_BASE, bss_start, bss_end); #endif @@ -279,8 +275,8 @@ static int zero_global_data(void)
static int setup_mon_len(void) { -#ifdef CONFIG_SYS_SYM_OFFSETS - gd->mon_len = _bss_end_ofs; +#ifdef __ARM__ + gd->mon_len = (ulong)&__bss_end - (ulong)_start; #elif defined(CONFIG_SANDBOX) gd->mon_len = (ulong)&_end - (ulong)_init; #else @@ -362,11 +358,7 @@ static int setup_fdt(void) gd->fdt_blob = _binary_dt_dtb_start; #elif defined CONFIG_OF_SEPARATE /* FDT is at end of image */ -# ifdef CONFIG_SYS_SYM_OFFSETS - gd->fdt_blob = (void *)(_end_ofs + CONFIG_SYS_TEXT_BASE); -# else gd->fdt_blob = (ulong *)&_end; -# endif #elif defined(CONFIG_OF_HOSTFILE) if (read_fdt_from_file()) { puts("Failed to read control FDT\n"); diff --git a/common/board_r.c b/common/board_r.c index 86ca1cb..9d84d14 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -128,8 +128,8 @@ __weak int fixup_cpu(void)
static int initr_reloc_global_data(void) { -#ifdef CONFIG_SYS_SYM_OFFSETS - monitor_flash_len = _end_ofs; +#ifdef __ARM__ + monitor_flash_len = _end - __image_copy_start; #elif !defined(CONFIG_SANDBOX) monitor_flash_len = (ulong)&__init_end - gd->relocaddr; #endif diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h index 7e1eb4b..458952f 100644 --- a/include/asm-generic/sections.h +++ b/include/asm-generic/sections.h @@ -63,28 +63,16 @@ extern char __image_copy_end[]; extern void _start(void);
/* - * ARM needs to use offsets for symbols, since the values of some symbols - * are not resolved prior to relocation (and are just 0). Maybe this can be - * resolved, or maybe other architectures are similar, iwc this should be - * promoted to an architecture option. + * ARM defines its symbols as char[]. Other arches define them as ulongs. */ #ifdef CONFIG_ARM -#define CONFIG_SYS_SYM_OFFSETS -#endif - -#ifdef CONFIG_SYS_SYM_OFFSETS -/* Start/end of the relocation entries, as an offset from _start */ -extern ulong _rel_dyn_start_ofs; -extern ulong _rel_dyn_end_ofs; - -/* End of the region to be relocated, as an offset form _start */ -extern ulong _image_copy_end_ofs;
-extern ulong _bss_start_ofs; /* BSS start relative to _start */ -extern ulong _bss_end_ofs; /* BSS end relative to _start */ -extern ulong _end_ofs; /* end of image relative to _start */ - -extern ulong _TEXT_BASE; /* code start */ +extern char __bss_start[]; +extern char __bss_end[]; +extern char __image_copy_start[]; +extern char __image_copy_end[]; +extern char __rel_dyn_start[]; +extern char __rel_dyn_end[];
#else /* don't use offsets: */
(adding Minkyu as the Samsung custodian)
On Mon, 9 Dec 2013 18:09:18 +0100, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
mkexynos reads its input file which might be smaller than
( typo: s/mkexynos/mkexynosspl/ -- wil fix when applying if thee is no other change to be made )
its read buffer, but always writes the whole buffer out. This does not affect the functionalyty of the output file, but it makes its content unpredictable as the end of the buffer is never initialized. Fix this by zeroing the buffer before reading the input file.
Minkyu: should the buffer be pre-filled with zeroes or should I use ones instead? Or maybe the output could be truncated to the size of the input?
Amicalement, Albert.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net
Changes in v3:
- fixed mkexynosspl uninitialized buffer
Changes in v2: None
tools/mkexynosspl.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/tools/mkexynosspl.c b/tools/mkexynosspl.c index ef685b7..8d605fa 100644 --- a/tools/mkexynosspl.c +++ b/tools/mkexynosspl.c @@ -72,6 +72,8 @@ int main(int argc, char **argv)
count = (len < CHECKSUM_OFFSET) ? len : CHECKSUM_OFFSET;
- memset(buffer, 0, BUFSIZE);
- if (read(ifd, buffer, count) != count) { fprintf(stderr, "%s: Can't read %s: %s\n", argv[0], argv[1], strerror(errno));
Dear Albert,
On 13/12/13 18:00, Albert ARIBAUD wrote:
(adding Minkyu as the Samsung custodian)
On Mon, 9 Dec 2013 18:09:18 +0100, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
mkexynos reads its input file which might be smaller than
( typo: s/mkexynos/mkexynosspl/ -- wil fix when applying if thee is no other change to be made )
its read buffer, but always writes the whole buffer out. This does not affect the functionalyty of the output file, but it makes its content unpredictable as the end of the buffer is never initialized. Fix this by zeroing the buffer before reading the input file.
Minkyu: should the buffer be pre-filled with zeroes or should I use ones instead? Or maybe the output could be truncated to the size of the input?
Basically, the output file is fixed to 14K as same as buffer size. And the input file should be smaller than 14K. It's the rule of exynos spl. The role of mkexynosspl is just adding 4 byte checksum value to end of file. If the input file is bigger than 14K, output will be truncated.
Amicalement, Albert.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net
btw, this change looks reasonable to me.
Acked-by: Minkyu Kang mk7.kang@samsung.com
Changes in v3:
- fixed mkexynosspl uninitialized buffer
Changes in v2: None
tools/mkexynosspl.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/tools/mkexynosspl.c b/tools/mkexynosspl.c index ef685b7..8d605fa 100644 --- a/tools/mkexynosspl.c +++ b/tools/mkexynosspl.c @@ -72,6 +72,8 @@ int main(int argc, char **argv)
count = (len < CHECKSUM_OFFSET) ? len : CHECKSUM_OFFSET;
- memset(buffer, 0, BUFSIZE);
- if (read(ifd, buffer, count) != count) { fprintf(stderr, "%s: Can't read %s: %s\n", argv[0], argv[1], strerror(errno));
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Thanks, Minkyu Kang.
Hi Minkyu,
On Sat, 14 Dec 2013 14:07:57 +0900, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
On 13/12/13 18:00, Albert ARIBAUD wrote:
(adding Minkyu as the Samsung custodian)
On Mon, 9 Dec 2013 18:09:18 +0100, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
mkexynos reads its input file which might be smaller than
( typo: s/mkexynos/mkexynosspl/ -- wil fix when applying if thee is no other change to be made )
its read buffer, but always writes the whole buffer out. This does not affect the functionalyty of the output file,
... and s/functionalyty/functionality/, too.
but it makes its content unpredictable as the end of the buffer is never initialized. Fix this by zeroing the buffer before reading the input file.
Minkyu: should the buffer be pre-filled with zeroes or should I use ones instead? Or maybe the output could be truncated to the size of the input?
Basically, the output file is fixed to 14K as same as buffer size. And the input file should be smaller than 14K. It's the rule of exynos spl. The role of mkexynosspl is just adding 4 byte checksum value to end of file. If the input file is bigger than 14K, output will be truncated.
Amicalement, Albert.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net
btw, this change looks reasonable to me.
Acked-by: Minkyu Kang mk7.kang@samsung.com
Thanks! If that's ok with you, I'll apply 1/4 to ARM, considering it a kind of bugfix, and remove it from V4 of the patch series if there is any.
Or if you prefer to apply 1/4 to u-boot-samsung, that's fine with me.
Thanks, Minkyu Kang.
Amicalement,
Dear Albert ARIBAUD,
On 14/12/13 19:14, Albert ARIBAUD wrote:
Hi Minkyu,
On Sat, 14 Dec 2013 14:07:57 +0900, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
On 13/12/13 18:00, Albert ARIBAUD wrote:
(adding Minkyu as the Samsung custodian)
On Mon, 9 Dec 2013 18:09:18 +0100, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
mkexynos reads its input file which might be smaller than
( typo: s/mkexynos/mkexynosspl/ -- wil fix when applying if thee is no other change to be made )
its read buffer, but always writes the whole buffer out. This does not affect the functionalyty of the output file,
... and s/functionalyty/functionality/, too.
but it makes its content unpredictable as the end of the buffer is never initialized. Fix this by zeroing the buffer before reading the input file.
Minkyu: should the buffer be pre-filled with zeroes or should I use ones instead? Or maybe the output could be truncated to the size of the input?
Basically, the output file is fixed to 14K as same as buffer size. And the input file should be smaller than 14K. It's the rule of exynos spl. The role of mkexynosspl is just adding 4 byte checksum value to end of file. If the input file is bigger than 14K, output will be truncated.
Amicalement, Albert.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net
btw, this change looks reasonable to me.
Acked-by: Minkyu Kang mk7.kang@samsung.com
Thanks! If that's ok with you, I'll apply 1/4 to ARM, considering it a kind of bugfix, and remove it from V4 of the patch series if there is any.
Or if you prefer to apply 1/4 to u-boot-samsung, that's fine with me.
please apply this patch to u-boot-arm.
Thanks, Minkyu Kang.
Amicalement,
Thanks, Minkyu Kang.
Hi Albert,
Please refer the following patch:
"SPL: EXYNOS: Prepare for variable size SPL support"
http://patchwork.ozlabs.org/patch/298965/
I don't think after this patch is applied, the above patch would be required.
Regards, Rajeshwari.
On Mon, Dec 16, 2013 at 6:18 AM, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert ARIBAUD,
On 14/12/13 19:14, Albert ARIBAUD wrote:
Hi Minkyu,
On Sat, 14 Dec 2013 14:07:57 +0900, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
On 13/12/13 18:00, Albert ARIBAUD wrote:
(adding Minkyu as the Samsung custodian)
On Mon, 9 Dec 2013 18:09:18 +0100, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
mkexynos reads its input file which might be smaller than
( typo: s/mkexynos/mkexynosspl/ -- wil fix when applying if thee is no other change to be made )
its read buffer, but always writes the whole buffer out. This does not affect the functionalyty of the output file,
... and s/functionalyty/functionality/, too.
but it makes its content unpredictable as the end of the buffer is never initialized. Fix this by zeroing the buffer before reading the input file.
Minkyu: should the buffer be pre-filled with zeroes or should I use ones instead? Or maybe the output could be truncated to the size of the input?
Basically, the output file is fixed to 14K as same as buffer size. And the input file should be smaller than 14K. It's the rule of exynos spl. The role of mkexynosspl is just adding 4 byte checksum value to end of file. If the input file is bigger than 14K, output will be truncated.
Amicalement, Albert.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net
btw, this change looks reasonable to me.
Acked-by: Minkyu Kang mk7.kang@samsung.com
Thanks! If that's ok with you, I'll apply 1/4 to ARM, considering it a kind of bugfix, and remove it from V4 of the patch series if there is any.
Or if you prefer to apply 1/4 to u-boot-samsung, that's fine with me.
please apply this patch to u-boot-arm.
Thanks, Minkyu Kang.
Amicalement,
Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Hi Rajeshwari,
On Mon, 16 Dec 2013 13:12:30 +0530, Rajeshwari Birje rajeshwari.birje@gmail.com wrote:
Hi Albert,
Please refer the following patch:
"SPL: EXYNOS: Prepare for variable size SPL support"
http://patchwork.ozlabs.org/patch/298965/
I don't think after this patch is applied, the above patch would be required.
Thanks for pointing this out.
Minkyu, have you planned a PR to me with this patch already?
Regards, Rajeshwari.
Amicalement,
On 21/12/13 18:44, Albert ARIBAUD wrote:
Hi Rajeshwari,
On Mon, 16 Dec 2013 13:12:30 +0530, Rajeshwari Birje rajeshwari.birje@gmail.com wrote:
Hi Albert,
Please refer the following patch:
"SPL: EXYNOS: Prepare for variable size SPL support"
http://patchwork.ozlabs.org/patch/298965/
I don't think after this patch is applied, the above patch would be required.
Thanks for pointing this out.
Minkyu, have you planned a PR to me with this patch already?
Maybe next weekend?
From tomorrow I'm going to go the winter vacation.
Regards, Rajeshwari.
Amicalement,
Thanks, Minkyu Kang.
participants (3)
-
Albert ARIBAUD -
Minkyu Kang -
Rajeshwari Birje