MicroZed is a low-cost development board based on the Xilinx Zynq-7000 All Programmable SoC.

APSOC: - XC7Z010-1CLG400C Memory: - 1 GB of DDR3 SDRAM - 128Mb of QSPI flash(S25FL128SAGBHI200) - Micro SD card interface Communication: - 10/100/1000 Ethernet - USB 2.0 - USB-UART User I/O: - 100 User I/O (50 per connector) - Configurable as up to 48 LVDS pairs or 100 single-ended I/O Misc: - Xilinx PC4 JTAG configuration port - PS JTAG pins accessible via Pmod - 33.33 MHz oscillator - User LED and push switch

For more info - http://zedboard.org/product/microzed

Signed-off-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com --- V3: Removed CONFIG_SPI_ZYNQ V2: none

boards.cfg | 1 + include/configs/zynq_microzed.h | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+) create mode 100644 include/configs/zynq_microzed.h

diff --git a/boards.cfg b/boards.cfg index ddb5fa9..9928975 100644 --- a/boards.cfg +++ b/boards.cfg @@ -356,6 +356,7 @@ Active arm armv7 u8500 st-ericsson u8500 Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang b18965@freescale.com Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek monstr@monstr.eu:Jagannadha Sutradharudu Teki jaganna@xilinx.com Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek monstr@monstr.eu:Jagannadha Sutradharudu Teki jaganna@xilinx.com +Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek monstr@monstr.eu:Jagannadha Sutradharudu Teki jaganna@xilinx.com Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren twarren@nvidia.com Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding thierry.reding@avionic-design.de Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Thierry Reding thierry.reding@avionic-design.de diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h new file mode 100644 index 0000000..549a664 --- /dev/null +++ b/include/configs/zynq_microzed.h @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2013 Xilinx, Inc. + * + * Configuration for Micro Zynq Evaluation and Development Board - MicroZedBoard + * See zynq-common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_MICROZED_H +#define __CONFIG_ZYNQ_MICROZED_H + +#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) + +#define CONFIG_ZYNQ_SERIAL_UART1 +#define CONFIG_ZYNQ_GEM0 +#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ZYNQ_SDHCI0 + +#include <configs/zynq-common.h> + +#endif /* __CONFIG_ZYNQ_MICROZED_H */