The first stage of flash.bin is larger than 584 * 512, so when writting u-boot.itb, some data will be override. Enlarge the CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to fix boot.

Signed-off-by: Peng Fan peng.fan@nxp.com --- board/freescale/imx8qxp_mek/README | 2 +- include/configs/imx8qxp_mek.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README index f32290e3a2..9f2e2f7b12 100644 --- a/board/freescale/imx8qxp_mek/README +++ b/board/freescale/imx8qxp_mek/README @@ -43,7 +43,7 @@ $ export ATF_LOAD_ADDR=0x80000000 $ export BL33_LOAD_ADDR=0x80020000 $ make imx8qxp_mek_defconfig $ make flash.bin -$ dd if=u-boot.itb of=flash.bin bs=512 seek=528 +$ dd if=u-boot.itb of=flash.bin bs=512 seek=1984

Flash the binary into the SD card ================================= diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index c1f193487e..e230f6dd19 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -13,7 +13,7 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x250 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0

#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"