[U-Boot-Users] [GIT PULL] add support for sbc8349, MPC832XEMDS, MPC8349EA, MPC8360EA, and various bugfixes
Wolfgang,
please pull:
http://opensource.freescale.com/pub/scm/u-boot-83xx.git upstream
to get the following commits.
Thanks, Kim
Dave Liu (5): mpc83xx: Fix the UEC driver bug of QE mpc83xx: streamline the 83xx immr head file mpc83xx: Add support for the MPC832XEMDS board mpc83xx: Add the MPC832XEMDS board readme mpc83xx: Fix the LAW1/3 bug
Emilian Medve (1): mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
Jerry Van Baren (1): mpc83xx: Put the version (and magic) after the HRCW.
Joakim Tjernlund (1): mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
Kim Phillips (9): mpc83xx: sort Makefile targets mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL mpc83xx: make 8360 default environment fdt be 8360 (not 8349) mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt mpc83xx: don't hang if watchdog configured on 8360, 832x mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers mpc83xx: add command line editing by default mpc83xx: update [local-]mac-address properties on UEC based devices mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
Kumar Gala (2): mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
Paul Gortmaker (1): mpc83xx: U-Boot support for Wind River SBC8349
Sam Song (1): mpc83xx: Remove a redundant semicolon in mpc8349itx.c
Timur Tabi (3): mpc83xx: Delete sdram_init() for MPC8349E-mITX mpc83xx: Add support for the MPC8349E-mITX-GP mpc83xx: write MAC address to mac-address and local-mac-address
Xie Xiaobo (3): mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
CREDITS | 4 + MAINTAINERS | 1 + MAKEALL | 3 +- Makefile | 47 +- board/mpc832xemds/Makefile | 50 + board/mpc832xemds/config.mk | 28 + board/mpc832xemds/mpc832xemds.c | 176 ++++ board/mpc832xemds/pci.c | 316 +++++++ board/mpc832xemds/u-boot.lds | 123 +++ board/mpc8349emds/mpc8349emds.c | 17 +- board/mpc8349itx/config.mk | 6 +- board/mpc8349itx/mpc8349itx.c | 112 +-- board/mpc8360emds/mpc8360emds.c | 24 +- board/mpc8360emds/pci.c | 3 + board/sbc8349/Makefile | 49 + board/sbc8349/config.mk | 27 + board/sbc8349/pci.c | 348 +++++++ board/sbc8349/sbc8349.c | 585 ++++++++++++ board/sbc8349/u-boot.lds | 125 +++ board/tqm834x/tqm834x.c | 4 +- cpu/mpc83xx/cpu.c | 91 ++- cpu/mpc83xx/cpu_init.c | 47 +- cpu/mpc83xx/qe_io.c | 2 +- cpu/mpc83xx/spd_sdram.c | 388 +++++++-- cpu/mpc83xx/speed.c | 61 +- cpu/mpc83xx/start.S | 28 +- doc/README.mpc832xemds | 129 +++ doc/README.mpc8349itx | 187 ++++ doc/README.sbc8349 | 99 ++ drivers/fsl_i2c.c | 27 +- drivers/qe/qe.h | 2 +- drivers/qe/uec.c | 27 +- drivers/tsec.c | 84 ++ drivers/tsec.h | 5 + include/asm-ppc/e300.h | 5 + include/asm-ppc/global_data.h | 4 +- include/asm-ppc/immap_83xx.h | 1958 ++++++--------------------------------- include/asm-ppc/immap_qe.h | 6 + include/configs/MPC832XEMDS.h | 631 +++++++++++++ include/configs/MPC8349EMDS.h | 56 +- include/configs/MPC8349ITX.h | 459 ++++------ include/configs/MPC8360EMDS.h | 43 +- include/configs/TQM834x.h | 11 - include/configs/sbc8349.h | 734 +++++++++++++++ include/mpc83xx.h | 1325 +++++++++++++++++++-------- 45 files changed, 5838 insertions(+), 2619 deletions(-) create mode 100644 board/mpc832xemds/Makefile create mode 100644 board/mpc832xemds/config.mk create mode 100644 board/mpc832xemds/mpc832xemds.c create mode 100644 board/mpc832xemds/pci.c create mode 100644 board/mpc832xemds/u-boot.lds create mode 100644 board/sbc8349/Makefile create mode 100644 board/sbc8349/config.mk create mode 100644 board/sbc8349/pci.c create mode 100644 board/sbc8349/sbc8349.c create mode 100644 board/sbc8349/u-boot.lds create mode 100644 doc/README.mpc832xemds create mode 100644 doc/README.mpc8349itx create mode 100644 doc/README.sbc8349 create mode 100644 include/configs/MPC832XEMDS.h create mode 100644 include/configs/sbc8349.h
Dear Kim,
in message 20070302163414.3eb21830.kim.phillips@freescale.com you wrote:
please pull:
http://opensource.freescale.com/pub/scm/u-boot-83xx.git upstream
to get the following commits.
Can you please try to push into your repo on our server? I know that you have to do this from your home machine, and that I promised to set up automatic syncronisation, but we need your help to test the basic mechanism first.
Best regards,
Wolfgang Denk
On Sat, 03 Mar 2007 01:17:28 +0100 Wolfgang Denk wd@denx.de wrote:
Dear Kim,
in message 20070302163414.3eb21830.kim.phillips@freescale.com you wrote:
please pull:
http://opensource.freescale.com/pub/scm/u-boot-83xx.git upstream
to get the following commits.
Can you please try to push into your repo on our server? I know that you have to do this from your home machine, and that I promised to set up automatic syncronisation, but we need your help to test the basic mechanism first.
I tried and failed - I sent you another email on the subject.
I will push to your server once the access issues are resolved.
Kim
On Fri, 2 Mar 2007 18:57:17 -0600 Kim Phillips kim.phillips@freescale.com wrote:
On Sat, 03 Mar 2007 01:17:28 +0100 Wolfgang Denk wd@denx.de wrote:
Dear Kim,
in message 20070302163414.3eb21830.kim.phillips@freescale.com you wrote:
please pull:
http://opensource.freescale.com/pub/scm/u-boot-83xx.git upstream
to get the following commits.
Can you please try to push into your repo on our server?
Wolfgang,
I was going to ask you to pull from the mpc83xx tree on your server (I updated it), however, I seem to be having trouble doing so myself:
$ git pull http://www.denx.de/git/u-boot-mpc83xx.git Cannot get the repository state from http://www.denx.de/git/u-boot-mpc83xx.git $
I'm wondering whether the path has changed, or whether a
chmod +x u-boot-83xx.git/hooks/post-update
is in order?
Kim
In message 20070308145454.6a60322b.kim.phillips@freescale.com you wrote:
I was going to ask you to pull from the mpc83xx tree on your server (I updated it), however, I seem to be having trouble doing so myself:
$ git pull http://www.denx.de/git/u-boot-mpc83xx.git Cannot get the repository state from http://www.denx.de/git/u-boot-mpc83xx.git
I'm wondering whether the path has changed, or whether a
That's probably a problem on our side; we changed the gitweb format to show the custodian trees as "forks"; see http://www.denx.de/cgi-bin/gitweb.cgi and click at the "+" in front of the u-boot.git entry...
This must have broken HTTP access; we'll try to fix this ASAP.
In the meantime, please use git protocol, i. e. try
$ git pull git://www.denx.de/git/u-boot-mpc83xx.git
Best regards,
Wolfgang Denk
In message 20070308145454.6a60322b.kim.phillips@freescale.com you wrote:
I was going to ask you to pull from the mpc83xx tree on your server (I updated it), however, I seem to be having trouble doing so myself:
$ git pull http://www.denx.de/git/u-boot-mpc83xx.git Cannot get the repository state from http://www.denx.de/git/u-boot-mpc83xx.git $
Should be working now. Please try again.
Thanks for the hint!
Best regards,
Wolfgang Denk
On Thu, 08 Mar 2007 22:30:27 +0100 Wolfgang Denk wd@denx.de wrote:
In message 20070308145454.6a60322b.kim.phillips@freescale.com you wrote:
I was going to ask you to pull from the mpc83xx tree on your server (I updated it), however, I seem to be having trouble doing so myself:
$ git pull http://www.denx.de/git/u-boot-mpc83xx.git Cannot get the repository state from http://www.denx.de/git/u-boot-mpc83xx.git $
Should be working now. Please try again.
perfect.
Please pull
http://www.denx.de/git/u-boot-mpc83xx.git master
to receive the updates.
Thanks,
Kim
p.s. the thanks for the hint go to jdl.
In message 20070308155155.585fe712.kim.phillips@freescale.com you wrote:
Please pull http://www.denx.de/git/u-boot-mpc83xx.git master to receive the updates.
Done, merged.
I tested it on a TQM8349 board nd confirm that it seems to be working fine.
Two requests:
U-Boot has become very noisy with these changes. I get:
U-Boot 1.2.0-geb92f613 (Mar 8 2007 - 22:53:28) MPC83XX
Clock configuration: Coherent System Bus: 266 MHz Core: 533 MHz Local Bus Controller: 266 MHz Local Bus: 33 MHz DDR: 266 MHz SEC: 88 MHz I2C1: 88 MHz I2C2: 266 MHz TSEC1: 88 MHz TSEC2: 88 MHz USB MPH: 88 MHz USB DR: 88 MHz CPU: MPC8349E, Rev: 11 at 533.328 MHz Board: TQM834x PCI1: 32 bit, 0 MHz I2C: ready ...
Sometimes it is interesting to see all the clock frequencies, but for normal operation I would prefer to see less output. Before we had this:
Clock configuration: Coherent System Bus: 266 MHz Core: 533 MHz Local Bus: 33 MHz
I think this enough (or already too many lines) for standard use. Maybe you can omit the additional information and provide a new (83xx specific?) command "clocks" or so, which prints the full information if anybody really wants to see it?
More nitpicking: maybe we can align the "CPU:" and "Board:" lines, i. e. make it look like this:
... CPU: MPC8349E, Rev: 11 at 533.328 MHz Board: TQM834x ...
Thanks in advance.
Best regards,
Wolfgang Denk
On Thu, 08 Mar 2007 23:04:43 +0100 Wolfgang Denk wd@denx.de wrote:
In message 20070308155155.585fe712.kim.phillips@freescale.com you wrote:
Please pull http://www.denx.de/git/u-boot-mpc83xx.git master to receive the updates.
Done, merged.
thank you.
I tested it on a TQM8349 board nd confirm that it seems to be working fine.
Two requests:
they are valid requests, especially since Freescale seems to keep on adding devices, as are Stefan Roese's freescale board-common directory request, Dan Malek's comments on the reduction of CONFIG_MPC83XX_TSEC1 and friends to CONFIG_TSEC1, and the folding of the ft_ setup code in the cpu/mpc8* directories, general file replication elimination, etc. All of these are things that will be addressed in due course.
Kim
On Mar 8, 2007, at 2:04 PM, Wolfgang Denk wrote:
... command "clocks" or so, which prints the full information if anybody really wants to see it?
or an environment "info" variable? Could be used to print out more verbose information on various topics if set?
-- Dan
participants (3)
-
Dan Malek -
Kim Phillips -
Wolfgang Denk