hi,

i am using smc driver for blackfin processor. it working fine. i am not sure of the question u have asked. i mean, i havent done any change other than what has been released by you. i havent added any init in eth.c

regards vidya

-----Original Message----- From: u-boot-users-admin@lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net]On Behalf Of Wolfgang Kanovsky Sent: Thursday, May 13, 2004 9:37 PM To: U-Boot-Users Subject: [U-Boot-Users] (no subject) Importance: High

Hi anyone here who knows how the CONFIG_DRIVER_SMC91111 is used ..when the chip is on the ISA - BUS

mean it is not in the eth.c file for init ( i have configured it in the board.h file ...)?

greets Wolfgang K.

------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users