Enable DM_SERIAL for both U_Boot and the SPL. The uart2 and its pinmux are already marked with u-boot,dm-spl but we need to move the call to preloader_console_init() after spl_init() to avoid a board hang as dm can't be used until after spl_init().

Remove the manual config of the UART pinmux now that it is no longer needed.

Signed-off-by: Michael Trimarchi michael@amarulasolutions.com Cc: Tim Harvey tharvey@gateworks.com --- V1->V2: - Follow Tim Harvery suggestion on Peng change - Adjust the commit message as Tim --- board/bsh/imx8mn_smm_s2/spl.c | 11 ++--------- configs/imx8mn_bsh_smm_s2_defconfig | 1 + configs/imx8mn_bsh_smm_s2pro_defconfig | 1 + 3 files changed, 4 insertions(+), 9 deletions(-)

diff --git a/board/bsh/imx8mn_smm_s2/spl.c b/board/bsh/imx8mn_smm_s2/spl.c index 5f04731d72..0f61acc630 100644 --- a/board/bsh/imx8mn_smm_s2/spl.c +++ b/board/bsh/imx8mn_smm_s2/spl.c @@ -40,14 +40,8 @@ void spl_board_init(void) puts("Failed to find clock node. Check device tree\n"); }

-#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)

-static const iomux_v3_cfg_t uart_pads[] = { - IMX8MN_PAD_UART4_RXD__UART4_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), - IMX8MN_PAD_UART4_TXD__UART4_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - static const iomux_v3_cfg_t wdog_pads[] = { IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; @@ -59,7 +53,6 @@ int board_early_init_f(void) imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); set_wdog_reset(wdog);

- imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); init_uart_clk(3);

if (IS_ENABLED(CONFIG_NAND_MXS)) { @@ -82,14 +75,14 @@ void board_init_f(ulong dummy)

timer_init();

- preloader_console_init(); - ret = spl_init(); if (ret) { debug("spl_init() failed: %d\n", ret); hang(); }

+ preloader_console_init(); + /* DDR initialization */ spl_dram_init();

diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig index 3d67079a46..e864685a62 100644 --- a/configs/imx8mn_bsh_smm_s2_defconfig +++ b/configs/imx8mn_bsh_smm_s2_defconfig @@ -80,6 +80,7 @@ CONFIG_SPL_DM_PMIC_BD71837=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_SYSRESET=y CONFIG_SYSRESET_PSCI=y diff --git a/configs/imx8mn_bsh_smm_s2pro_defconfig b/configs/imx8mn_bsh_smm_s2pro_defconfig index c5809f5d4b..dfc9c93809 100644 --- a/configs/imx8mn_bsh_smm_s2pro_defconfig +++ b/configs/imx8mn_bsh_smm_s2pro_defconfig @@ -77,6 +77,7 @@ CONFIG_SPL_DM_PMIC_BD71837=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_SYSRESET=y CONFIG_SYSRESET_PSCI=y