[U-Boot] [PATCH] configs: davinci: omapl138_lcdk: add random eth address support
Any TFTP or DHCP boot on the Davinci OMAP-L138 LCDK board requires that the 'ethaddr' variable be defined. There are no e-fuses to store the ethernet mac address for this platform, and neither is a MAC address reserved in any format. So enable random MAC address support so that networking boot can be supported.
Signed-off-by: Suman Anna s-anna@ti.com --- configs/omapl138_lcdk_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 0629f9636fd4..23fe084e5476 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -21,6 +21,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DIAG=y CONFIG_CMD_UBI=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x28000 CONFIG_SPI_FLASH=y
On Tue, May 16, 2017 at 12:50:18PM -0500, Suman Anna wrote:
Any TFTP or DHCP boot on the Davinci OMAP-L138 LCDK board requires that the 'ethaddr' variable be defined. There are no e-fuses to store the ethernet mac address for this platform, and neither is a MAC address reserved in any format. So enable random MAC address support so that networking boot can be supported.
Signed-off-by: Suman Anna s-anna@ti.com
Reviewed-by: Tom Rini trini@konsulko.com
Hi Tom, Peter,
On 05/16/2017 01:51 PM, Tom Rini wrote:
On Tue, May 16, 2017 at 12:50:18PM -0500, Suman Anna wrote:
Any TFTP or DHCP boot on the Davinci OMAP-L138 LCDK board requires that the 'ethaddr' variable be defined. There are no e-fuses to store the ethernet mac address for this platform, and neither is a MAC address reserved in any format. So enable random MAC address support so that networking boot can be supported.
Signed-off-by: Suman Anna s-anna@ti.com
Reviewed-by: Tom Rini trini@konsulko.com
I haven't seen this patch either in master or next branch yet. Just want to make sure that this has not fallen into some cracks.
regards Suman
On Tuesday 16 May 2017 11:20 PM, Suman Anna wrote:
Any TFTP or DHCP boot on the Davinci OMAP-L138 LCDK board requires that the 'ethaddr' variable be defined. There are no e-fuses to store the ethernet mac address for this platform, and neither is a MAC address reserved in any format. So enable random MAC address support so that networking boot can be supported.
Signed-off-by: Suman Anna s-anna@ti.com
Reviewed-by: Lokesh Vutla lokeshvutla@ti.com
Thanks and regards, Lokesh
On Tue, May 16, 2017 at 12:50:18PM -0500, Anna, Suman wrote:
Any TFTP or DHCP boot on the Davinci OMAP-L138 LCDK board requires that the 'ethaddr' variable be defined. There are no e-fuses to store the ethernet mac address for this platform, and neither is a MAC address reserved in any format. So enable random MAC address support so that networking boot can be supported.
Signed-off-by: Suman Anna s-anna@ti.com Reviewed-by: Tom Rini trini@konsulko.com Reviewed-by: Lokesh Vutla lokeshvutla@ti.com
Applied to u-boot/master, thanks!
participants (3)
-
Lokesh Vutla -
Suman Anna -
Tom Rini