DSPI has pin muxing with SDHC and other IPs, this patch check the value of RCW SPI_PCS_BASE and SPI_BASE_BASE fields, it also check the "hwconfig" configuration, if those pins are configured to DSPI and "hwconfig" enable DSPI, set the BRDCFG5 of QIXIS CPLD to configure the SPI routing to on-board SPI memory. Otherwise will configure to SDHC. Enable DSPI in u-boot "hwconfig" using below command: setenv hwconfig "$hwconfig;dspi"

Signed-off-by: Haikun Wang Haikun.Wang@freescale.com --- board/freescale/ls2085ardb/ls2085ardb.c | 47 +++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)

diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2085ardb/ls2085ardb.c index d05f2bc..674015a 100644 --- a/board/freescale/ls2085ardb/ls2085ardb.c +++ b/board/freescale/ls2085ardb/ls2085ardb.c @@ -10,6 +10,7 @@ #include <fsl_ifc.h> #include <fsl_ddr.h> #include <asm/io.h> +#include <hwconfig.h> #include <fdt_support.h> #include <libfdt.h> #include <fsl_debug_server.h> @@ -21,8 +22,17 @@ #include "../common/qixis.h" #include "ls2085ardb_qixis.h"

+#define PIN_MUX_SEL_SDHC 0x00 +#define PIN_MUX_SEL_DSPI 0x0a + +#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0xf0) | value) DECLARE_GLOBAL_DATA_PTR;

+enum { + MUX_TYPE_SDHC, + MUX_TYPE_DSPI, +}; + unsigned long long get_qixis_addr(void) { unsigned long long addr; @@ -109,10 +119,47 @@ int select_i2c_ch_pca9547(u8 ch) return 0; }

+int config_board_mux(int ctrl_type) +{ + u8 reg5; + + reg5 = QIXIS_READ(brdcfg[5]); + + switch (ctrl_type) { + case MUX_TYPE_SDHC: + reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_SDHC); + break; + case MUX_TYPE_DSPI: + reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_DSPI); + break; + default: + printf("Wrong mux interface type\n"); + return -1; + } + + QIXIS_WRITE(brdcfg[5], reg5); + + return 0; +} + int board_init(void) { + char *env_hwconfig; + u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; + u32 val; + init_final_memctl_regs();

+ val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4); + + env_hwconfig = getenv("hwconfig"); + + if (hwconfig_f("dspi", env_hwconfig) && + DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8))) + config_board_mux(MUX_TYPE_DSPI); + else + config_board_mux(MUX_TYPE_SDHC); + #ifdef CONFIG_ENV_IS_NOWHERE gd->env_addr = (ulong)&default_environment[0]; #endif