st 23. 2. 2022 v 15:02 odesílatel Michal Simek michal.simek@xilinx.com napsal:

From: Ashok Reddy Soma ashok.reddy.soma@xilinx.com

Based on discussion at https://lore.kernel.org/r/20200318125003.GA2727094@kroah.com we got recommendation to use explicit values for all enums.

So, add explicit values to all pinctrl related enums for readability.

Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com

---

include/dm/pinctrl.h | 48 ++++++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h index 8b869c4fbfb7..0c461e56bb48 100644 --- a/include/dm/pinctrl.h +++ b/include/dm/pinctrl.h @@ -453,30 +453,30 @@ struct pinctrl_ops {

• presented using the packed format.
  

*/ enum pin_config_param {

•   PIN_CONFIG_BIAS_BUS_HOLD,
  

•   PIN_CONFIG_BIAS_DISABLE,
  

•   PIN_CONFIG_BIAS_HIGH_IMPEDANCE,
  

•   PIN_CONFIG_BIAS_PULL_DOWN,
  

•   PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
  

•   PIN_CONFIG_BIAS_PULL_UP,
  

•   PIN_CONFIG_DRIVE_OPEN_DRAIN,
  

•   PIN_CONFIG_DRIVE_OPEN_SOURCE,
  

•   PIN_CONFIG_DRIVE_PUSH_PULL,
  

•   PIN_CONFIG_DRIVE_STRENGTH,
  

•   PIN_CONFIG_DRIVE_STRENGTH_UA,
  

•   PIN_CONFIG_INPUT_DEBOUNCE,
  

•   PIN_CONFIG_INPUT_ENABLE,
  

•   PIN_CONFIG_INPUT_SCHMITT,
  

•   PIN_CONFIG_INPUT_SCHMITT_ENABLE,
  

•   PIN_CONFIG_LOW_POWER_MODE,
  

•   PIN_CONFIG_OUTPUT_ENABLE,
  

•   PIN_CONFIG_OUTPUT,
  

•   PIN_CONFIG_POWER_SOURCE,
  

•   PIN_CONFIG_SLEEP_HARDWARE_STATE,
  

•   PIN_CONFIG_SLEW_RATE,
  

•   PIN_CONFIG_SKEW_DELAY,
  

•   PIN_CONFIG_END = 0x7F,
  

•   PIN_CONFIG_MAX = 0xFF,
  

•   PIN_CONFIG_BIAS_BUS_HOLD = 0,
  

•   PIN_CONFIG_BIAS_DISABLE = 1,
  

•   PIN_CONFIG_BIAS_HIGH_IMPEDANCE = 2,
  

•   PIN_CONFIG_BIAS_PULL_DOWN = 3,
  

•   PIN_CONFIG_BIAS_PULL_PIN_DEFAULT = 4,
  

•   PIN_CONFIG_BIAS_PULL_UP = 5,
  

•   PIN_CONFIG_DRIVE_OPEN_DRAIN = 6,
  

•   PIN_CONFIG_DRIVE_OPEN_SOURCE = 7,
  

•   PIN_CONFIG_DRIVE_PUSH_PULL = 8,
  

•   PIN_CONFIG_DRIVE_STRENGTH = 9,
  

•   PIN_CONFIG_DRIVE_STRENGTH_UA = 10,
  

•   PIN_CONFIG_INPUT_DEBOUNCE = 11,
  

•   PIN_CONFIG_INPUT_ENABLE = 12,
  

•   PIN_CONFIG_INPUT_SCHMITT = 13,
  

•   PIN_CONFIG_INPUT_SCHMITT_ENABLE = 14,
  

•   PIN_CONFIG_LOW_POWER_MODE = 15,
  

•   PIN_CONFIG_OUTPUT_ENABLE = 16,
  

•   PIN_CONFIG_OUTPUT = 17,
  

•   PIN_CONFIG_POWER_SOURCE = 18,
  

•   PIN_CONFIG_SLEEP_HARDWARE_STATE = 19,
  

•   PIN_CONFIG_SLEW_RATE = 20,
  

•   PIN_CONFIG_SKEW_DELAY = 21,
  

•   PIN_CONFIG_END = 127,   /* 0x7F */
  

•   PIN_CONFIG_MAX = 255, /* 0xFF */
  

};

#if CONFIG_IS_ENABLED(PINCTRL_GENERIC)

2.35.1

Applied. M