[U-Boot] [PATCH] km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUS
KM_ENV_BUS was used for nothing else than an direct assignment to CONFIG_I2C_ENV_EEPROM_BUS. To avoid this, directly use CONFIG_I2C_ENV_EEPROM_BUS instead.
Signed-off-by: Valentin Longchamp valentin.longchamp@keymile.com
---
include/configs/km/km_arm.h | 2 +- include/configs/km_kirkwood.h | 4 ---- 2 files changed, 1 insertion(+), 5 deletions(-)
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index d31e674..04cddb1 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -244,7 +244,7 @@ int get_scl(void); #define CONFIG_SYS_EEPROM_WREN #define CONFIG_ENV_OFFSET 0x0 /* no bracets! */ #define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET) -#define CONFIG_I2C_ENV_EEPROM_BUS KM_ENV_BUS +#define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */ #define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #endif diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index dc26155..a445aaf 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -116,10 +116,6 @@ /* include common defines/options for all arm based Keymile boards */ #include "km/km_arm.h"
-#ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR -#define KM_ENV_BUS 5 /* I2C2 (Mux-Port 5)*/ -#endif - #if defined(CONFIG_KM_PIGGY4_88E6352) /* * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
-----Original Message----- From: Valentin Longchamp [mailto:valentin.longchamp@keymile.com] Sent: 14 October 2014 14:49 To: u-boot@lists.denx.de; Prafulla Wadaskar Cc: Holger Brunck; Valentin Longchamp Subject: [PATCH] km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUS
KM_ENV_BUS was used for nothing else than an direct assignment to CONFIG_I2C_ENV_EEPROM_BUS. To avoid this, directly use CONFIG_I2C_ENV_EEPROM_BUS instead.
Signed-off-by: Valentin Longchamp valentin.longchamp@keymile.com
include/configs/km/km_arm.h | 2 +- include/configs/km_kirkwood.h | 4 ---- 2 files changed, 1 insertion(+), 5 deletions(-)
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index d31e674..04cddb1 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -244,7 +244,7 @@ int get_scl(void); #define CONFIG_SYS_EEPROM_WREN #define CONFIG_ENV_OFFSET 0x0 /* no bracets! */ #define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET) -#define CONFIG_I2C_ENV_EEPROM_BUS KM_ENV_BUS +#define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */ #define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #endif diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index dc26155..a445aaf 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -116,10 +116,6 @@ /* include common defines/options for all arm based Keymile boards */ #include "km/km_arm.h"
-#ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR -#define KM_ENV_BUS 5 /* I2C2 (Mux-Port 5)*/ -#endif
#if defined(CONFIG_KM_PIGGY4_88E6352) /*
- Some keymile boards like mgcoge5un & nusa1 have
their PIGGY4 connected via
Applied to u-boot-marvell.git master branch
Regards... Prafulla . . .
participants (2)
-
Prafulla Wadaskar -
Valentin Longchamp