hi, I am submitting a patch for TI OMAP 1510 board (based on Arm925) for u-boot 0.4.0. Since I am doing it for the first time I might have left out a few silly things, It will be really helpful if you can give me comments on the patch. And also is there a naming convention I should follow while submitting a patch.

Since the patch is quite huge , I have divided the patch has been divide into four There is no logical partitioning between these patches. Please apply them in sequence.

patch 1 - patch-omap1510-a.tar.bz2 file CHANGELOG file CREDITS file MAINTAINERS file MAKEALL file Makefile file README file board/omap1510inn/Makefile file board/omap1510inn/config.mk file board/omap1510inn/flash.c file board/omap1510inn/omap1510innovator.c file board/omap1510inn/platform.S file board/omap1510inn/u-boot.lds file common/cmd_boot.c file common/cmd_nand.c file cpu/arm925t/Makefile file cpu/arm925t/config.mk file cpu/arm925t/cpu.c file cpu/arm925t/interrupts.c file cpu/arm925t/omap925.c file cpu/arm925t/start.S

patch 2 - patch-omap1510-b.tar.bz2 file drivers/Makefile file drivers/crpath file drivers/ns16550.c file drivers/serial.c file drivers/smc91111.c file examples/Makefile file include/arm925t.h file include/asm-ppc/hymod.h file include/common.h file include/configs/omap1510.h file include/configs/omap1510inn.h file include/flash.h file include/linux/mtd/nand.h file include/ns16550.h

patch 3 - patch-omap1510-c.tar.bz2 file drivers/smc9196.c file drivers/smc9196.h file include/asm-arm/arch-arm925t/arch_ck.h file include/asm-arm/arch-arm925t/ck.h file include/asm-arm/arch-arm925t/dma.h file include/asm-arm/arch-arm925t/fpga.h file include/asm-arm/arch-arm925t/hardware.h file include/asm-arm/arch-arm925t/innovator.h file include/asm-arm/arch-arm925t/io.h file include/asm-arm/arch-arm925t/irq.h file include/asm-arm/arch-arm925t/irqs.h

patch 4 - patch-omap1510-d.tar.bz2

file include/asm-arm/arch-arm925t/keyboard.h file include/asm-arm/arch-arm925t/mcbsp.h file include/asm-arm/arch-arm925t/memory.h file include/asm-arm/arch-arm925t/omap1510_dpm.h file include/asm-arm/arch-arm925t/omap1510p1.h file include/asm-arm/arch-arm925t/omap_pm.h file include/asm-arm/arch-arm925t/param.h file include/asm-arm/arch-arm925t/pm.h file include/asm-arm/arch-arm925t/preem_latency.h file include/asm-arm/arch-arm925t/serial.h file include/asm-arm/arch-arm925t/sizes.h file include/asm-arm/arch-arm925t/system.h file include/asm-arm/arch-arm925t/time.h file include/asm-arm/arch-arm925t/timer.h file include/asm-arm/arch-arm925t/timex.h file include/asm-arm/arch-arm925t/uncompress.h file include/asm-arm/arch-arm925t/vmalloc.h

This patch I am submitting is as a diff to the u-boot 0.4.0 version. To compile the code for omap we have to run make omap1510inn_config. warm regards -kshitij -------------------------------------------- **** **** Kshitij ******o**** Software Engineer ********_///_**** Texas Instruments ******/_//_/***** Wind Tunnel Road ** ***(__/***** Bangalore ********* Voice: +91-80-5048090 ***** Fax: +91-80-5099730 *** --------------------------------------------