Tinker board needs to mux all the sdmmc gpio and activate the regulator connected to bank 7. Remove all the bank that are not in use an mark dm,spl the part that need to run there

Signed-off-by: Michael Trimarchi michael@amarulasolutions.com --- arch/arm/dts/rk3288-tinker-u-boot.dtsi | 26 +++++++++++++++++++------- configs/tinker-rk3288_defconfig | 7 ++++++- 2 files changed, 25 insertions(+), 8 deletions(-)

diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi index 2efb309d6b..f7f9d6dc72 100644 --- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi +++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi @@ -13,20 +13,20 @@ u-boot,dm-pre-reloc; };

-&sdmmc { +&uart2_xfer { u-boot,dm-pre-reloc; };

-&emmc { - u-boot,dm-pre-reloc; +&sdmmc { + u-boot,dm-spl; };

-&gpio3 { - u-boot,dm-pre-reloc; +&gpio7 { + u-boot,dm-spl; };

-&gpio8 { - u-boot,dm-pre-reloc; +&vcc_sd { + u-boot,dm-spl; };

&pcfg_pull_none_drv_8ma { @@ -37,10 +37,22 @@ u-boot,dm-spl; };

+&pcfg_pull_none { + u-boot,dm-spl; +}; + +&pcfg_pull_up { + u-boot,dm-spl; +}; + &sdmmc_bus4 { u-boot,dm-spl; };

+&sdmmc_cd { + u-boot,dm-spl; +}; + &sdmmc_clk { u-boot,dm-spl; }; diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig index 443f4d88b9..73496901d5 100644 --- a/configs/tinker-rk3288_defconfig +++ b/configs/tinker-rk3288_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SPL_GPIO_SUPPORT=y CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_TINKER_RK3288=y CONFIG_NR_DRAM_BANKS=1 @@ -8,6 +9,7 @@ CONFIG_SPL_SIZE_LIMIT=307200 CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y +CONFIG_SPL_TEXT_BASE=0 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_SILENT_CONSOLE=y @@ -15,7 +17,8 @@ CONFIG_CONSOLE_MUX=y CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_TEXT_BASE=0 +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y @@ -61,7 +64,9 @@ CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_DM_PMIC=y CONFIG_PMIC_RK8XX=y +CONFIG_SPL_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y +CONFIG_SPL_DM_REGULATOR_FIXED=y CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y