Hello,

I am trying to use fitImage instead of uImage on different test-systems, but ran into some issues and don´t know how to proceed further.

I am building fitImage with an Yocto build system using the patches provided by Marek Vasut to Yocto.

My first target was the Beaglebone Black, which worked fine, it created a fitImage, which I booted from sd-card using the values provided in the docs (U-Boot 2014.07 TI staging):

ext2load mmc 0:2 82000000 /boot/fitImage setenv bootargs root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 bootm 82000000

<booting...>

My second target was a Raspberry Pi, which I tried boot the same way: (U-Boot 2014.07 denx master)

ext2load mmc 0:2 ${kernel_addr_r} /boot/fitImage setenv bootargs console=ttyAMA0 kgdboc=ttyAMA0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait bootm ${kernel_addr_r}

Output: Wrong Image Format for bootm command ERROR: can't get kernel image!

iminfo ${kernel_addr_r} ## Checking Image at 01000000 ... Unknown image format!

The strange thing is, if I copy the fitImage from the Raspberry PI to the Beagleboard SD card and try to read it from the Beagle:

ext2load mmc 0:2 82000000 /boot/fitImage.rpi iminfo 82000000

## Checking Image at 82000000 ... FIT image found FIT description: U-Boot fitImage for Poky (Yocto Project Reference Distro)/3.16.2+git6159fc07f1bbda28dc967163a49fadb71225f5b3/raspberrypi ....

I don´t know what I did wrong, the fitImage itself seems to be working. Do I use the wrong address to load the Image? The commands for the RPi work if using uImage. I also changed the U-Boot on the RPi from the Denx to the TI version, also with no luck.

Any ideas?