On Friday, August 26, 2011 02:25:33 PM Wolfgang Denk wrote:

Signed-off-by: Wolfgang Denk wd@denx.de Cc: Rowel Atienza rowel@diwalabs.com

---

MAINTAINERS | 4 - MAKEALL | 1 - board/armadillo/Makefile | 55 ------- board/armadillo/armadillo.c | 72 -------- board/armadillo/config.mk | 29 ---- board/armadillo/flash.c | 340 --------------------------------------- board/armadillo/lowlevel_init.S | 66 -------- boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/armadillo.h | 157 ------------------ 10 files changed, 1 insertions(+), 725 deletions(-) delete mode 100644 board/armadillo/Makefile delete mode 100644 board/armadillo/armadillo.c delete mode 100644 board/armadillo/config.mk delete mode 100644 board/armadillo/flash.c delete mode 100644 board/armadillo/lowlevel_init.S delete mode 100644 include/configs/armadillo.h

This one can be fixed with such a patch, though I dunno if it's worth it.

diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h index d0d0998..8a2d2b7 100644 --- a/include/configs/armadillo.h +++ b/include/configs/armadillo.h @@ -135,6 +135,8 @@ #define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */

#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (PHYS_SDRAM_1 + CONFIG_STACKSIZE)

/*----------------------------------------------------------------------- * FLASH and environment organization

Remove edb9301, edb9302, edb9302a, edb9307, edb9307a, edb9312, edb9315 and edb9315a boards.

Signed-off-by: Wolfgang Denk wd@denx.de --- MAKEALL | 8 -- Makefile | 10 -- board/edb93xx/Makefile | 50 -------- board/edb93xx/config.mk | 33 ----- board/edb93xx/early_udelay.h | 34 ------ board/edb93xx/edb93xx.c | 110 ----------------- board/edb93xx/flash_cfg.c | 38 ------ board/edb93xx/pll_cfg.c | 58 --------- board/edb93xx/pll_cfg.h | 72 ----------- board/edb93xx/sdram_cfg.c | 146 ----------------------- board/edb93xx/sdram_cfg.h | 144 ---------------------- doc/README.scrapyard | 8 ++ include/configs/edb93xx.h | 269 ------------------------------------------ 13 files changed, 8 insertions(+), 972 deletions(-) delete mode 100644 board/edb93xx/Makefile delete mode 100644 board/edb93xx/config.mk delete mode 100644 board/edb93xx/early_udelay.h delete mode 100644 board/edb93xx/edb93xx.c delete mode 100644 board/edb93xx/flash_cfg.c delete mode 100644 board/edb93xx/pll_cfg.c delete mode 100644 board/edb93xx/pll_cfg.h delete mode 100644 board/edb93xx/sdram_cfg.c delete mode 100644 board/edb93xx/sdram_cfg.h delete mode 100644 include/configs/edb93xx.h

diff --git a/MAKEALL b/MAKEALL index 63315fb..289cd8b 100755 --- a/MAKEALL +++ b/MAKEALL @@ -318,14 +318,6 @@ LIST_ARM9=" \ aspenite \ da830evm \ da850evm \ - edb9301 \ - edb9302 \ - edb9302a \ - edb9307 \ - edb9307a \ - edb9312 \ - edb9315 \ - edb9315a \ edminiv2 \ guruplug \ imx27lite \ diff --git a/Makefile b/Makefile index 676dc29..6cafb99 100644 --- a/Makefile +++ b/Makefile @@ -851,16 +851,6 @@ tx25_config : unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25

-edb9301_config \ -edb9302_config \ -edb9302a_config \ -edb9307_config \ -edb9307a_config \ -edb9312_config \ -edb9315_config \ -edb9315a_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx - ######################################################################### ## XScale Systems ######################################################################### diff --git a/board/edb93xx/Makefile b/board/edb93xx/Makefile deleted file mode 100644 index dcaed06..0000000 --- a/board/edb93xx/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := edb93xx.o flash_cfg.o pll_cfg.o sdram_cfg.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/edb93xx/config.mk b/board/edb93xx/config.mk deleted file mode 100644 index fab59ef..0000000 --- a/board/edb93xx/config.mk +++ /dev/null @@ -1,33 +0,0 @@ -LDSCRIPT := $(SRCTREE)/arch/arm/cpu/arm920t/ep93xx/u-boot.lds - -ifdef CONFIG_EDB9301 -CONFIG_SYS_TEXT_BASE = 0x05700000 -endif - -ifdef CONFIG_EDB9302 -CONFIG_SYS_TEXT_BASE = 0x05700000 -endif - -ifdef CONFIG_EDB9302A -CONFIG_SYS_TEXT_BASE = 0xc5700000 -endif - -ifdef CONFIG_EDB9307 -CONFIG_SYS_TEXT_BASE = 0x01f00000 -endif - -ifdef CONFIG_EDB9307A -CONFIG_SYS_TEXT_BASE = 0xc1f00000 -endif - -ifdef CONFIG_EDB9312 -CONFIG_SYS_TEXT_BASE = 0x01f00000 -endif - -ifdef CONFIG_EDB9315 -CONFIG_SYS_TEXT_BASE = 0x01f00000 -endif - -ifdef CONFIG_EDB9315A -CONFIG_SYS_TEXT_BASE = 0xc1f00000 -endif diff --git a/board/edb93xx/early_udelay.h b/board/edb93xx/early_udelay.h deleted file mode 100644 index 185283d..0000000 --- a/board/edb93xx/early_udelay.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2009 Matthias Kaehlcke matthias@kaehlcke.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -/* delay execution before timers are initialized */ -static inline void early_udelay(uint32_t usecs) -{ - /* loop takes 4 cycles at 5.0ns (fastest case, running at 200MHz) */ - register uint32_t loops = usecs * (1000 / 20); - - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} diff --git a/board/edb93xx/edb93xx.c b/board/edb93xx/edb93xx.c deleted file mode 100644 index dde30ff..0000000 --- a/board/edb93xx/edb93xx.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Copyright (C) 2009 Matthias Kaehlcke matthias@kaehlcke.net - * - * (C) Copyright 2002 2003 - * Network Audio Technologies, Inc. <www.netaudiotech.com> - * Adam Bezanson bezanson@netaudiotech.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/ep93xx.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define MAX_BANK_SIZE 0x04000000 /* 64 MB */ - -static ulong const bank_addr[CONFIG_NR_DRAM_BANKS] = { - PHYS_SDRAM_1, -#ifdef PHYS_SDRAM_2 - PHYS_SDRAM_2, -#endif -#ifdef PHYS_SDRAM_3 - PHYS_SDRAM_3, -#endif -#ifdef PHYS_SDRAM_4 - PHYS_SDRAM_4 -#endif -}; - -int board_init(void) -{ - struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; - - icache_enable(); - -#ifdef USE_920T_MMU - dcache_enable(); -#endif - - /* - * set UARTBAUD bit to drive UARTs with 14.7456MHz instead of - * 14.7456/2 MHz - */ - uint32_t value = readl(&syscon->pwrcnt); - value |= SYSCON_PWRCNT_UART_BAUD; - writel(value, &syscon->pwrcnt); - - /* Enable the uart in devicecfg */ - value = readl(&syscon->devicecfg); - value |= 1<<18 /* U1EN */; - writel(0xAA, &syscon->sysswlock); - writel(value, &syscon->devicecfg); - - /* Machine number, as defined in linux/arch/arm/tools/mach-types */ - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* We have a console */ - gd->have_console = 1; - - return 0; -} - -int board_eth_init(bd_t *bd) -{ - return ep93xx_eth_initialize(0, MAC_BASE); -} - -int dram_init(void) -{ - unsigned int *src, *dst; - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - const ulong bank_size = get_ram_size((long *)bank_addr[i], - MAX_BANK_SIZE); - if (bank_size) { - gd->bd->bi_dram[i].start = bank_addr[i]; - gd->bd->bi_dram[i].size = bank_size; - } - } - - /* copy exception vectors */ - src = (unsigned int *)_armboot_start; - dst = (unsigned int *)PHYS_SDRAM_1; - memcpy(dst, src, 16 * sizeof(unsigned int)); - - return 0; -} diff --git a/board/edb93xx/flash_cfg.c b/board/edb93xx/flash_cfg.c deleted file mode 100644 index a4c2048..0000000 --- a/board/edb93xx/flash_cfg.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Flash setup for Cirrus edb93xx boards - * - * Copyright (C) 2009 Matthias Kaehlcke matthias@kaehlcke.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/ep93xx.h> -#include <asm/io.h> - -#define SMC_BCR6_VALUE (2 << SMC_BCR_IDCY_SHIFT | 5 << SMC_BCR_WST1_SHIFT | \ - SMC_BCR_BLE | 2 << SMC_BCR_WST2_SHIFT | \ - 1 << SMC_BCR_MW_SHIFT) - -void flash_cfg(void) -{ - struct smc_regs *smc = (struct smc_regs *)SMC_BASE; - - writel(SMC_BCR6_VALUE, &smc->bcr6); -} diff --git a/board/edb93xx/pll_cfg.c b/board/edb93xx/pll_cfg.c deleted file mode 100644 index a687af0..0000000 --- a/board/edb93xx/pll_cfg.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * PLL setup for Cirrus edb93xx boards - * - * Copyright (C) 2009 Matthias Kaehlcke matthias@kaehlcke.net - * - * Copyright (C) 2006 Dominic Rath Dominic.Rath@gmx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include "pll_cfg.h" -#include "early_udelay.h" - -void pll_cfg(void) -{ - struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; - - /* setup PLL1 */ - writel(CLKSET1_VAL, &syscon->clkset1); - - /* - * flush the pipeline - * writing to CLKSET1 causes the EP93xx to enter standby for between - * 8 ms to 16 ms, until PLL1 stabilizes - */ - asm("nop"); - asm("nop"); - asm("nop"); - asm("nop"); - asm("nop"); - - /* setup PLL2 */ - writel(CLKSET2_VAL, &syscon->clkset2); - - /* - * the user's guide recommends to wait at least 1 ms for PLL2 to - * stabilize - */ - early_udelay(1000); -} diff --git a/board/edb93xx/pll_cfg.h b/board/edb93xx/pll_cfg.h deleted file mode 100644 index 0b6f469..0000000 --- a/board/edb93xx/pll_cfg.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * PLL register values for Cirrus edb93xx boards - * - * Copyright (C) 2009 Matthias Kaehlcke matthias@kaehlcke.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/arch/ep93xx.h> - -#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \ - defined(CONFIG_EDB9302A) -/* - * fclk_div: 2, nbyp1: 1, hclk_div: 5, pclk_div: 2 - * pll1_x1: 294912000.000000, pll1_x2ip: 36864000.000000, - * pll1_x2: 331776000.000000, pll1_out: 331776000.000000 - */ -#define CLKSET1_VAL (7 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \ - 8 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \ - 19 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \ - 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \ - 3 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \ - SYSCON_CLKSET1_NBYP1 | \ - 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT) -#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \ - defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \ - defined(CONFIG_EDB9315A) -/* - * fclk_div: 2, nbyp1: 1, hclk_div: 4, pclk_div: 2 - * pll1_x1: 3096576000.000000, pll1_x2ip: 129024000.000000, - * pll1_x2: 3999744000.000000, pll1_out: 1999872000.000000 - */ -#define CLKSET1_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \ - 30 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \ - 20 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \ - 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \ - 2 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \ - SYSCON_CLKSET1_NBYP1 | \ - 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT) -#else -#error "Undefined board" -#endif - -/* - * usb_div: 4, nbyp2: 1, pll2_en: 1 - * pll2_x1: 368640000.000000, pll2_x2ip: 15360000.000000, - * pll2_x2: 384000000.000000, pll2_out: 192000000.000000 - */ -#define CLKSET2_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \ - 24 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \ - 24 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \ - 1 << SYSCON_CLKSET_PLL_PS_SHIFT | \ - SYSCON_CLKSET2_PLL2_EN | \ - SYSCON_CLKSET2_NBYP2 | \ - 3 << SYSCON_CLKSET2_USB_DIV_SHIFT) diff --git a/board/edb93xx/sdram_cfg.c b/board/edb93xx/sdram_cfg.c deleted file mode 100644 index 440ad11..0000000 --- a/board/edb93xx/sdram_cfg.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Copyright (C) 2009, 2010 Matthias Kaehlcke matthias@kaehlcke.net - * - * Copyright (C) 2006 Dominic Rath Dominic.Rath@gmx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <asm/io.h> -#include "sdram_cfg.h" -#include "early_udelay.h" - -#define PROGRAM_MODE_REG(bank) (*(volatile uint32_t *) \ - (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank | SDRAM_MODE_REG_VAL)) - -#define PRECHARGE_BANK(bank) (*(volatile uint32_t *) \ - (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank)) = 0 - -static void precharge_all_banks(void); -static void setup_refresh_timer(void); -static void program_mode_registers(void); - -void sdram_cfg(void) -{ - struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE; - - writel(SDRAM_DEVCFG_VAL, &sdram->SDRAM_DEVCFG_REG); - - /* Issue continous NOP commands */ - writel(GLCONFIG_INIT | GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig); - - early_udelay(200); - - precharge_all_banks(); - - setup_refresh_timer(); - - program_mode_registers(); - - /* Select normal operation mode */ - writel(GLCONFIG_CKE, &sdram->glconfig); -} - -static void precharge_all_banks(void) -{ - struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE; - - /* Issue PRECHARGE ALL commands */ - writel(GLCONFIG_INIT | GLCONFIG_CKE, &sdram->glconfig); - - /* - * Errata of most EP93xx revisions say that PRECHARGE ALL isn't always - * issued - * - * Cirrus proposes a workaround which consists in performing a read from - * each bank to force the precharge. This causes some boards to hang. - * Writing to the SDRAM banks instead of reading has the same - * side-effect (the SDRAM controller issues the necessary precharges), - * but is known to work on all supported boards - */ - - PRECHARGE_BANK(0); - -#if (CONFIG_NR_DRAM_BANKS >= 2) - PRECHARGE_BANK(1); -#endif - -#if (CONFIG_NR_DRAM_BANKS >= 3) - PRECHARGE_BANK(2); -#endif - -#if (CONFIG_NR_DRAM_BANKS == 4) - PRECHARGE_BANK(3); -#endif -} - -static void setup_refresh_timer(void) -{ - struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE; - - /* Load refresh timer with 10 to issue refresh every 10 cycles */ - writel(0x0a, &sdram->refrshtimr); - - /* - * Wait at least 80 clock cycles to provide 8 refresh cycles - * to all SDRAMs - */ - early_udelay(1); - - /* - * Program refresh timer with normal value - * We need 8192 refresh cycles every 64ms - * at 15ns (HCLK >= 66MHz) per cycle: - * 64ms / 8192 = 7.8125us - * 7.8125us / 15ns = 520 (0x208) - */ - /* - * TODO: redboot uses 0x1e0 for the slowest possible device - * but i don't understand how this value is calculated - */ - writel(0x208, &sdram->refrshtimr); -} - -static void program_mode_registers(void) -{ - struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE; - - /* Select mode register update mode */ - writel(GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig); - - /* - * The mode registers are programmed by performing a read from each - * SDRAM bank. The value of the address that is read defines the value - * that is written into the mode register - */ - - PROGRAM_MODE_REG(0); - -#if (CONFIG_NR_DRAM_BANKS >= 2) - PROGRAM_MODE_REG(1); -#endif - -#if (CONFIG_NR_DRAM_BANKS >= 3) - PROGRAM_MODE_REG(2); -#endif - -#if (CONFIG_NR_DRAM_BANKS == 4) - PROGRAM_MODE_REG(3); -#endif -} diff --git a/board/edb93xx/sdram_cfg.h b/board/edb93xx/sdram_cfg.h deleted file mode 100644 index 757b63c..0000000 --- a/board/edb93xx/sdram_cfg.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2009 Matthias Kaehlcke matthias@kaehlcke.net - * - * Copyright (C) 2006 Dominic Rath Dominic.Rath@gmx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/arch/ep93xx.h> - -#define SDRAM_BASE_ADDR PHYS_SDRAM_1 - -#ifdef CONFIG_EDB93XX_SDCS0 -#define SDRAM_DEVCFG_REG devcfg0 -#elif defined(CONFIG_EDB93XX_SDCS3) -#define SDRAM_DEVCFG_REG devcfg3 -#else -#error "SDRAM bank configuration" -#endif - -#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \ - defined(CONFIG_EDB9302A) -/* - * 1x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM - * - * CLK cycle time min: - * @ CAS latency = 3: 7.5ns - * @ CAS latency = 2: 10ns - * We're running at 66MHz (15ns cycle time) external bus speed (HCLK), - * so it's safe to use CAS latency = 2 - * - * RAS-to-CAS delay min: - * 20ns - * At 15ns cycle time, we use RAS-to-CAS delay = 2 - * - * SROMLL = 1: Swap BA[1:0] with A[13:12], making the SDRAM appear - * as four blocks of 8MB size, instead of eight blocks of 4MB size: - * - * EDB9301/EDB9302: - * - * 0x00000000 - 0x007fffff - * 0x01000000 - 0x017fffff - * 0x04000000 - 0x047fffff - * 0x05000000 - 0x057fffff - * - * - * EDB9302a: - * - * 0xc0000000 - 0xc07fffff - * 0xc1000000 - 0xc17fffff - * 0xc4000000 - 0xc47fffff - * 0xc5000000 - 0xc57fffff - * - * BANKCOUNT = 1: This is a device with four banks - */ - -#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \ - SDRAM_DEVCFG_SROMLL | \ - SDRAM_DEVCFG_CASLAT_2 | \ - SDRAM_DEVCFG_RASTOCAS_2 | \ - SDRAM_DEVCFG_EXTBUSWIDTH) - -/* - * 16 bit ext. bus - * - * A[22:09] is output as SYA[13:0] - * CAS latency: 2 - * Burst type: sequential - * Burst length: 8 (required for 16 bit ext. bus) - * SYA[13:0] = 0x0023 - */ -#define SDRAM_MODE_REG_VAL 0x4600 - -#define SDRAM_BANK_SEL_0 0x00000000 /* A[22:21] = b00 */ -#define SDRAM_BANK_SEL_1 0x00200000 /* A[22:21] = b01 */ -#define SDRAM_BANK_SEL_2 0x00400000 /* A[22:21] = b10 */ -#define SDRAM_BANK_SEL_3 0x00600000 /* A[22:21] = b11 */ - -#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \ - defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \ - defined(CONFIG_EDB9315A) -/* - * 2x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM - * - * CLK cycle time min: - * @ CAS latency = 3: 7.5ns - * @ CAS latency = 2: 10ns - * We're running at 100MHz (10ns cycle time) external bus speed (HCLK), - * so it's safe to use CAS latency = 2 - * - * RAS-to-CAS delay min: - * 20ns - * At 10ns cycle time, we use RAS-to-CAS delay = 2 - * - * EDB9307, EDB9312, EDB9315: - * - * 0x00000000 - 0x01ffffff - * 0x04000000 - 0x05ffffff - * - * - * EDB9307a, EDB9315a: - * - * 0xc0000000 - 0xc1ffffff - * 0xc4000000 - 0xc5ffffff - */ - -#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \ - SDRAM_DEVCFG_SROMLL | \ - SDRAM_DEVCFG_CASLAT_2 | \ - SDRAM_DEVCFG_RASTOCAS_2) - -/* - * 32 bit ext. bus - * - * A[23:10] is output as SYA[13:0] - * CAS latency: 2 - * Burst type: sequential - * Burst length: 4 - * SYA[13:0] = 0x0022 - */ -#define SDRAM_MODE_REG_VAL 0x8800 - -#define SDRAM_BANK_SEL_0 0x00000000 /* A[23:22] = b00 */ -#define SDRAM_BANK_SEL_1 0x00400000 /* A[23:22] = b01 */ -#define SDRAM_BANK_SEL_2 0x00800000 /* A[23:22] = b10 */ -#define SDRAM_BANK_SEL_3 0x00c00000 /* A[23:22] = b11 */ -#endif diff --git a/doc/README.scrapyard b/doc/README.scrapyard index e12208c..7bd445c 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,14 @@ easily if here is something they might want to dig for...

Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +edb9301 arm arm920t - 2011-07-17 +edb9302 arm arm920t - 2011-07-17 +edb9302a arm arm920t - 2011-07-17 +edb9307 arm arm920t - 2011-07-17 +edb9307a arm arm920t - 2011-07-17 +edb9312 arm arm920t - 2011-07-17 +edb9315 arm arm920t - 2011-07-17 +edb9315a arm arm920t - 2011-07-17 B2 arm s3c44b0 - 2011-07-16 Andrea Scian andrea.scian@dave-tech.it armadillo arm arm720t - 2011-07-16 Rowel Atienza rowel@diwalabs.com trab arm S3C2400 - 2011-05-01 Gary Jennejohn garyj@denx.de diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h deleted file mode 100644 index 19b7632..0000000 --- a/include/configs/edb93xx.h +++ /dev/null @@ -1,269 +0,0 @@ -/* - * U-boot - Configuration file for Cirrus Logic EDB93xx boards - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_edb9301 -#define CONFIG_EDB9301 -#elif defined(CONFIG_edb9302) -#define CONFIG_EDB9302 -#elif defined(CONFIG_edb9302a) -#define CONFIG_EDB9302A -#elif defined(CONFIG_edb9307) -#define CONFIG_EDB9307 -#elif defined(CONFIG_edb9307a) -#define CONFIG_EDB9307A -#elif defined(CONFIG_edb9312) -#define CONFIG_EDB9312 -#elif defined(CONFIG_edb9315) -#define CONFIG_EDB9315 -#elif defined(CONFIG_edb9315a) -#define CONFIG_EDB9315A -#else -#error "no board defined" -#endif - -/* Initial environment and monitor configuration options. */ -#define CONFIG_BOOTDELAY 2 -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp" -#define CONFIG_BOOTFILE "edb93xx.img" - -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#ifdef CONFIG_EDB9301 -#define CONFIG_EP9301 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9301 -#define CONFIG_SYS_PROMPT "EDB9301> " -#define CONFIG_ENV_SECT_SIZE 0x00020000 -#elif defined(CONFIG_EDB9302) -#define CONFIG_EP9302 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302 -#define CONFIG_SYS_PROMPT "EDB9302> " -#define CONFIG_ENV_SECT_SIZE 0x00020000 -#elif defined(CONFIG_EDB9302A) -#define CONFIG_EP9302 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A -#define CONFIG_SYS_PROMPT "EDB9302A> " -#define CONFIG_ENV_SECT_SIZE 0x00020000 -#elif defined(CONFIG_EDB9307) -#define CONFIG_EP9307 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307 -#define CONFIG_SYS_PROMPT "EDB9307> " -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#elif defined(CONFIG_EDB9307A) -#define CONFIG_EP9307 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A -#define CONFIG_SYS_PROMPT "EDB9307A> " -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#elif defined(CONFIG_EDB9312) -#define CONFIG_EP9312 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9312 -#define CONFIG_SYS_PROMPT "EDB9312> " -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#elif defined(CONFIG_EDB9315) -#define CONFIG_EP9315 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315 -#define CONFIG_SYS_PROMPT "EDB9315> " -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#elif defined(CONFIG_EDB9315A) -#define CONFIG_EP9315 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A -#define CONFIG_SYS_PROMPT "EDB9315A> " -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#else -#error "no board defined" -#endif - -/* High-level configuration options */ -#define CONFIG_ARM920T 1 /* This is an ARM920T core... */ -#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */ - -#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ -#define CONFIG_SYS_HZ 1000 /* decr freq: 1 ms ticks */ -#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */ - -/* Monitor configuration */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG - -#undef CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 - -#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ -/* Print buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* Boot argument buffer size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ - -/* Serial port hardware configuration */ -#define CONFIG_PL010_SERIAL -#define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} -#define CONFIG_SYS_SERIAL0 0x808C0000 -#define CONFIG_SYS_SERIAL1 0x808D0000 -#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ - (void *)CONFIG_SYS_SERIAL1} - -/* Status LED */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED 1 -#define STATUS_LED_GREEN 0 -#define STATUS_LED_RED 1 -/* Green */ -#define STATUS_LED_BIT STATUS_LED_GREEN -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -/* Red */ -#define STATUS_LED_BIT1 STATUS_LED_RED -#define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -/* Optional value */ -#define STATUS_LED_BOOT STATUS_LED_BIT - -/* Network hardware configuration */ -#define CONFIG_DRIVER_EP93XX_MAC -#define CONFIG_MII_SUPPRESS_PREAMBLE -#define CONFIG_MII -#define CONFIG_PHY_ADDR 1 -#define CONFIG_NET_MULTI -#undef CONFIG_NETCONSOLE - -/* SDRAM configuration */ -#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) -/* - * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 - * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set - * the SROMLL bit on the processor, resulting in this non-contiguous memory map. - */ -#define CONFIG_NR_DRAM_BANKS 4 -#define PHYS_SDRAM_1 0x00000000 -#define PHYS_SDRAM_SIZE_1 0x00800000 -#define PHYS_SDRAM_2 0x01000000 -#define PHYS_SDRAM_SIZE_2 0x00800000 -#define PHYS_SDRAM_3 0x04000000 -#define PHYS_SDRAM_SIZE_3 0x00800000 -#define PHYS_SDRAM_4 0x05000000 -#define PHYS_SDRAM_SIZE_4 0x00800000 -#define CONFIG_EDB93XX_SDCS3 -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x007fffff - -#elif defined(CONFIG_EDB9302A) -/* - * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 - * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set - * the SROMLL bit on the processor, resulting in this non-contiguous memory map. - */ -#define CONFIG_NR_DRAM_BANKS 4 -#define PHYS_SDRAM_1 0xc0000000 -#define PHYS_SDRAM_SIZE_1 0x00800000 -#define PHYS_SDRAM_2 0xc1000000 -#define PHYS_SDRAM_SIZE_2 0x00800000 -#define PHYS_SDRAM_3 0xc4000000 -#define PHYS_SDRAM_SIZE_3 0x00800000 -#define PHYS_SDRAM_4 0xc5000000 -#define PHYS_SDRAM_SIZE_4 0x00800000 -#define CONFIG_EDB93XX_SDCS0 -#define CONFIG_SYS_MEMTEST_START 0xc0100000 -#define CONFIG_SYS_MEMTEST_END 0xc07fffff - -#elif defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \ - defined(CONFIG_EDB9315) -/* - * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of - * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of - * 64 MB of SDRAM. - */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 0x00000000 -#define PHYS_SDRAM_SIZE_1 0x02000000 -#define PHYS_SDRAM_2 0x04000000 -#define PHYS_SDRAM_SIZE_2 0x02000000 -#define CONFIG_EDB93XX_SDCS3 -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x01e00000 - -#elif defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A) -/* - * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung - * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM. - */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 0xc0000000 -#define PHYS_SDRAM_SIZE_1 0x02000000 -#define PHYS_SDRAM_2 0xc4000000 -#define PHYS_SDRAM_SIZE_2 0x02000000 -#define CONFIG_EDB93XX_SDCS0 -#define CONFIG_SYS_MEMTEST_START 0xc0100000 -#define CONFIG_SYS_MEMTEST_END 0xc1e00000 -#endif - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x01000000) - -/* Must match kernel config */ -#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) - -/* Run-time memory allocatons */ -#define CONFIG_STACKSIZE (128 * 1024) - -#if defined(CONFIG_USE_IRQ) -#define CONFIG_STACKSIZE_IRQ (4 * 1024) -#define CONFIG_STACKSIZE_FIQ (4 * 1024) -#endif - -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) - -/* ----------------------------------------------------------------------------- - * FLASH and environment organization - * - * The EDB9301 and EDB9302(a) have 1 bank of flash memory at 0x60000000 - * consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit data bus, - * for a total of 16 MB of CFI-compatible flash. - * - * The EDB9307(a), EDB9312, and EDB9315(a) have 1 bank of flash memory at - * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit - * data bus, for a total of 32 MB of CFI-compatible flash. - * - * EDB9301/02(a) EDB9307(a)/12/15(a) - * 0x60000000 - 0x0003FFFF u-boot u-boot - * 0x60040000 - 0x0005FFFF environment #1 environment #1 - * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued) - * 0x60080000 - 0x0009FFFF unused environment #2 - * 0x600A0000 - 0x000BFFFF unused environment #2 (continued) - * 0x600C0000 - 0x00FFFFFF unused unused - * 0x61000000 - 0x01FFFFFF not present unused - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -#define PHYS_FLASH_1 0x60000000 -#define CONFIG_SYS_FLASH_BASE (PHYS_FLASH_1) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) - -#define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR 0x60040000 - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) - -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#endif /* !defined (__CONFIG_H) */

Signed-off-by: Wolfgang Denk wd@denx.de --- MAKEALL | 1 - board/mx1fs2/Makefile | 51 --- board/mx1fs2/config.mk | 10 - board/mx1fs2/flash.c | 849 ------------------------------------------ board/mx1fs2/intel.h | 99 ----- board/mx1fs2/lowlevel_init.S | 188 ---------- board/mx1fs2/mx1fs2.c | 122 ------ boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/mx1fs2.h | 305 --------------- 10 files changed, 1 insertions(+), 1626 deletions(-) delete mode 100644 board/mx1fs2/Makefile delete mode 100644 board/mx1fs2/config.mk delete mode 100644 board/mx1fs2/flash.c delete mode 100644 board/mx1fs2/intel.h delete mode 100644 board/mx1fs2/lowlevel_init.S delete mode 100644 board/mx1fs2/mx1fs2.c delete mode 100644 include/configs/mx1fs2.h

diff --git a/MAKEALL b/MAKEALL index 1f6baba..8eaa0d5 100755 --- a/MAKEALL +++ b/MAKEALL @@ -326,7 +326,6 @@ LIST_ARM9=" \ magnesium \ mv88f6281gtw_ge \ mx1ads \ - mx1fs2 \ netstar \ nhk8815 \ nhk8815_onenand \ diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile deleted file mode 100644 index c55b695..0000000 --- a/board/mx1fs2/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := mx1fs2.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mx1fs2/config.mk b/board/mx1fs2/config.mk deleted file mode 100644 index eb4d046..0000000 --- a/board/mx1fs2/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# This config file is used for compilation of IMX sources -# -# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE. -# This allows for example having one copy located at the end of ram and stored -# in flash device and later on while developing use other location to test -# the code in RAM device only. -# - -CONFIG_SYS_TEXT_BASE = 0x08f00000 diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c deleted file mode 100644 index da4ebe6..0000000 --- a/board/mx1fs2/flash.c +++ /dev/null @@ -1,849 +0,0 @@ -/* - * (C) 2000-2004 Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * (C) 2003 August Hoeraendl, Logotronic GmbH - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#undef CONFIG_FLASH_16BIT - -#include <common.h> - -#define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE -#define MAIN_SECT_SIZE MX1FS2_FLASH_SECT_SIZE - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* - * NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it - * has nothing to do with the flash chip being 8-bit or 16-bit. - */ -#ifdef CONFIG_FLASH_16BIT -typedef unsigned short FLASH_PORT_WIDTH; -typedef volatile unsigned short FLASH_PORT_WIDTHV; - -#define FLASH_ID_MASK 0xFFFF -#else -typedef unsigned long FLASH_PORT_WIDTH; -typedef volatile unsigned long FLASH_PORT_WIDTHV; - -#define FLASH_ID_MASK 0xFFFFFFFF -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define ORMASK(size) ((-size) & OR_AM_MSK) - -/*----------------------------------------------------------------------- - * Functions - */ -#if 0 -static ulong flash_get_size(FPWV * addr, flash_info_t * info); -static void flash_get_offsets(ulong base, flash_info_t * info); -#endif -static void flash_reset(flash_info_t * info); -static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data); -static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data); -#define write_word(in, de, da) write_word_amd(in, de, da) -#ifdef CONFIG_SYS_FLASH_PROTECTION -static void flash_sync_real_protect(flash_info_t * info); -#endif - -/*----------------------------------------------------------------------- - * flash_init() - * - * sets up flash_info and returns size of FLASH (bytes) - */ -ulong -flash_init(void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - flash_info[i].flash_id = - (FLASH_MAN_AMD & FLASH_VENDMASK) | - (FLASH_AM640U & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - switch (i) { - case 0: - flashbase = MX1FS2_FLASH_BASE; - break; - default: - panic("configured too many flash banks!\n"); - break; - } - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start, - &flash_info[0]); - - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void -flash_reset(flash_info_t * info) -{ - FPWV *base = (FPWV *) (info->start[0]); - - /* Put FLASH back in read mode */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) - *base = (FPW) 0x00FF00FF; /* Intel Read Mode */ - else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) - *base = (FPW) 0x00F000F0; /* AMD Read Mode */ -} - -/*----------------------------------------------------------------------- - */ -#if 0 -static void -flash_get_offsets(ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL - && (info->flash_id & FLASH_BTYPE)) { - int bootsect_size; /* number of bytes/boot sector */ - int sect_size; /* number of bytes/regular sector */ - - bootsect_size = 0x00002000 * (sizeof (FPW) / 2); - sect_size = 0x00010000 * (sizeof (FPW) / 2); - - /* set sector offsets for bottom boot block type */ - for (i = 0; i < 8; ++i) { - info->start[i] = base + (i * bootsect_size); - } - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i - 7) * sect_size); - } - } else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD - && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) { - - int sect_size; /* number of bytes/sector */ - - sect_size = 0x00010000 * (sizeof (FPW) / 2); - - /* set up sector start address table (uniform sector type) */ - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * sect_size); - } -} -#endif /* 0 */ - -/*----------------------------------------------------------------------- - */ - -void -flash_print_info(flash_info_t * info) -{ - int i; - uchar *boottype; - uchar *bootletter; - char *fmt; - uchar botbootletter[] = "B"; - uchar topbootletter[] = "T"; - uchar botboottype[] = "bottom boot sector"; - uchar topboottype[] = "top boot sector"; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_BM: - printf("BRIGHT MICRO "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_SST: - printf("SST "); - break; - case FLASH_MAN_STM: - printf("STM "); - break; - case FLASH_MAN_INTEL: - printf("INTEL "); - break; - default: - printf("Unknown Vendor "); - break; - } - - /* check for top or bottom boot, if it applies */ - if (info->flash_id & FLASH_BTYPE) { - boottype = botboottype; - bootletter = botbootletter; - } else { - boottype = topboottype; - bootletter = topbootletter; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM640U: - fmt = "29LV641D (64 Mbit, uniform sectors)\n"; - break; - case FLASH_28F800C3B: - case FLASH_28F800C3T: - fmt = "28F800C3%s (8 Mbit, %s)\n"; - break; - case FLASH_INTEL800B: - case FLASH_INTEL800T: - fmt = "28F800B3%s (8 Mbit, %s)\n"; - break; - case FLASH_28F160C3B: - case FLASH_28F160C3T: - fmt = "28F160C3%s (16 Mbit, %s)\n"; - break; - case FLASH_INTEL160B: - case FLASH_INTEL160T: - fmt = "28F160B3%s (16 Mbit, %s)\n"; - break; - case FLASH_28F320C3B: - case FLASH_28F320C3T: - fmt = "28F320C3%s (32 Mbit, %s)\n"; - break; - case FLASH_INTEL320B: - case FLASH_INTEL320T: - fmt = "28F320B3%s (32 Mbit, %s)\n"; - break; - case FLASH_28F640C3B: - case FLASH_28F640C3T: - fmt = "28F640C3%s (64 Mbit, %s)\n"; - break; - case FLASH_INTEL640B: - case FLASH_INTEL640T: - fmt = "28F640B3%s (64 Mbit, %s)\n"; - break; - default: - fmt = "Unknown Chip Type\n"; - break; - } - - printf(fmt, bootletter, boottype); - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) { - printf("\n "); - } - - printf(" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - - printf("\n"); -} - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -#if 0 -ulong -flash_get_size(FPWV * addr, flash_info_t * info) -{ - /* Write auto select command: read Manufacturer ID */ - - /* Write auto select command sequence and test FLASH answer */ - addr[0x0555] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */ - addr[0x02AA] = (FPW) 0x00550055; /* for AMD, Intel ignores this */ - addr[0x0555] = (FPW) 0x00900090; /* selects Intel or AMD */ - - /* The manufacturer codes are only 1 byte, so just use 1 byte. - * This works for any bus width and any FLASH device width. - */ - switch (addr[0] & 0xff) { - - case (uchar) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - - case (uchar) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - - /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */ - if (info->flash_id != FLASH_UNKNOWN) - switch (addr[1]) { - - case (FPW) AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */ - info->flash_id += FLASH_AM640U; - info->sector_count = 128; - info->size = 0x00800000 * (sizeof (FPW) / 2); - break; /* => 8 or 16 MB */ - - case (FPW) INTEL_ID_28F800C3B: - info->flash_id += FLASH_28F800C3B; - info->sector_count = 23; - info->size = 0x00100000 * (sizeof (FPW) / 2); - break; /* => 1 or 2 MB */ - - case (FPW) INTEL_ID_28F800B3B: - info->flash_id += FLASH_INTEL800B; - info->sector_count = 23; - info->size = 0x00100000 * (sizeof (FPW) / 2); - break; /* => 1 or 2 MB */ - - case (FPW) INTEL_ID_28F160C3B: - info->flash_id += FLASH_28F160C3B; - info->sector_count = 39; - info->size = 0x00200000 * (sizeof (FPW) / 2); - break; /* => 2 or 4 MB */ - - case (FPW) INTEL_ID_28F160B3B: - info->flash_id += FLASH_INTEL160B; - info->sector_count = 39; - info->size = 0x00200000 * (sizeof (FPW) / 2); - break; /* => 2 or 4 MB */ - - case (FPW) INTEL_ID_28F320C3B: - info->flash_id += FLASH_28F320C3B; - info->sector_count = 71; - info->size = 0x00400000 * (sizeof (FPW) / 2); - break; /* => 4 or 8 MB */ - - case (FPW) INTEL_ID_28F320B3B: - info->flash_id += FLASH_INTEL320B; - info->sector_count = 71; - info->size = 0x00400000 * (sizeof (FPW) / 2); - break; /* => 4 or 8 MB */ - - case (FPW) INTEL_ID_28F640C3B: - info->flash_id += FLASH_28F640C3B; - info->sector_count = 135; - info->size = 0x00800000 * (sizeof (FPW) / 2); - break; /* => 8 or 16 MB */ - - case (FPW) INTEL_ID_28F640B3B: - info->flash_id += FLASH_INTEL640B; - info->sector_count = 135; - info->size = 0x00800000 * (sizeof (FPW) / 2); - break; /* => 8 or 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* => no or unknown flash */ - } - - flash_get_offsets((ulong) addr, info); - - /* Put FLASH back in read mode */ - flash_reset(info); - - return (info->size); -} -#endif /* 0 */ - -#ifdef CONFIG_SYS_FLASH_PROTECTION -/*----------------------------------------------------------------------- - */ - -static void -flash_sync_real_protect(flash_info_t * info) -{ - FPWV *addr = (FPWV *) (info->start[0]); - FPWV *sect; - int i; - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F800C3B: - case FLASH_28F800C3T: - case FLASH_28F160C3B: - case FLASH_28F160C3T: - case FLASH_28F320C3B: - case FLASH_28F320C3T: - case FLASH_28F640C3B: - case FLASH_28F640C3T: - /* check for protected sectors */ - *addr = (FPW) 0x00900090; - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02. - * D0 = 1 for each device if protected. - * If at least one device is protected the sector is marked - * protected, but mixed protected and unprotected devices - * within a sector should never happen. - */ - sect = (FPWV *) (info->start[i]); - info->protect[i] = - (sect[2] & (FPW) (0x00010001)) ? 1 : 0; - } - - /* Put FLASH back in read mode */ - flash_reset(info); - break; - - case FLASH_AM640U: - default: - /* no hardware protect that we support */ - break; - } -} -#endif - -/*----------------------------------------------------------------------- - */ - -int -flash_erase(flash_info_t * info, int s_first, int s_last) -{ - FPWV *addr; - int flag, prot, sect; - int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL; - ulong start, now, last; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_INTEL800B: - case FLASH_INTEL160B: - case FLASH_INTEL320B: - case FLASH_INTEL640B: - case FLASH_28F800C3B: - case FLASH_28F160C3B: - case FLASH_28F320C3B: - case FLASH_28F640C3B: - case FLASH_AM640U: - break; - case FLASH_UNKNOWN: - default: - printf("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf("\n"); - } - - start = get_timer(0); - last = start; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && rcode == 0; sect++) { - - if (info->protect[sect] != 0) /* protected, skip it */ - continue; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr = (FPWV *) (info->start[sect]); - if (intel) { - *addr = (FPW) 0x00500050; /* clear status register */ - *addr = (FPW) 0x00200020; /* erase setup */ - *addr = (FPW) 0x00D000D0; /* erase confirm */ - } else { - /* must be AMD style if not Intel */ - FPWV *base; /* first address in bank */ - - base = (FPWV *) (info->start[0]); - base[0x0555] = (FPW) 0x00AA00AA; /* unlock */ - base[0x02AA] = (FPW) 0x00550055; /* unlock */ - base[0x0555] = (FPW) 0x00800080; /* erase mode */ - base[0x0555] = (FPW) 0x00AA00AA; /* unlock */ - base[0x02AA] = (FPW) 0x00550055; /* unlock */ - *addr = (FPW) 0x00300030; /* erase sector */ - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 50us for AMD, 80us for Intel. - * Let's wait 1 ms. - */ - udelay(1000); - - while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) { - if ((now = get_timer(0)) - start > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - - if (intel) { - /* suspend erase */ - *addr = (FPW) 0x00B000B0; - } - - flash_reset(info); /* reset to read mode */ - rcode = 1; /* failed */ - break; - } - - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - - flash_reset(info); /* reset to read mode */ - } - - printf(" done\n"); - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int -bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */ - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; - - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof (data), left -= sizeof (data) - bytes) { - - bytes = addr & (sizeof (data) - 1); - addr &= ~(sizeof (data) - 1); - - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof (data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left) - data += *((uchar *) addr + i); - else - data += *src++; - } - - /* write one word to the flash */ - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - res = write_word_amd(info, (FPWV *) addr, data); - break; - case FLASH_MAN_INTEL: - res = write_word_intel(info, (FPWV *) addr, data); - break; - default: - /* unknown flash type, error! */ - printf("missing or unknown FLASH type\n"); - res = 1; /* not really a timeout, but gives error */ - break; - } - } - - return (res); -} - -/** - * write_buf: - Copy memory to flash. - * - * @param info: - * @param src: source of copy transaction - * @param addr: where to copy to - * @param cnt: number of bytes to copy - * - * @return error code - */ - -int -write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int l; - int i, rc; - - wp = (addr & ~1); /* get lower word aligned address */ - - /* handle unaligned start bytes */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - for (; i < 2 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - if ((rc = write_word(info, (FPWV *)wp, data)) != 0) { - return (rc); - } - wp += 2; - } - - /* handle word aligned part */ - while (cnt >= 2) { - /* data = *((vushort*)src); */ - data = *((FPW *) src); - if ((rc = write_word(info, (FPWV *)wp, data)) != 0) { - return (rc); - } - src += sizeof (FPW); - wp += sizeof (FPW); - cnt -= sizeof (FPW); - } - - if (cnt == 0) - return ERR_OK; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - return write_word(info, (FPWV *)wp, data); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for AMD FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int -write_word_amd(flash_info_t * info, FPWV * dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - FPWV *base; /* first address in flash bank */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - base = (FPWV *) (info->start[0]); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - base[0x0555] = (FPW) 0x00AA00AA; /* unlock */ - base[0x02AA] = (FPW) 0x00550055; /* unlock */ - base[0x0555] = (FPW) 0x00A000A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - /* data polling for D7 */ - while (res == 0 - && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) { - if (get_timer(0) - start > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW) 0x00F000F0; /* reset bank */ - printf("SHA timeout\n"); - res = 1; - } - } - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for Intel FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int -write_word_intel(flash_info_t * info, FPWV * dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - *dest = (FPW) 0x00500050; /* clear status register */ - *dest = (FPW) 0x00FF00FF; /* make sure in read mode */ - *dest = (FPW) 0x00400040; /* program setup */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW) 0x00B000B0; /* Suspend program */ - res = 1; - } - } - - if (res == 0 && (*dest & (FPW) 0x00100010)) - res = 1; /* write failed, time out error is close enough */ - - *dest = (FPW) 0x00500050; /* clear status register */ - *dest = (FPW) 0x00FF00FF; /* make sure in read mode */ - - return (res); -} - -#ifdef CONFIG_SYS_FLASH_PROTECTION -/*----------------------------------------------------------------------- - */ -int -flash_real_protect(flash_info_t * info, long sector, int prot) -{ - int rcode = 0; /* assume success */ - FPWV *addr; /* address of sector */ - FPW value; - - addr = (FPWV *) (info->start[sector]); - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F800C3B: - case FLASH_28F800C3T: - case FLASH_28F160C3B: - case FLASH_28F160C3T: - case FLASH_28F320C3B: - case FLASH_28F320C3T: - case FLASH_28F640C3B: - case FLASH_28F640C3T: - flash_reset(info); /* make sure in read mode */ - *addr = (FPW) 0x00600060L; /* lock command setup */ - if (prot) - *addr = (FPW) 0x00010001L; /* lock sector */ - else - *addr = (FPW) 0x00D000D0L; /* unlock sector */ - flash_reset(info); /* reset to read mode */ - - /* now see if it really is locked/unlocked as requested */ - *addr = (FPW) 0x00900090; - /* read sector protection at sector address, (A7 .. A0) = 0x02. - * D0 = 1 for each device if protected. - * If at least one device is protected the sector is marked - * protected, but return failure. Mixed protected and - * unprotected devices within a sector should never happen. - */ - value = addr[2] & (FPW) 0x00010001; - if (value == 0) - info->protect[sector] = 0; - else if (value == (FPW) 0x00010001) - info->protect[sector] = 1; - else { - /* error, mixed protected and unprotected */ - rcode = 1; - info->protect[sector] = 1; - } - if (info->protect[sector] != prot) - rcode = 1; /* failed to protect/unprotect as requested */ - - /* reload all protection bits from hardware for now */ - flash_sync_real_protect(info); - break; - - case FLASH_AM640U: - default: - /* no hardware protect that we support */ - info->protect[sector] = prot; - break; - } - - return rcode; -} -#endif diff --git a/board/mx1fs2/intel.h b/board/mx1fs2/intel.h deleted file mode 100644 index 8db5dd4..0000000 --- a/board/mx1fs2/intel.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (C) 2002 ETC s.r.o. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the ETC s.r.o. nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Written by Marcel Telka marcel@telka.sk, 2002. - * - * Documentation: - * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A, - * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011 - * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18, - * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005 - * - * This file is taken from OpenWinCE project hosted by SourceForge.net - * - */ - -#ifndef FLASH_INTEL_H -#define FLASH_INTEL_H - -#include <common.h> - -/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */ - -#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */ - -/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */ - -#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */ - -/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */ - -#define CFI_CHIP_INTEL_28F320J3A 0x0016 -#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A" -#define CFI_CHIP_INTEL_28F640J3A 0x0017 -#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A" -#define CFI_CHIP_INTEL_28F128J3A 0x0018 -#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A" - -/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */ - -#define CFI_CHIP_INTEL_28F640K3 0x8801 -#define CFI_CHIPN_INTEL_28F640K3 "28F640K3" -#define CFI_CHIP_INTEL_28F128K3 0x8802 -#define CFI_CHIPN_INTEL_28F128K3 "28F128K3" -#define CFI_CHIP_INTEL_28F256K3 0x8803 -#define CFI_CHIPN_INTEL_28F256K3 "28F256K3" -#define CFI_CHIP_INTEL_28F640K18 0x8805 -#define CFI_CHIPN_INTEL_28F640K18 "28F640K18" -#define CFI_CHIP_INTEL_28F128K18 0x8806 -#define CFI_CHIPN_INTEL_28F128K18 "28F128K18" -#define CFI_CHIP_INTEL_28F256K18 0x8807 -#define CFI_CHIPN_INTEL_28F256K18 "28F256K18" - -#endif /* FLASH_INTEL_H */ diff --git a/board/mx1fs2/lowlevel_init.S b/board/mx1fs2/lowlevel_init.S deleted file mode 100644 index 56a4819..0000000 --- a/board/mx1fs2/lowlevel_init.S +++ /dev/null @@ -1,188 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - * 02111-1307, USA. - * - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/imx-regs.h> - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - -/* Change PERCLK1DIV to 14 ie 14+1 */ - ldr r0, =PCDR - ldr r1, =CONFIG_SYS_PCDR_VAL - str r1, [r0] - -/* set MCU PLL Control Register 0 */ - - ldr r0, =MPCTL0 - ldr r1, =CONFIG_SYS_MPCTL0_VAL - str r1, [r0] - -/* set MCU PLL Control Register 1 */ - - ldr r0, =MPCTL1 - ldr r1, =CONFIG_SYS_MPCTL1_VAL - str r1, [r0] - -/* set mpll restart bit */ - ldr r0, =CSCR - ldr r1, [r0] - orr r1,r1,#(1<<21) - str r1, [r0] - - mov r2,#0x10 -1: - mov r3,#0x2000 -2: - subs r3,r3,#1 - bne 2b - - subs r2,r2,#1 - bne 1b - -/* set System PLL Control Register 0 */ - - ldr r0, =SPCTL0 - ldr r1, =CONFIG_SYS_SPCTL0_VAL - str r1, [r0] - -/* set System PLL Control Register 1 */ - - ldr r0, =SPCTL1 - ldr r1, =CONFIG_SYS_SPCTL1_VAL - str r1, [r0] - -/* set spll restart bit */ - ldr r0, =CSCR - ldr r1, [r0] - orr r1,r1,#(1<<22) - str r1, [r0] - - mov r2,#0x10 -1: - mov r3,#0x2000 -2: - subs r3,r3,#1 - bne 2b - - subs r2,r2,#1 - bne 1b - - ldr r0, =CSCR - ldr r1, =CONFIG_SYS_CSCR_VAL - str r1, [r0] - - ldr r0, =GPCR - ldr r1, =CONFIG_SYS_GPCR_VAL - str r1, [r0] - -/* - * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon - * this..... - * - * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15 - * register 1, this stops it using the output of the PLL and thus runs at the - * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never - * use the value set in the CM_OSC registers...regardless of what you set it - * too! Thus, although i thought i was running at 140MHz, i'm actually running - * at 40!.. - * - * Slapping this into my bootloader does the trick... - * - * MRC p15,0,r0,c1,c0,0 ; read core configuration register - * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode - * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration - * register - * - */ - MRC p15,0,r0,c1,c0,0 -/* ORR r0,r0,#0xC0000000 async mode */ -/* ORR r0,r0,#0x40000000 sync mode */ - ORR r0,r0,#0xC0000000 - MCR p15,0,r0,c1,c0,0 - - ldr r0, =GIUS(0) - ldr r1, =CONFIG_SYS_GIUS_A_VAL - str r1, [r0] - - ldr r0, =FMCR - ldr r1, =CONFIG_SYS_FMCR_VAL - str r1, [r0] - - ldr r0, =CS0U - ldr r1, =CONFIG_SYS_CS0U_VAL - str r1, [r0] - - ldr r0, =CS0L - ldr r1, =CONFIG_SYS_CS0L_VAL - str r1, [r0] - - ldr r0, =CS1U - ldr r1, =CONFIG_SYS_CS1U_VAL - str r1, [r0] - - ldr r0, =CS1L - ldr r1, =CONFIG_SYS_CS1L_VAL - str r1, [r0] - - ldr r0, =CS4U - ldr r1, =CONFIG_SYS_CS4U_VAL - str r1, [r0] - - ldr r0, =CS4L - ldr r1, =CONFIG_SYS_CS4L_VAL - str r1, [r0] - - ldr r0, =CS5U - ldr r1, =CONFIG_SYS_CS5U_VAL - str r1, [r0] - - ldr r0, =CS5L - ldr r1, =CONFIG_SYS_CS5L_VAL - str r1, [r0] - -/* SDRAM Setup */ - - ldr r1,=0x00221000 /* adr of SDCTRL0 */ - ldr r0,=0x92120200 - str r0,[r1,#0] /* put in precharge command mode */ - ldr r2,=0x08200000 /* adr for precharge cmd */ - ldr r0,[r2,#0] /* precharge */ - ldr r0,=0xA2120200 - ldr r2,=0x08000000 /* start of SDRAM */ - str r0,[r1,#0] /* put in auto-refresh mode */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,=0xB2120200 - ldr r2,=0x08111800 - str r0,[r1,#0] /* setup for mode register of SDRAM */ - ldr r0,[r2,#0] /* program mode register */ - ldr r0,=0x82124267 - str r0,[r1,#0] /* back to normal operation */ - - mov pc,r10 diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c deleted file mode 100644 index 90a33c2..0000000 --- a/board/mx1fs2/mx1fs2.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/arch/imx-regs.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) - -extern void imx_gpio_mode(int gpio_mode); - -static void logo_init(void) -{ - imx_gpio_mode(PD15_PF_LD0); - imx_gpio_mode(PD16_PF_LD1); - imx_gpio_mode(PD17_PF_LD2); - imx_gpio_mode(PD18_PF_LD3); - imx_gpio_mode(PD19_PF_LD4); - imx_gpio_mode(PD20_PF_LD5); - imx_gpio_mode(PD21_PF_LD6); - imx_gpio_mode(PD22_PF_LD7); - imx_gpio_mode(PD23_PF_LD8); - imx_gpio_mode(PD24_PF_LD9); - imx_gpio_mode(PD25_PF_LD10); - imx_gpio_mode(PD26_PF_LD11); - imx_gpio_mode(PD27_PF_LD12); - imx_gpio_mode(PD28_PF_LD13); - imx_gpio_mode(PD29_PF_LD14); - imx_gpio_mode(PD30_PF_LD15); - imx_gpio_mode(PD14_PF_FLM_VSYNC); - imx_gpio_mode(PD13_PF_LP_HSYNC); - imx_gpio_mode(PD6_PF_LSCLK); - imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_DR); - imx_gpio_mode(PD11_PF_CONTRAST); - imx_gpio_mode(PD10_PF_SPL_SPR); - - LCDC_RMCR = 0x00000000; - LCDC_PCR = PCR_COLOR | PCR_PBSIZ_8 | PCR_BPIX_16 | PCR_PCD(5); - LCDC_HCR = HCR_H_WIDTH(2); - LCDC_VCR = VCR_V_WIDTH(2); - - LCDC_PWMR = 0x00000380; /* contrast to 0x80 middle (is best !!!) */ - LCDC_SSA = 0x10040000; /* image in flash */ - - LCDC_SIZE = SIZE_XMAX(320) | SIZE_YMAX(240); /* screen size */ - - LCDC_VPW = 0x000000A0; /* Virtual Page Width Register */ - LCDC_POS = 0x00000000; /* panning offset 0 (0 pixel offset) */ - - /* disable Cursor */ - LCDC_CPOS = 0x00000000; - - /* fixed burst length */ - LCDC_DMACR = DMACR_BURST | DMACR_HM(8) | DMACR_TM(2); - - /* enable LCD */ - DR(3) |= 0x00001000; - LCDC_RMCR = RMCR_LCDC_EN; - -} - -int -board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_MX1FS2; - gd->bd->bi_boot_params = 0x08000100; -serial_init(); - logo_init(); - return 0; -} - -int -dram_init(void) -{ -#if ( CONFIG_NR_DRAM_BANKS > 0 ) - gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1; - gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE; -#endif - return 0; -} - -/** - * show_boot_progress: - indicate state of the boot process - * - * @param status: Status number - see README for details. - * - */ - -void -show_boot_progress(int status) -{ - /* We use this as a hook to disable serial ports just before booting - * This way we suppress the "uncompressing linux..." message - */ -#ifdef CONFIG_SILENT_CONSOLE - if( status == 8) { - if( getenv("silent") != NULL ) { - *(volatile unsigned long *)0x206080 &= ~1; - *(volatile unsigned long *)0x207080 &= ~1; - } - } -#endif - return; -} diff --git a/boards.cfg b/boards.cfg index 54ff361..39b9199 100644 --- a/boards.cfg +++ b/boards.cfg @@ -63,7 +63,6 @@ kb9202 arm arm920t - - m501sk arm arm920t - - at91rm9200 at91rm9200dk arm arm920t - atmel at91rm9200 mx1ads arm arm920t - - imx -mx1fs2 arm arm920t - - imx scb9328 arm arm920t - - imx cm4008 arm arm920t - - ks8695 cm41xx arm arm920t - - ks8695 diff --git a/doc/README.scrapyard b/doc/README.scrapyard index d6c47fa..85d84d7 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +mx1fs2 arm arm920t - 2011-07-17 lpd7a404 arm lh7a40x - 2011-07-17 edb9301 arm arm920t - 2011-07-17 edb9302 arm arm920t - 2011-07-17 diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h deleted file mode 100644 index ddbc65a..0000000 --- a/include/configs/mx1fs2.h +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */ -#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */ -#define CONFIG_MX1FS2 1 /* on a mx1fs2 board */ -#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ - -/* - * Select serial console configuration - */ -#undef _CONFIG_UART1 /* internal uart 1 */ -#define _CONFIG_UART2 /* internal uart 2 */ -#undef _CONFIG_UART3 /* internal uart 3 */ -#undef _CONFIG_UART4 /* internal uart 4 */ -#undef CONFIG_SILENT_CONSOLE /* use this to disable output */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_JFFS2 - -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_PING -#undef CONFIG_CMD_SOURCE - -/* - * Boot options. Setting delay to -1 stops autostart count down. - */ -#define CONFIG_BOOTDELAY 10 -#define CONFIG_BOOTARGS "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2" -#define CONFIG_BOOTCOMMAND "bootm 10080000" -#define CONFIG_SHOW_BOOT_PROGRESS - -/* - * General options for u-boot. Modify to save memory foot print - */ -#define CONFIG_SYS_LONGHELP /* undef saves memory */ -#define CONFIG_SYS_PROMPT "mx1fs2> " /* prompt string */ -#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */ - -#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */ -#define CONFIG_SYS_MEMTEST_END 0x08F00000 - -#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_BAUDRATE 115200 -/* - * Definitions related to passing arguments to kernel. - */ -#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ -#define CONFIG_INITRD_TAG 1 /* send initrd params */ - -/* - * Malloc pool need to host env + 128 Kb reserve for other allocations. - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) - -#define CONFIG_STACKSIZE (120<<10) /* stack size */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ -#endif - -/* SDRAM Setup Values - * 0x910a8300 Precharge Command CAS 3 - * 0x910a8200 Precharge Command CAS 2 - * - * 0xa10a8300 AutoRefresh Command CAS 3 - * 0xa10a8200 Set AutoRefresh Command CAS 2 - */ -#define PRECHARGE_CMD 0x910a8300 -#define AUTOREFRESH_CMD 0xa10a8300 - -#define BUS32BIT_VERSION -/* - * SDRAM Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ -#define MX1FS2_SDRAM_1 0x08000000 /* SDRAM bank #1 */ -#ifdef BUS32BIT_VERSION -#define MX1FS2_SDRAM_1_SIZE (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */ -#else -#define MX1FS2_SDRAM_1_SIZE (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */ -#endif -/* - * Flash Controller settings - */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */ - -#ifdef BUS32BIT_VERSION -#define MX1FS2_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */ -#define MX1FS2_FLASH_INTERLEAVE 2 /* ... made of 2 chips */ -#define MX1FS2_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank*/ -#define MX1FS2_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */ -#else -#define MX1FS2_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */ -#define MX1FS2_FLASH_INTERLEAVE 1 /* ... made of 1 chip */ -#define MX1FS2_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank*/ -#define MX1FS2_FLASH_SECT_SIZE 0x00010000 /* size of erase sector */ -#endif -#define MX1FS2_FLASH_BASE 0x10000000 /* location of flash memory */ -#define MX1FS2_FLASH_UNLOCK 1 /* perform hw unlock first */ - -/* This should be defined if CFI FLASH device is present. Actually benefit - is not so clear to me. In other words we can provide more informations - to user, but this expects more complex flash handling we do not provide - now.*/ -#undef CONFIG_SYS_FLASH_CFI - -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */ - -#define CONFIG_SYS_FLASH_BASE MX1FS2_FLASH_BASE - -/* - * This is setting for JFFS2 support in u-boot. - * Right now there is no gain for user, but later on booting kernel might be - * possible. Consider using XIP kernel running from flash to save RAM - * footprint. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ - -/* - * JFFS2 partitions - */ -/* No command line, one static partition, whole device */ -/* -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00050000 -*/ - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=mx1fs2-0" - -#ifdef BUS32BIT_VERSION -#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:2m@5m(part0),5m@9m(part1)" -#else -#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:-@320k(jffs2)" -#endif - -/* - * Environment setup. Definitions of monitor location and size with - * definition of environment setup ends up in 2 possibilities. - * 1. Embeded environment - in u-boot code is space for environment - * 2. Environment is read from predefined sector of flash - * Right now we support 2. possiblity, but expecting no env placed - * on mentioned address right now. This also needs to provide whole - * sector for it - for us 256Kb is really waste of memory. U-boot uses - * default env. and until kernel parameters could be sent to kernel - * env. has no sense to us. - */ - -#define CONFIG_SYS_MONITOR_BASE 0x10000000 -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */ -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */ - -/* Setup CS4 and CS5 */ -#define CONFIG_SYS_GIUS_A_VAL 0x0003fffe - -/* - * CSxU_VAL: - * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32 - * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC | - * - * CSxL_VAL: - * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0 - * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN| - */ - -#define CONFIG_SYS_CS0U_VAL 0x00008C00 -#define CONFIG_SYS_CS0L_VAL 0x22222601 -#define CONFIG_SYS_CS1U_VAL 0x00008C00 -#define CONFIG_SYS_CS1L_VAL 0x22222301 -#define CONFIG_SYS_CS4U_VAL 0x00008C00 -#define CONFIG_SYS_CS4L_VAL 0x22222301 -#define CONFIG_SYS_CS5U_VAL 0x00008C00 -#define CONFIG_SYS_CS5L_VAL 0x22222301 - -/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1) - f_ref=16,777MHz - - 0x002a141f: 191,9944MHz - 0x040b2007: 144MHz - 0x042a141f: 96MHz - 0x0811140d: 64MHz - 0x040e200e: 150MHz - 0x00321431: 200MHz - - 0x08001800: 64MHz mit 16er Quarz - 0x04001800: 96MHz mit 16er Quarz - 0x04002400: 144MHz mit 16er Quarz - - 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0 - |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */ - -#define CONFIG_SYS_MPCTL0_VAL 0x07E723AD -#define CONFIG_SYS_MPCTL1_VAL 0x00000040 -#define CONFIG_SYS_PCDR_VAL 0x00010005 -#define CONFIG_SYS_GPCR_VAL 0x00000FFB - -#define USE_16M_OSZI /* If you have one, you want to use it - The internal 32kHz oszillator jitters */ -#ifdef USE_16M_OSZI - -#define CONFIG_SYS_SPCTL0_VAL 0x04001401 -#define CONFIG_SYS_SPCTL1_VAL 0x0C000040 -#define CONFIG_SYS_CSCR_VAL 0x07030003 -#define CONFIG_SYS_CLK_FREQ 16780000 -#define CONFIG_SYSPLL_CLK_FREQ 16000000 - -#else - -#define CONFIG_SYS_SPCTL0_VAL 0x07E716D1 -#define CONFIG_SYS_CSCR_VAL 0x06000003 -#define CONFIG_SYS_CLK_FREQ 16780000 -#define CONFIG_SYSPLL_CLK_FREQ 16780000 - -#endif - -/* - * Well this has to be defined, but on the other hand it is used differently - * one may expect. For instance loadb command do not cares :-) - * So advice is - do not relay on this... - */ -#define CONFIG_SYS_LOAD_ADDR 0x08400000 - -#define CONFIG_SYS_FMCR_VAL 0x00000003 /* Reset Default */ - -/* Bit[0:3] contain PERCLK1DIV for UART 1 - 0x000b00b ->b<- -> 192MHz/12=16MHz - 0x000b00b ->8<- -> 144MHz/09=16MHz - 0x000b00b ->3<- -> 64MHz/4=16MHz */ - -#ifdef _CONFIG_UART1 -#define CONFIG_IMX_SERIAL -#define CONFIG_IMX_SERIAL1 -#elif defined _CONFIG_UART2 -#define CONFIG_IMX_SERIAL -#define CONFIG_IMX_SERIAL2 -#elif defined _CONFIG_UART3 | defined _CONFIG_UART4 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_CLK 3686400 -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_CONS_INDEX 1 -#ifdef _CONFIG_UART3 -#define CONFIG_SYS_NS16550_COM1 0x15000000 -#elif defined _CONFIG_UART4 -#define CONFIG_SYS_NS16550_COM1 0x16000000 -#endif -#endif - -#endif /* __CONFIG_H */

Signed-off-by: Wolfgang Denk wd@denx.de --- MAKEALL | 1 - board/sbc2410x/Makefile | 51 ----- board/sbc2410x/config.mk | 23 -- board/sbc2410x/flash.c | 433 ---------------------------------------- board/sbc2410x/lowlevel_init.S | 163 --------------- board/sbc2410x/sbc2410x.c | 193 ------------------ boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/sbc2410x.h | 220 -------------------- 9 files changed, 1 insertions(+), 1085 deletions(-) delete mode 100644 board/sbc2410x/Makefile delete mode 100644 board/sbc2410x/config.mk delete mode 100644 board/sbc2410x/flash.c delete mode 100644 board/sbc2410x/lowlevel_init.S delete mode 100644 board/sbc2410x/sbc2410x.c delete mode 100644 include/configs/sbc2410x.h

diff --git a/MAKEALL b/MAKEALL index ce987e8..a485b95 100755 --- a/MAKEALL +++ b/MAKEALL @@ -338,7 +338,6 @@ LIST_ARM9=" \ openrd_ultimate \ portl2 \ rd6281a \ - sbc2410x \ scb9328 \ sheevaplug \ smdk2400 \ diff --git a/board/sbc2410x/Makefile b/board/sbc2410x/Makefile deleted file mode 100644 index 2b3b781..0000000 --- a/board/sbc2410x/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := sbc2410x.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/sbc2410x/config.mk b/board/sbc2410x/config.mk deleted file mode 100644 index bc01a2d..0000000 --- a/board/sbc2410x/config.mk +++ /dev/null @@ -1,23 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu -# -# see http://www.samsung.com/ for more information on SAMSUNG -# - -# -# SMDK2410 has 1 bank of 64 MB DRAM -# -# 3000'0000 to 3400'0000 -# -# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -# optionally with a ramdisk at 3080'0000 -# -# we load ourself to 33F8'0000 -# -# download area is 3300'0000 - -CONFIG_SYS_TEXT_BASE = 0x33F80000 diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c deleted file mode 100644 index d209a6f..0000000 --- a/board/sbc2410x/flash.c +++ /dev/null @@ -1,433 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke azu@sysgo.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -ulong myflush (void); - -#define FLASH_BANK_SIZE PHYS_FLASH_SIZE -#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -#define CMD_READ_ARRAY 0x000000F0 -#define CMD_UNLOCK1 0x000000AA -#define CMD_UNLOCK2 0x00000055 -#define CMD_ERASE_SETUP 0x00000080 -#define CMD_ERASE_CONFIRM 0x00000030 -#define CMD_PROGRAM 0x000000A0 -#define CMD_UNLOCK_BYPASS 0x00000020 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1))) - -#define BIT_ERASE_DONE 0x00000080 -#define BIT_RDY_MASK 0x00000080 -#define BIT_PROGRAM_ERROR 0x00000020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - -/*----------------------------------------------------------------------- - */ - -ulong flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = -#if defined(CONFIG_AMD_LV400) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV400B & FLASH_TYPEMASK); -#elif defined(CONFIG_AMD_LV800) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV800B & FLASH_TYPEMASK); -#else -#error "Unknown flash configured" -#endif - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) { - if (j <= 3) { - /* 1st one is 16 KB */ - if (j == 0) { - flash_info[i].start[j] = - flashbase + 0; - } - - /* 2nd and 3rd are both 8 KB */ - if ((j == 1) || (j == 2)) { - flash_info[i].start[j] = - flashbase + 0x4000 + (j - - 1) * - 0x2000; - } - - /* 4th 32 KB */ - if (j == 3) { - flash_info[i].start[j] = - flashbase + 0x8000; - } - } else { - flash_info[i].start[j] = - flashbase + (j - 3) * MAIN_SECT_SIZE; - } - } - size += flash_info[i].size; - } - - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (AMD_MANUFACT & FLASH_VENDMASK): - printf ("AMD: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (AMD_ID_LV400B & FLASH_TYPEMASK): - printf ("1x Amd29LV400BB (4Mbit)\n"); - break; - case (AMD_ID_LV800B & FLASH_TYPEMASK): - printf ("1x Amd29LV800BB (8Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - - Done:; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ushort result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip; - ulong start; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - vu_short *addr = (vu_short *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip = TMO; - break; - } - - if (!chip - && (result & 0xFFFF) & BIT_ERASE_DONE) - chip = READY; - - if (!chip - && (result & 0xFFFF) & BIT_PROGRAM_ERROR) - chip = ERR; - - } while (!chip); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - - outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_hword (flash_info_t * info, ulong dest, ushort data) -{ - vu_short *addr = (vu_short *) dest; - ushort result; - int rc = ERR_OK; - int cflag, iflag; - int chip; - ulong start; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; - *addr = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - get_timer(start); - - /* wait until flash is ready */ - chip = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - chip = ERR | TMO; - break; - } - if (!chip && ((result & 0x80) == (data & 0x80))) - chip = READY; - - if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { - result = *addr; - - if ((result & 0x80) == (data & 0x80)) - chip = READY; - else - chip = ERR; - } - - } while (!chip); - - *addr = CMD_READ_ARRAY; - - if (chip == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - int l; - int i, rc; - ushort data; - - wp = (addr & ~1); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - for (; i < 2 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - if ((rc = write_hword (info, wp, data)) != 0) { - return (rc); - } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - data = *((vu_short *) src); - if ((rc = write_hword (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - return write_hword (info, wp, data); -} diff --git a/board/sbc2410x/lowlevel_init.S b/board/sbc2410x/lowlevel_init.S deleted file mode 100644 index 3de9166..0000000 --- a/board/sbc2410x/lowlevel_init.S +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Modified for the Samsung SMDK2410 by - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * Modified for the friendly-arm SBC-2410X by - * (C) Copyright 2005 - * JinHua Luo, GuangDong Linux Center, luo.jinhua@gd-linux.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -/* - * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S - * - * Copyright (C) 2002 Samsung Electronics SW.LEE hitchcar@sec.samsung.com - */ - -#define BWSCON 0x48000000 - -/* BWSCON */ -#define DW8 (0x0) -#define DW16 (0x1) -#define DW32 (0x2) -#define WAIT (0x1<<2) -#define UBLB (0x1<<3) - -#define B1_BWSCON (DW16) -#define B2_BWSCON (DW16) -#define B3_BWSCON (DW16 + WAIT + UBLB) -#define B4_BWSCON (DW16) -#define B5_BWSCON (DW16) -#define B6_BWSCON (DW32) -#define B7_BWSCON (DW32) - -#define B0_Tacs 0x0 -#define B0_Tcos 0x0 -#define B0_Tacc 0x7 -#define B0_Tcoh 0x0 -#define B0_Tah 0x0 -#define B0_Tacp 0x0 -#define B0_PMC 0x0 - -#define B1_Tacs 0x0 -#define B1_Tcos 0x0 -#define B1_Tacc 0x7 -#define B1_Tcoh 0x0 -#define B1_Tah 0x0 -#define B1_Tacp 0x0 -#define B1_PMC 0x0 - -#define B2_Tacs 0x0 -#define B2_Tcos 0x0 -#define B2_Tacc 0x7 -#define B2_Tcoh 0x0 -#define B2_Tah 0x0 -#define B2_Tacp 0x0 -#define B2_PMC 0x0 - -#define B3_Tacs 0xc -#define B3_Tcos 0x7 -#define B3_Tacc 0xf -#define B3_Tcoh 0x1 -#define B3_Tah 0x0 -#define B3_Tacp 0x0 -#define B3_PMC 0x0 - -#define B4_Tacs 0x0 -#define B4_Tcos 0x0 -#define B4_Tacc 0x7 -#define B4_Tcoh 0x0 -#define B4_Tah 0x0 -#define B4_Tacp 0x0 -#define B4_PMC 0x0 - -#define B5_Tacs 0xc -#define B5_Tcos 0x7 -#define B5_Tacc 0xf -#define B5_Tcoh 0x1 -#define B5_Tah 0x0 -#define B5_Tacp 0x0 -#define B5_PMC 0x0 - -#define B6_MT 0x3 /* SDRAM */ -#define B6_Trcd 0x1 -#define B6_SCAN 0x1 /* 9bit */ - -#define B7_MT 0x3 /* SDRAM */ -#define B7_Trcd 0x1 /* 3clk */ -#define B7_SCAN 0x1 /* 9bit */ - -/* REFRESH parameter */ -#define REFEN 0x1 /* Refresh enable */ -#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -#define Trp 0x0 /* 2clk */ -#define Trc 0x3 /* 7clk */ -#define Tchr 0x2 /* 3clk */ -#define REFCNT 0x0459 -/**************************************/ - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - -.globl lowlevel_init -lowlevel_init: - /* memory control configuration */ - /* make r0 relative the current location so that it */ - /* reads SMRDATA out of FLASH rather than memory ! */ - ldr r0, =SMRDATA - ldr r1, _TEXT_BASE - sub r0, r0, r1 - ldr r1, =BWSCON /* Bus Width Status Controller */ - add r2, r0, #13*4 -0: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r2, r0 - bne 0b - - /* everything is fine now */ - mov pc, lr - - .ltorg -/* the literal pools origin */ - -SMRDATA: - .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) - .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) - .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) - .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) - .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) - .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) - .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) - .word 0xb2 - .word 0x30 - .word 0x30 diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c deleted file mode 100644 index c82382d..0000000 --- a/board/sbc2410x/sbc2410x.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * (C) Copyright 2005 - * JinHua Luo, GuangDong Linux Center, luo.jinhua@gd-linux.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/s3c24x0_cpu.h> - -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#define FCLK_SPEED 1 - -#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ -#define M_MDIV 0xC3 -#define M_PDIV 0x4 -#define M_SDIV 0x1 -#elif FCLK_SPEED==1 /* Fout = 202.8MHz */ -#define M_MDIV 0x5c -#define M_PDIV 0x4 -#define M_SDIV 0x0 -#endif - -#define USB_CLOCK 1 - -#if USB_CLOCK==0 -#define U_M_MDIV 0xA1 -#define U_M_PDIV 0x3 -#define U_M_SDIV 0x1 -#elif USB_CLOCK==1 -#define U_M_MDIV 0x48 -#define U_M_PDIV 0x3 -#define U_M_SDIV 0x2 -#endif - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - struct s3c24x0_clock_power * const clk_power = - s3c24x0_get_base_clock_power(); - struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - - /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->locktime = 0xFFFFFF; - - /* configure MPLL */ - clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); - - /* some delay between MPLL and UPLL */ - delay (4000); - - /* configure UPLL */ - clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); - - /* some delay between MPLL and UPLL */ - delay (8000); - - /* set up the I/O ports */ - gpio->gpacon = 0x007FFFFF; - gpio->gpbcon = 0x00044556; - gpio->gpbup = 0x000007FF; - gpio->gpccon = 0xAAAAAAAA; - gpio->gpcup = 0x0000FFFF; - gpio->gpdcon = 0xAAAAAAAA; - gpio->gpdup = 0x0000FFFF; - gpio->gpecon = 0xAAAAAAAA; - gpio->gpeup = 0x0000FFFF; - gpio->gpfcon = 0x000055AA; - gpio->gpfup = 0x000000FF; - gpio->gpgcon = 0xFF95FF3A; - gpio->gpgup = 0x0000FFFF; - gpio->gphcon = 0x0016FAAA; - gpio->gphup = 0x000007FF; - - gpio->extint0 = 0x22222222; - gpio->extint1 = 0x22222222; - gpio->extint2 = 0x22222222; - - /* arch number of SMDK2410-Board */ - gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x30000100; - - icache_enable(); - dcache_enable(); - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -#if defined(CONFIG_CMD_NAND) -extern ulong nand_probe(ulong physadr); - -static inline void NF_Reset(void) -{ - int i; - - NF_SetCE(NFCE_LOW); - NF_Cmd(0xFF); /* reset command */ - for(i = 0; i < 10; i++); /* tWB = 100ns. */ - NF_WaitRB(); /* wait 200~500us; */ - NF_SetCE(NFCE_HIGH); -} - -static inline void NF_Init(void) -{ -#if 1 -#define TACLS 0 -#define TWRPH0 3 -#define TWRPH1 0 -#else -#define TACLS 0 -#define TWRPH0 4 -#define TWRPH1 2 -#endif - - NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0)); - /*nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0); */ - /* 1 1 1 1, 1 xxx, r xxx, r xxx */ - /* En 512B 4step ECCR nFCE=H tACLS tWRPH0 tWRPH1 */ - - NF_Reset(); -} - -void nand_init(void) -{ - struct s3c2410_nand * const nand = s3c2410_get_base_nand(); - - NF_Init(); -#ifdef DEBUG - printf("NAND flash probing at 0x%.8lX\n", (ulong)nand); -#endif - printf ("%4lu MB\n", nand_probe((ulong)nand) >> 20); -} -#endif - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif diff --git a/boards.cfg b/boards.cfg index 52d3dd9..8a501ae 100644 --- a/boards.cfg +++ b/boards.cfg @@ -66,7 +66,6 @@ mx1ads arm arm920t - - scb9328 arm arm920t - - imx cm4008 arm arm920t - - ks8695 cm41xx arm arm920t - - ks8695 -sbc2410x arm arm920t - - s3c24x0 VCMA9 arm arm920t vcma9 mpl s3c24x0 smdk2400 arm arm920t - samsung s3c24x0 smdk2410 arm arm920t - samsung s3c24x0 diff --git a/doc/README.scrapyard b/doc/README.scrapyard index b169dbe..0c62885 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +sbc2410x arm arm920t - 2011-07-17 netstar arm arm925t - 2011-07-17 mx1fs2 arm arm920t - 2011-07-17 lpd7a404 arm lh7a40x - 2011-07-17 diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h deleted file mode 100644 index f0f19b2..0000000 --- a/include/configs/sbc2410x.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * Gary Jennejohn garyj@denx.de - * David Mueller d.mueller@elsoft.ch - * - * Modified for the friendly-arm SBC-2410X by - * (C) Copyright 2005 - * JinHua Luo, GuangDong Linux Center, luo.jinhua@gd-linux.com - * - * Configuation settings for the friendly-arm SBC-2410X board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#undef CONFIG_SKIP_LOWLEVEL_INIT /* undef for developing */ - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ -#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ -#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000/* the SBC2410X has 12MHz input clock */ - - -#define USE_920T_MMU 1 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NET_MULTI -#define CONFIG_CS8900 /* we have a CS8900 on-board */ -#define CONFIG_CS8900_BASE 0x19000300 -#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */ - -/* - * select serial console configuration - */ -#define CONFIG_S3C24X0_SERIAL -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SBC2410X */ - -/************************************************************ - * RTC - ************************************************************/ -#define CONFIG_RTC_S3C24X0 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs " \ - "nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv " \ - "ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off" -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.0.69 -#define CONFIG_SERVERIP 192.168.0.1 -/*#define CONFIG_BOOTFILE "elinos-lart" */ -#define CONFIG_BOOTCOMMAND "dhcp; bootm" - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "[ ~ljh@GDLC ]# " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x33000000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -/* #define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ */ - -#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ - -#ifdef CONFIG_AMD_LV800 -#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */ -#endif - -#ifdef CONFIG_AMD_LV400 -#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */ -#endif - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * NAND flash settings - */ -#if defined(CONFIG_CMD_NAND) -#define CONFIG_NAND_S3C2410 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#endif /* CONFIG_CMD_NAND */ - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_TAG - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_CMDLINE_EDITING - -#ifdef CONFIG_CMDLINE_EDITING -#undef CONFIG_AUTO_COMPLETE -#else -#define CONFIG_AUTO_COMPLETE -#endif - -#endif /* __CONFIG_H */

Signed-off-by: Wolfgang Denk wd@denx.de --- MAINTAINERS | 2 - MAKEALL | 3 - README | 2 +- board/armltd/versatile/Makefile | 51 ------ board/armltd/versatile/lowlevel_init.S | 34 ---- board/armltd/versatile/split_by_variant.sh | 42 ----- board/armltd/versatile/versatile.c | 111 ------------ doc/README.scrapyard | 1 + include/configs/versatile.h | 252 ---------------------------- 9 files changed, 2 insertions(+), 496 deletions(-) delete mode 100644 board/armltd/versatile/Makefile delete mode 100644 board/armltd/versatile/lowlevel_init.S delete mode 100755 board/armltd/versatile/split_by_variant.sh delete mode 100644 board/armltd/versatile/versatile.c delete mode 100644 include/configs/versatile.h

diff --git a/MAINTAINERS b/MAINTAINERS index 4927d4b..4de0231 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -545,8 +545,6 @@ Unknown / orphaned boards: EVB64260 MPC7xx_74xx

integratorcp various - versatile ARM926EJ-S - versatile ARM926EJ-S

######################################################################### diff --git a/MAKEALL b/MAKEALL index 73a053d..d6d04b7 100755 --- a/MAKEALL +++ b/MAKEALL @@ -346,9 +346,6 @@ LIST_ARM9=" \ spear320 \ spear600 \ VCMA9 \ - versatile \ - versatileab \ - versatilepb \ voiceblue \ davinci_dvevm \ davinci_schmoogie \ diff --git a/README b/README index 0886987..d3bcb14 100644 --- a/README +++ b/README @@ -532,7 +532,7 @@ The following options need to be configured:

If you have Amba PrimeCell PL010 or PL011 UARTs on your board, define this to a list of base addresses for each (supported) - port. See e.g. include/configs/versatile.h + port.

CONFIG_PL011_SERIAL_RLCR

diff --git a/board/armltd/versatile/Makefile b/board/armltd/versatile/Makefile deleted file mode 100644 index 3470328..0000000 --- a/board/armltd/versatile/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := versatile.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/armltd/versatile/lowlevel_init.S b/board/armltd/versatile/lowlevel_init.S deleted file mode 100644 index bdfce2d..0000000 --- a/board/armltd/versatile/lowlevel_init.S +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003, ARM Ltd. - * Philippe Robin, philippe.robin@arm.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -/* Set up the platform, once the cpu has been initialized */ -.globl lowlevel_init -lowlevel_init: - - /* All done by Versatile's boot monitor! */ - mov pc, lr diff --git a/board/armltd/versatile/split_by_variant.sh b/board/armltd/versatile/split_by_variant.sh deleted file mode 100755 index 475e5a3..0000000 --- a/board/armltd/versatile/split_by_variant.sh +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/sh -# --------------------------------------------------------- -# Set the core module defines according to Core Module -# --------------------------------------------------------- -# --------------------------------------------------------- -# Set up the Versatile type define -# --------------------------------------------------------- - -mkdir -p ${obj}include -variant=PB926EJ-S -if [ "$1" = "" ] -then - echo "$0:: No parameters - using versatilepb_config" - echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h - variant=PB926EJ-S -else - case "$1" in - versatilepb_config | \ - versatile_config) - echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h - ;; - - versatileab_config) - echo "#define CONFIG_ARCH_VERSATILE_AB" > ${obj}include/config.h - variant=AB926EJ-S - ;; - - - *) - echo "$0:: Unrecognised config - using versatilepb_config" - echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h - variant=PB926EJ-S - ;; - - esac - -fi -# --------------------------------------------------------- -# Complete the configuration -# --------------------------------------------------------- -$MKCONFIG -a versatile arm arm926ejs versatile armltd versatile -echo "Variant:: $variant" diff --git a/board/armltd/versatile/versatile.c b/board/armltd/versatile/versatile.c deleted file mode 100644 index ee8cb5e..0000000 --- a/board/armltd/versatile/versatile.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta Kshitij@ti.com - * - * (C) Copyright 2004 - * ARM Ltd. - * Philippe Robin, philippe.robin@arm.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_SHOW_BOOT_PROGRESS) -void show_boot_progress(int progress) -{ - printf("Boot reached stage %d\n", progress); -} -#endif - -#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF) - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_early_init_f (void) -{ - /* - * set clock frequency: - * VERSATILE_REFCLK is 32KHz - * VERSATILE_TIMCLK is 1MHz - */ - *(volatile unsigned int *)(VERSATILE_SCTL_BASE) |= - ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel)); - - return 0; -} - -int board_init (void) -{ - /* arch number of Versatile Board */ - gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_PB; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - gd->flags = 0; - - icache_enable (); - - return 0; -} - - -int misc_init_r (void) -{ - setenv("verify", "n"); - return (0); -} - -/****************************** - Routine: - Description: -******************************/ -int dram_init (void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 19bd1d6..087e0e1 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +versatile arm ARM926EJS - 2011-07-17 Peter Pearse peter.pearse@arm.com smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn garyj@denx.de sbc2410x arm arm920t - 2011-07-17 netstar arm arm925t - 2011-07-17 diff --git a/include/configs/versatile.h b/include/configs/versatile.h deleted file mode 100644 index 32cee82..0000000 --- a/include/configs/versatile.h +++ /dev/null @@ -1,252 +0,0 @@ -/* - * (C) Copyright 2003 - * Texas Instruments. - * Kshitij Gupta kshitij@ti.com - * Configuation settings for the TI OMAP Innovator board. - * - * (C) Copyright 2004 - * ARM Ltd. - * Philippe Robin, philippe.robin@arm.com - * Configuration for Versatile PB. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ -#define CONFIG_VERSATILE 1 /* in Versatile Platform Board */ -#define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */ - -#ifndef CONFIG_ARCH_VERSATILE_AB /* AB */ -#define CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */ -#endif - -#define CONFIG_SYS_MEMTEST_START 0x100000 -#define CONFIG_SYS_MEMTEST_END 0x10000000 -#define CONFIG_SYS_HZ (1000000 / 256) -#define CONFIG_SYS_TIMERBASE 0x101E2000 /* Timer 0 and 1 base */ - -#define CONFIG_SYS_TIMER_INTERVAL 10000 -#define CONFIG_SYS_TIMER_RELOAD (CONFIG_SYS_TIMER_INTERVAL >> 4) -#define CONFIG_SYS_TIMER_CTRL 0x84 /* Enable, Clock / 16 */ - -/* - * control registers - */ -#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ - -/* - * System controller bit assignment - */ -#define VERSATILE_REFCLK 0 -#define VERSATILE_TIMCLK 1 - -#define VERSATILE_TIMER1_EnSel 15 -#define VERSATILE_TIMER2_EnSel 17 -#define VERSATILE_TIMER3_EnSel 19 -#define VERSATILE_TIMER4_EnSel 21 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_MISC_INIT_R 1 -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE 8192 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC_USE_32_BIT -#define CONFIG_SMC91111_BASE 0x10010000 -#undef CONFIG_SMC91111_EXT_PHY - -/* - * NS16550 Configuration - */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_CLOCK 24000000 -#define CONFIG_PL01x_PORTS \ - {(void *)CONFIG_SYS_SERIAL0, \ - (void *)CONFIG_SYS_SERIAL1 } -#define CONFIG_CONS_INDEX 0 - -#define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_SYS_SERIAL0 0x101F1000 -#define CONFIG_SYS_SERIAL1 0x101F2000 - -/* - * Command line configuration. - */ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_SUBNETMASK - -#define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp "\ - "netdev=25,0,0xf1010000,0xf1010010,eth0" - -/* - * Static configuration when assigning fixed address - */ -#define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Monitor Command Prompt */ -#ifdef CONFIG_ARCH_VERSATILE_AB -# define CONFIG_SYS_PROMPT "VersatileAB # " -#else -# define CONFIG_SYS_PROMPT "VersatilePB # " -#endif -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x00800000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_GBL_DATA_OFFSET) - -#define CONFIG_BOARD_EARLY_INIT_F - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#ifdef CONFIG_ARCH_VERSATILE_QEMU -#define CONFIG_SYS_TEXT_BASE 0x10000 -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_MONITOR_LEN 0x80000 -#else -#define CONFIG_SYS_TEXT_BASE 0x01000000 -/* - * Use the CFI flash driver for ease of use - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_ENV_IS_IN_FLASH 1 -/* - * System control register - */ -#define VERSATILE_SYS_BASE 0x10000000 -#define VERSATILE_SYS_FLASH_OFFSET 0x4C -#define VERSATILE_FLASHCTRL \ - (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET) -/* Enable writing to flash */ -#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */ - -/* - * Note that CONFIG_SYS_MAX_FLASH_SECT allows for a parameter block - * i.e. - * the bottom "sector" (bottom boot), or top "sector" - * (top boot), is a seperate erase region divided into - * 4 (equal) smaller sectors. This, notionally, allows - * quicker erase/rewrire of the most frequently changed - * area...... - * CONFIG_SYS_MAX_FLASH_SECT is padded up to a multiple of 4 - */ - -#ifdef CONFIG_ARCH_VERSATILE_AB -#define FLASH_SECTOR_SIZE 0x00020000 /* 128 KB sectors */ -#define CONFIG_ENV_SECT_SIZE (2 * FLASH_SECTOR_SIZE) -#define CONFIG_SYS_MAX_FLASH_SECT (520) -#endif - -#ifdef CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */ -#define FLASH_SECTOR_SIZE 0x00040000 /* 256 KB sectors */ -#define CONFIG_ENV_SECT_SIZE FLASH_SECTOR_SIZE -#define CONFIG_SYS_MAX_FLASH_SECT (260) -#endif - -#define CONFIG_SYS_FLASH_BASE 0x34000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -#define CONFIG_SYS_MONITOR_LEN (4 * CONFIG_ENV_SECT_SIZE) - -/* The ARM Boot Monitor is shipped in the lowest sector of flash */ - -#define FLASH_TOP (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE) -#define CONFIG_ENV_ADDR (FLASH_TOP - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN) - -#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ - -#endif - -#endif /* __CONFIG_H */

Signed-off-by: Wolfgang Denk wd@denx.de --- MAKEALL | 1 - board/voiceblue/Makefile | 74 ----------- board/voiceblue/config.mk | 1 - board/voiceblue/eeprom.c | 218 --------------------------------- board/voiceblue/setup.S | 280 ------------------------------------------- board/voiceblue/voiceblue.c | 80 ------------ boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/voiceblue.h | 241 ------------------------------------- 9 files changed, 1 insertions(+), 896 deletions(-) delete mode 100644 board/voiceblue/Makefile delete mode 100644 board/voiceblue/config.mk delete mode 100644 board/voiceblue/eeprom.c delete mode 100644 board/voiceblue/setup.S delete mode 100644 board/voiceblue/voiceblue.c delete mode 100644 include/configs/voiceblue.h

diff --git a/MAKEALL b/MAKEALL index d6d04b7..b230ff1 100755 --- a/MAKEALL +++ b/MAKEALL @@ -346,7 +346,6 @@ LIST_ARM9=" \ spear320 \ spear600 \ VCMA9 \ - voiceblue \ davinci_dvevm \ davinci_schmoogie \ davinci_sffsdr \ diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile deleted file mode 100644 index e16b195..0000000 --- a/board/voiceblue/Makefile +++ /dev/null @@ -1,74 +0,0 @@ -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de -# -# (C) Copyright 2005 -# Ladislav Michl, 2N Telekomunikace, michl@2n.cz -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License version 2 as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := voiceblue.o -SOBJS := setup.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -LOAD_ADDR = 0x10400000 - -######################################################################### - -all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin - -$(LIB): $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $^) - -$(obj)eeprom_start.o: - echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ - - -$(obj)eeprom: $(obj)eeprom_start.o $(obj)eeprom.o - $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \ - -L$(obj)../../examples/standalone -lstubs \ - $(PLATFORM_LIBS) - -$(obj)eeprom.srec: $(obj)eeprom - $(OBJCOPY) -S -O srec $(<:.o=) $@ - -$(obj)eeprom.bin: $(obj)eeprom - $(OBJCOPY) -S -O binary $< $@ - -clean: - rm -f $(SOBJS) $(OBJS) $(obj)eeprom \ - $(obj)eeprom.srec $(obj)eeprom.bin \ - $(obj)eeprom.o $(obj)eeprom_start.o - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk deleted file mode 100644 index 412b57d..0000000 --- a/board/voiceblue/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x13FD0000 diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c deleted file mode 100644 index aa6baca..0000000 --- a/board/voiceblue/eeprom.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * (C) Copyright 2005 - * Ladislav Michl, 2N Telekomunikace, michl@2n.cz - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Some code shamelessly stolen back from Robin Getz. - */ - -#include <common.h> -#include <exports.h> -#include <timestamp.h> -#include <net.h> -#include "../drivers/net/smc91111.h" - -static struct eth_device dev = { - .iobase = CONFIG_SMC91111_BASE -}; - -static u16 read_eeprom_reg(u16 reg) -{ - int timeout; - - SMC_SELECT_BANK(&dev, 2); - SMC_outw(&dev, reg, PTR_REG); - - SMC_SELECT_BANK(&dev, 1); - SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT | - CTL_RELOAD, CTL_REG); - - timeout = 100; - - while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout) - udelay(100); - if (timeout == 0) { - printf("Timeout reading register %02x\n", reg); - return 0; - } - - return SMC_inw(&dev, GP_REG); -} - -static int write_eeprom_reg(u16 value, u16 reg) -{ - int timeout; - - SMC_SELECT_BANK(&dev, 2); - SMC_outw(&dev, reg, PTR_REG); - - SMC_SELECT_BANK(&dev, 1); - - SMC_outw(&dev, value, GP_REG); - SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT | - CTL_STORE, CTL_REG); - - timeout = 100; - - while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout) - udelay(100); - if (timeout == 0) { - printf("Timeout writing register %02x\n", reg); - return 0; - } - - return 1; -} - -static int write_data(u16 *buf, int len) -{ - u16 reg = 0x23; - - while (len--) - write_eeprom_reg(*buf++, reg++); - - return 0; -} - -static int verify_macaddr(char *s) -{ - u16 reg; - int i, err = 0; - - puts("HWaddr: "); - for (i = 0; i < 3; i++) { - reg = read_eeprom_reg(0x20 + i); - printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n'); - if (s) - err |= reg != ((u16 *)s)[i]; - } - - return err ? 0 : 1; -} - -static int set_mac(char *s) -{ - int i; - char *e, eaddr[6]; - - /* turn string into mac value */ - for (i = 0; i < 6; i++) { - eaddr[i] = simple_strtoul(s, &e, 16); - s = (*e) ? e+1 : e; - } - - for (i = 0; i < 3; i++) - write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i); - - return 0; -} - -static int parse_element(char *s, unsigned char *buf, int len) -{ - int cnt; - char *p, num[3]; - unsigned char id; - - id = simple_strtoul(s, &p, 16); - if (*p++ != ':') - return -1; - cnt = 2; - num[2] = 0; - for (; *p; p += 2) { - if (p[1] == 0) - return -2; - if (cnt + 3 > len) - return -3; - num[0] = p[0]; - num[1] = p[1]; - buf[cnt++] = simple_strtoul(num, NULL, 16); - } - buf[0] = id; - buf[1] = cnt - 2; - - return cnt; -} - -int eeprom(int argc, char * const argv[]) -{ - int i, len, ret; - unsigned char buf[58], *p; - - app_startup(argv); - i = get_version(); - if (i != XF_VERSION) { - printf("Using ABI version %d, but U-Boot provides %d\n", - XF_VERSION, i); - return 1; - } - - if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) { - puts("SMSC91111 not found\n"); - return 2; - } - - /* Called without parameters - print MAC address */ - if (argc < 2) { - verify_macaddr(NULL); - return 0; - } - - /* Print help message */ - if (argv[1][1] == 'h') { - puts("VoiceBlue EEPROM writer\n" - "Built: " U_BOOT_DATE " at " U_BOOT_TIME "\n" - "Usage:\n\t<mac_address> [<element_1>] [<...>]\n"); - return 0; - } - - /* Try to parse information elements */ - len = sizeof(buf); - p = buf; - for (i = 2; i < argc; i++) { - ret = parse_element(argv[i], p, len); - switch (ret) { - case -1: - printf("Element %d: malformed\n", i - 1); - return 3; - case -2: - printf("Element %d: odd character count\n", i - 1); - return 3; - case -3: - puts("Out of EEPROM memory\n"); - return 3; - default: - p += ret; - len -= ret; - } - } - - /* First argument (MAC) is mandatory */ - set_mac(argv[1]); - if (verify_macaddr(argv[1])) { - puts("*** HWaddr does not match! ***\n"); - return 4; - } - - while (len--) - *p++ = 0; - - write_data((u16 *)buf, sizeof(buf) >> 1); - - return 0; -} diff --git a/board/voiceblue/setup.S b/board/voiceblue/setup.S deleted file mode 100644 index 6dddd6b..0000000 --- a/board/voiceblue/setup.S +++ /dev/null @@ -1,280 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2004 Ales Jindra jindra@2n.cz - * (C) Copyright 2005 Ladislav Michl michl@2n.cz - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */ - -OMAP5910_LPG1_BASE: .word 0xfffbd000 -OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800 -OMAP5910_MPU_TC_BASE: .word 0xfffecc00 -OMAP5910_MPU_CLKM_BASE: .word 0xfffece00 -OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800 -OMAP5910_DPLL1_BASE: .word 0xfffecf00 -OMAP5910_GPIO_BASE: .word 0xfffce000 -OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800 -OMAP5910_MPUI_BASE: .word 0xfffec900 - -_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL -_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK - -OMAP5910_MPUI_CTRL: .word 0x0000ff1b - -VAL_EMIFS_CS0_CONFIG: .word 0x00009090 -VAL_EMIFS_CS1_CONFIG: .word 0x00003031 -VAL_EMIFS_CS2_CONFIG: .word 0x00003031 -VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0 -VAL_EMIFS_DYN_WAIT: .word 0x00000000 -/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */ - /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */ -VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27)) -VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003 -VAL_EMIFF_MRS: .word 0x00000037 - -/* - * GPIO04 - D4 (Onboard LED) - * GPIO07 - LAN91C111 reset - */ -GPIO_DIRECTION: - .word 0x0000ff6f -/* - * Disable everything, but D4 LED (connected through invertor) - */ -GPIO_OUTPUT: - .word 0x00000010 - -MUX_CONFIG_BASE: - .word 0xfffe1000 - -MUX_CONFIG_VALUES: - .align 4 - .word 0x00000000 @ FUNC_MUX_CTRL_0 - .word 0x00000000 @ FUNC_MUX_CTRL_1 - .word 0x00000000 @ FUNC_MUX_CTRL_2 - .word 0x00000000 @ FUNC_MUX_CTRL_3 - .word 0x00000000 @ FUNC_MUX_CTRL_4 - .word 0x12082480 @ FUNC_MUX_CTRL_5 - .word 0x0000001c @ FUNC_MUX_CTRL_6 - .word 0x00000003 @ FUNC_MUX_CTRL_7 - .word 0x10001200 @ FUNC_MUX_CTRL_8 - .word 0x01201012 @ FUNC_MUX_CTRL_9 - .word 0x02081248 @ FUNC_MUX_CTRL_A - .word 0x00001248 @ FUNC_MUX_CTRL_B - .word 0x12240000 @ FUNC_MUX_CTRL_C - .word 0x00002000 @ FUNC_MUX_CTRL_D - .word 0x00000000 @ PULL_DWN_CTRL_0 - .word 0x0000085f @ PULL_DWN_CTRL_1 - .word 0x01001000 @ PULL_DWN_CTRL_2 - .word 0x00000000 @ PULL_DWN_CTRL_3 - .word 0x00000000 @ GATE_INH_CTRL_0 - .word 0x00000000 @ VOLTAGE_CTRL_0 - .word 0x00000000 @ TEST_DBG_CTRL_0 - .word 0x00000006 @ MOD_CONF_CTRL_0 - .word 0x0000eaef @ COMP_MODE_CTRL_0 - -MUX_CONFIG_OFFSETS: - .align 1 - .byte 0x00 @ FUNC_MUX_CTRL_0 - .byte 0x04 @ FUNC_MUX_CTRL_1 - .byte 0x08 @ FUNC_MUX_CTRL_2 - .byte 0x10 @ FUNC_MUX_CTRL_3 - .byte 0x14 @ FUNC_MUX_CTRL_4 - .byte 0x18 @ FUNC_MUX_CTRL_5 - .byte 0x1c @ FUNC_MUX_CTRL_6 - .byte 0x20 @ FUNC_MUX_CTRL_7 - .byte 0x24 @ FUNC_MUX_CTRL_8 - .byte 0x28 @ FUNC_MUX_CTRL_9 - .byte 0x2c @ FUNC_MUX_CTRL_A - .byte 0x30 @ FUNC_MUX_CTRL_B - .byte 0x34 @ FUNC_MUX_CTRL_C - .byte 0x38 @ FUNC_MUX_CTRL_D - .byte 0x40 @ PULL_DWN_CTRL_0 - .byte 0x44 @ PULL_DWN_CTRL_1 - .byte 0x48 @ PULL_DWN_CTRL_2 - .byte 0x4c @ PULL_DWN_CTRL_3 - .byte 0x50 @ GATE_INH_CTRL_0 - .byte 0x60 @ VOLTAGE_CTRL_0 - .byte 0x70 @ TEST_DBG_CTRL_0 - .byte 0x80 @ MOD_CONF_CTRL_0 - .byte 0x0c @ COMP_MODE_CTRL_0 - .byte 0xff - -.globl lowlevel_init -lowlevel_init: - /* Improve performance a bit... */ - mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register - mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register - mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register - orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000 - mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register - mov r1, #0x00 - mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache - nop - nop - nop - nop - - /* Setup clocking mode */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ prepare base of CLOCK unit - ldrh r1, [r0, #0x18] @ get reset status - bic r1, r1, #(7 << 11) @ clear clock select - orr r1, r1, #(2 << 11) @ set synchronous scalable - mov r2, #0 @ set wait counter to 100 clock cycles - -icache_loop: - cmp r2, #0x01 - streqh r1, [r0, #0x18] - add r2, r2, #0x01 - cmp r2, #0x10 - bne icache_loop - nop - - /* Setup clock divisors */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit - ldr r1, _OMAP5910_ARM_CKCTL - orr r1, r1, #0x2000 @ enable DSP clock - strh r1, [r0, #0x00] @ setup clock divisors - - /* Setup DPLL to generate requested freq */ - ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register - mov r1, #0x0010 @ set PLL_ENABLE - orr r1, r1, #0x2000 @ set IOB to new locking - orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF - orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF - strh r1, [r0] @ write - -locking: - ldrh r1, [r0] @ get DPLL value - tst r1, #0x01 - beq locking @ while LOCK not set - - /* Enable clock */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit - mov r1, #(1 << 10) @ disable idle mode do not check - @ nWAKEUP pin, other remain active - strh r1, [r0, #0x04] - ldr r1, _OMAP5910_ARM_EN_CLK - strh r1, [r0, #0x08] - mov r1, #0x003f @ FLASH.RP not enabled in idle and - @ max delayed ( 32 x CLKIN ) - strh r1, [r0, #0x0c] - - /* Configure 5910 pins functions to match our board. */ - ldr r0, MUX_CONFIG_BASE - adr r1, MUX_CONFIG_VALUES - adr r2, MUX_CONFIG_OFFSETS -next_mux_cfg: - ldrb r3, [r2], #1 - ldr r4, [r1], #4 - cmp r3, #0xff - strne r4, [r0, r3] - bne next_mux_cfg - - /* Configure GPIO pins (also enables onboard LED) */ - ldr r0, OMAP5910_GPIO_BASE - ldr r1, GPIO_OUTPUT - strh r1, [r0, #0x04] - ldr r1, GPIO_DIRECTION - strh r1, [r0, #0x08] - - /* EnablePeripherals */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit - mov r1, #0x0001 @ Peripheral enable - strh r1, [r0, #0x14] - - /* Program LED Pulse Generator */ - ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator - mov r1, #0x7F @ Set obscure frequency in - strb r1, [r0, #0x00] @ LCR - mov r1, #0x01 @ Enable clock (CLK_EN) in - strb r1, [r0, #0x04] @ PMR - - /* TIPB Lock UART1 */ - ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches - mov r1, #1 @ ARM allocated - strh r1, [r0,#0x04] @ clear IRQ line and status bits - strh r1, [r0,#0x00] - ldrh r1, [r0,#0x04] - - /* Disable watchdog */ - ldr r0, OMAP5910_MPU_WD_TIMER_BASE - mov r1, #0xf5 - strh r1, [r0, #0x8] - mov r1, #0xa0 - strh r1, [r0, #0x8] - - /* Enable MCLK */ - ldr r0, OMAP5910_ULPD_PWR_MNG_BASE - mov r1, #0x6 - strh r1, [r0, #0x34] - strh r1, [r0, #0x34] - - /* Setup clock divisors */ - ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register - - mov r1, #0x0010 @ set PLL_ENABLE - orr r1, r1, #0x2000 @ set IOB to new locking - strh r1, [r0] @ write - -ulocking: - ldrh r1, [r0] @ get DPLL value - tst r1, #1 - beq ulocking @ while LOCK not set - - /* EMIF init */ - ldr r0, OMAP5910_MPU_TC_BASE - ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG - bic r1, r1, #0x0c @ pwr down disabled, flash WP - orr r1, r1, #0x01 - str r1, [r0, #0x0c] - - ldr r1, VAL_EMIFS_CS0_CONFIG - str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG - ldr r1, VAL_EMIFS_CS1_CONFIG - str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG - ldr r1, VAL_EMIFS_CS2_CONFIG - str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG - ldr r1, VAL_EMIFS_CS3_CONFIG - str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG - ldr r1, VAL_EMIFS_DYN_WAIT - str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT - - /* Setup SDRAM */ - ldr r1, VAL_EMIFF_SDRAM_CONFIG - str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG - ldr r1, VAL_EMIFF_SDRAM_CONFIG2 - str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2 - ldr r1, VAL_EMIFF_MRS - str r1, [r0, #0x24] @ EMIFF_MRS - /* SDRAM needs 100us to stabilize */ - mov r0, #0x4000 -sdelay: - subs r0, r0, #0x1 - bne sdelay - - /* back to arch calling code */ - mov pc, lr -.end diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c deleted file mode 100644 index 5f8af2b..0000000 --- a/board/voiceblue/voiceblue.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa; - - /* arch number of VoiceBlue board */ - gd->bd->bi_arch_number = MACH_TYPE_VOICEBLUE; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - - return 0; -} - -int dram_init(void) -{ - *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff; - - /* Take the Ethernet controller out of reset and wait - * for the EEPROM load to complete. */ - *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80; - udelay(10); /* doesn't work before timer_init call */ - *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80; - udelay(500); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -int misc_init_r(void) -{ - *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0x55; - - return 0; -} - -int board_late_init(void) -{ - *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0x00; - - return 0; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/boards.cfg b/boards.cfg index f70afe2..b4d82db 100644 --- a/boards.cfg +++ b/boards.cfg @@ -68,7 +68,6 @@ cm4008 arm arm920t - - cm41xx arm arm920t - - ks8695 VCMA9 arm arm920t vcma9 mpl s3c24x0 smdk2410 arm arm920t - samsung s3c24x0 -voiceblue arm arm925t omap1510inn arm arm925t - ti integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 087e0e1..144edaa 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +voiceblue arm arm925t - 2011-07-17 versatile arm ARM926EJS - 2011-07-17 Peter Pearse peter.pearse@arm.com smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn garyj@denx.de sbc2410x arm arm920t - 2011-07-17 diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h deleted file mode 100644 index c258030..0000000 --- a/include/configs/voiceblue.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl - * - * Configuation settings for the TI OMAP VoiceBlue board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/omap1510.h> - -#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP1510 1 /* which is in a 5910 */ - -/* Input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */ -#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -#define CONFIG_MISC_INIT_R /* There is nothing to really init */ -#define BOARD_LATE_INIT /* but we flash the LEDs here */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x10000000 -#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024) -#define PHYS_FLASH_1 0x0000000 - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_SECT_SIZE (64 * 1024) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_OVERWRITE - -/* - * Size of malloc() pool and stack - */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_STACKSIZE (1 * 1024 * 1024) - -/* - * Hardware drivers - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) -#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE - -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x08000300 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP1510_I2C - -#define CONFIG_RTC_DS1307 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - - -/* - * Command line configuration - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - -#define CONFIG_LOOPW - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ -#define CONFIG_SYS_AUTOLOAD "n" -#define CONFIG_BOOTCOMMAND "run nboot" -#define CONFIG_PREBOOT "run setup" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "silent=1\0" \ - "ospart=0\0" \ - "bootfile=/boot/uImage\0" \ - "setpart=" \ - "if test -n $swapos; then " \ - "setenv swapos; saveenv; " \ - "if test $ospart -eq 0; then " \ - "setenv ospart 1; " \ - "else " \ - "setenv ospart 0; " \ - "fi; " \ - "fi\0" \ - "setup=setenv bootargs console=ttyS0,$baudrate " \ - "mtdparts=$mtdparts\0" \ - "nfsargs=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ - "nfsroot=$rootpath root=/dev/nfs\0" \ - "flashargs=run setpart; setenv bootargs $bootargs " \ - "root=mtd:data$ospart ro " \ - "rootfstype=jffs2\0" \ - "initrdargs=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ - "fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \ - "mboot=bootp; run initrdargs; tftp; bootm\0" \ - "nboot=bootp; run nfsargs; tftp; bootm\0" - -#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ - -#if 1 /* feel free to disable for development */ -#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nVoiceBlue Enterprise - booting...\n" -#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */ -#endif - -/* - * Partitions (mtdparts command line support) - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=physmap-flash.0" -#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ - "256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "# " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \ - (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)) -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000) - -/* - * The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. - * This time is further subdivided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ 1000 - -#define OMAP5910_DPLL_DIV 1 -#define OMAP5910_DPLL_MUL \ - ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) - -#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */ -#define OMAP5910_LCD_DIV 2 /* CKL/4 */ -#define OMAP5910_ARM_DIV 0 /* CKL/1 */ -#define OMAP5910_DSP_DIV 0 /* CKL/1 */ -#define OMAP5910_TC_DIV 1 /* CKL/2 */ -#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */ -#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */ - -#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */ -#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \ - (OMAP5910_LCD_DIV << 2) | \ - (OMAP5910_ARM_DIV << 4) | \ - (OMAP5910_DSP_DIV << 6) | \ - (OMAP5910_TC_DIV << 8) | \ - (OMAP5910_DSP_MMU_DIV << 10) | \ - (OMAP5910_ARM_TIM_SEL << 12)) - -#define VOICEBLUE_LED_REG 0x04030000 - -#endif /* __CONFIG_H */

Signed-off-by: Wolfgang Denk wd@denx.de --- board/cmc_pu2/Makefile | 50 ---- board/cmc_pu2/cmc_pu2.c | 192 -------------- board/cmc_pu2/config.mk | 3 - board/cmc_pu2/flash.c | 469 ----------------------------------- board/cmc_pu2/load_sernum_ethaddr.c | 113 --------- boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/cmc_pu2.h | 238 ------------------ 8 files changed, 1 insertions(+), 1066 deletions(-) delete mode 100644 board/cmc_pu2/Makefile delete mode 100644 board/cmc_pu2/cmc_pu2.c delete mode 100644 board/cmc_pu2/config.mk delete mode 100644 board/cmc_pu2/flash.c delete mode 100644 board/cmc_pu2/load_sernum_ethaddr.c delete mode 100644 include/configs/cmc_pu2.h

diff --git a/board/cmc_pu2/Makefile b/board/cmc_pu2/Makefile deleted file mode 100644 index a60f2e9..0000000 --- a/board/cmc_pu2/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := cmc_pu2.o flash.o load_sernum_ethaddr.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c deleted file mode 100644 index 0ac851c..0000000 --- a/board/cmc_pu2/cmc_pu2.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * Modified for CMC_PU2 (removed Smart Media support) by Gary Jennejohn - * (2004) garyj@denx.de - * - * Modified for CMC_BASIC by Martin Krause (2005), TQ-Systems GmbH - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/mach-types.h> -#include <asm/arch/AT91RM9200.h> -#include <asm/io.h> -#include <netdev.h> -#if defined(CONFIG_DRIVER_ETHER) -#include <at91rm9200_net.h> -#include <dm9161.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ -#define CMC_HP_BASIC 1 -#define CMC_PU2 2 -#define CMC_BASIC 4 - -int hw_detect (void); - -int board_init (void) -{ - AT91PS_PIO piob = AT91C_BASE_PIOB; - AT91PS_PIO pioc = AT91C_BASE_PIOC; - - /* Enable Ctrlc */ - console_init_f (); - - /* Correct IRDA resistor problem */ - /* Set PA23_TXD in Output */ - /* (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; */ - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* PIOB and PIOC clock enabling */ - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB; - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC; - - /* - * configure PC0-PC3 as input without pull ups, so RS485 driver enable - * (CMC-PU2) and digital outputs (CMC-BASIC) are deactivated. - */ - pioc->PIO_ODR = AT91C_PIO_PC0 | AT91C_PIO_PC1 | - AT91C_PIO_PC2 | AT91C_PIO_PC3; - pioc->PIO_PPUDR = AT91C_PIO_PC0 | AT91C_PIO_PC1 | - AT91C_PIO_PC2 | AT91C_PIO_PC3; - pioc->PIO_PER = AT91C_PIO_PC0 | AT91C_PIO_PC1 | - AT91C_PIO_PC2 | AT91C_PIO_PC3; - - /* - * On CMC-PU2 board configure PB3-PB6 to input without pull ups to - * clear the duo LEDs (the external pull downs assure a proper - * signal). On CMC-BASIC and CMC-HP-BASIC set PB3-PB6 to output and - * drive it high, to configure current measurement on AINx. - */ - if (hw_detect() & CMC_PU2) { - piob->PIO_ODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 | - AT91C_PIO_PB5 | AT91C_PIO_PB6; - } - else if ((hw_detect() & CMC_BASIC) || (hw_detect() & CMC_HP_BASIC)) { - piob->PIO_SODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 | - AT91C_PIO_PB5 | AT91C_PIO_PB6; - piob->PIO_OER = AT91C_PIO_PB3 | AT91C_PIO_PB4 | - AT91C_PIO_PB5 | AT91C_PIO_PB6; - } - piob->PIO_PPUDR = AT91C_PIO_PB3 | AT91C_PIO_PB4 | - AT91C_PIO_PB5 | AT91C_PIO_PB6; - piob->PIO_PER = AT91C_PIO_PB3 | AT91C_PIO_PB4 | - AT91C_PIO_PB5 | AT91C_PIO_PB6; - - /* - * arch number of CMC_PU2-Board. MACH_TYPE_CMC_PU2 is not supported in - * the linuxarm kernel, yet. - */ - /* gd->bd->bi_arch_number = MACH_TYPE_CMC_PU2; */ - gd->bd->bi_arch_number = 251; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -int checkboard (void) -{ - if (hw_detect() & CMC_PU2) - puts ("Board: CMC-PU2 (Rittal GmbH)\n"); - else if (hw_detect() & CMC_BASIC) - puts ("Board: CMC-BASIC (Rittal GmbH)\n"); - else if (hw_detect() & CMC_HP_BASIC) - puts ("Board: CMC-HP-BASIC (Rittal GmbH)\n"); - else - puts ("Board: unknown\n"); - return 0; -} - -int hw_detect (void) -{ - AT91PS_PIO pio = AT91C_BASE_PIOB; - - /* PIOB clock enabling */ - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB; - - /* configure PB12 as input without pull up */ - pio->PIO_ODR = AT91C_PIO_PB12; - pio->PIO_PPUDR = AT91C_PIO_PB12; - pio->PIO_PER = AT91C_PIO_PB12; - - /* configure PB13 as input without pull up */ - pio->PIO_ODR = AT91C_PIO_PB13; - pio->PIO_PPUDR = AT91C_PIO_PB13; - pio->PIO_PER = AT91C_PIO_PB13; - - /* read board identification pin */ - if (pio->PIO_PDSR & AT91C_PIO_PB12) - return ((pio->PIO_PDSR & AT91C_PIO_PB13) - ? CMC_PU2 : 0); - else - return ((pio->PIO_PDSR & AT91C_PIO_PB13) - ? CMC_HP_BASIC : CMC_BASIC); -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) - -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = dm9161_InitPhy; - p_phyops->IsPhyConnected = dm9161_IsPhyConnected; - p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; - p_phyops->AutoNegotiate = dm9161_AutoNegotiate; -} - -#endif -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif diff --git a/board/cmc_pu2/config.mk b/board/cmc_pu2/config.mk deleted file mode 100644 index cdb8a5f..0000000 --- a/board/cmc_pu2/config.mk +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x20F00000 -## For testing: load at 0x20100000 and "go" at 0x201000A4 -#CONFIG_SYS_TEXT_BASE = 0x20100000 diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c deleted file mode 100644 index d10faab..0000000 --- a/board/cmc_pu2/flash.c +++ /dev/null @@ -1,469 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * Modified for the CMC PU2 by (C) Copyright 2004 Gary Jennejohn - * garyj@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#ifndef CONFIG_ENV_ADDR -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -#endif - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#define FLASH_CYCLE1 0x0555 -#define FLASH_CYCLE2 0x02AA - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_short *addr, flash_info_t *info); -static void flash_reset(flash_info_t *info); -static int write_word_amd(flash_info_t *info, vu_short *dest, ushort data); -static flash_info_t *flash_get_info(ulong base); - -/*----------------------------------------------------------------------- - * flash_init() - * - * sets up flash_info and returns size of FLASH (bytes) - */ -unsigned long flash_init (void) -{ - unsigned long size = 0; - ulong flashbase = CONFIG_SYS_FLASH_BASE; - - /* Init: no FLASHes known */ - memset(&flash_info[0], 0, sizeof(flash_info_t)); - - flash_info[0].size = flash_get_size((vu_short *)flashbase, &flash_info[0]); - - size = flash_info[0].size; - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - flash_get_info(CONFIG_SYS_MONITOR_BASE)); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, - flash_get_info(CONFIG_ENV_ADDR)); -#endif - - return size ? size : 1; -} - -/*----------------------------------------------------------------------- - */ -static void flash_reset(flash_info_t *info) -{ - vu_short *base = (vu_short *)(info->start[0]); - - /* Put FLASH back in read mode */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) - *base = 0x00FF; /* Intel Read Mode */ - else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) - *base = 0x00F0; /* AMD Read Mode */ -} - -/*----------------------------------------------------------------------- - */ - -static flash_info_t *flash_get_info(ulong base) -{ - int i; - flash_info_t * info; - - info = NULL; - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) { - info = & flash_info[i]; - if (info->size && info->start[0] <= base && - base <= info->start[0] + info->size - 1) - break; - } - - return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info; -} - -/*----------------------------------------------------------------------- - */ - -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_SST: printf ("SST "); break; - case FLASH_MAN_STM: printf ("STM "); break; - case FLASH_MAN_INTEL: printf ("INTEL "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_S29GL064M: - printf ("S29GL064M-R6 (64Mbit, uniform sector size)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, - info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -ulong flash_get_size (vu_short *addr, flash_info_t *info) -{ - int i; - ushort value; - ulong base = (ulong)addr; - - /* Write auto select command sequence */ - addr[FLASH_CYCLE1] = 0x00AA; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE2] = 0x0055; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE1] = 0x0090; /* selects Intel or AMD */ - - /* read Manufacturer ID */ - udelay(100); - value = addr[0]; - debug ("Manufacturer ID: %04X\n", value); - - switch (value) { - - case (AMD_MANUFACT & 0xFFFF): - debug ("Manufacturer: AMD (Spansion)\n"); - info->flash_id = FLASH_MAN_AMD; - break; - - case (INTEL_MANUFACT & 0xFFFF): - debug ("Manufacturer: Intel (not supported yet)\n"); - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - printf ("Unknown Manufacturer ID: %04X\n", value); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - goto out; - } - - value = addr[1]; - debug ("Device ID: %04X\n", value); - - switch (addr[1]) { - - case (AMD_ID_MIRROR & 0xFFFF): - debug ("Mirror Bit flash: addr[14] = %08X addr[15] = %08X\n", - addr[14], addr[15]); - - switch(addr[14]) { - case (AMD_ID_GL064M_2 & 0xFFFF): - if (addr[15] != (AMD_ID_GL064M_3 & 0xffff)) { - printf ("Chip: S29GLxxxM -> unknown\n"); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - } else { - debug ("Chip: S29GL064M-R6\n"); - info->flash_id += FLASH_S29GL064M; - info->sector_count = 128; - info->size = 0x00800000; - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base; - base += 0x10000; - } - } - break; /* => 16 MB */ - default: - printf ("Chip: *** unknown ***\n"); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - break; - - default: - printf ("Unknown Device ID: %04X\n", value); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - -out: - /* Put FLASH back in read mode */ - flash_reset(info); - - return (info->size); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_short *addr = (vu_short *)(info->start[0]); - int flag, prot, sect, ssect, l_sect; - ulong now, last, start; - - debug ("flash_erase: first: %d last: %d\n", s_first, s_last); - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* - * Start erase on unprotected sectors. - * Since the flash can erase multiple sectors with one command - * we take advantage of that by doing the erase in chunks of - * 3 sectors. - */ - for (sect = s_first; sect <= s_last; ) { - l_sect = -1; - - addr[FLASH_CYCLE1] = 0x00AA; - addr[FLASH_CYCLE2] = 0x0055; - addr[FLASH_CYCLE1] = 0x0080; - addr[FLASH_CYCLE1] = 0x00AA; - addr[FLASH_CYCLE2] = 0x0055; - - /* do the erase in chunks of at most 3 sectors */ - for (ssect = 0; ssect < 3; ssect++) { - if ((sect + ssect) > s_last) - break; - if (info->protect[sect + ssect] == 0) { /* not protected */ - addr = (vu_short *)(info->start[sect + ssect]); - addr[0] = 0x0030; - l_sect = sect + ssect; - } - } - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer(0); - last = 0; - addr = (vu_short *)(info->start[l_sect]); - while ((addr[0] & 0x0080) != 0x0080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - addr = (vu_short *)info->start[0]; - addr[0] = 0x00F0; /* reset bank */ - sect += ssect; - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - -DONE: - /* reset to read mode */ - addr = (vu_short *)info->start[0]; - addr[0] = 0x00F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong wp, data; - int rc; - - if (addr & 1) { - printf ("unaligned destination not supported\n"); - return ERR_ALIGN; - }; - - if ((int) src & 1) { - printf ("unaligned source not supported\n"); - return ERR_ALIGN; - }; - - wp = addr; - - while (cnt >= 2) { - data = *((vu_short *)src); - if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) { -printf ("write_buff 1: write_word_amd() rc=%d\n", rc); - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) { - return (ERR_OK); - } - - if (cnt == 1) { - data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << 8); - if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) { -printf ("write_buff 1: write_word_amd() rc=%d\n", rc); - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - return ERR_OK; -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for AMD FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data) -{ - int flag; - vu_short *base; /* first address in flash bank */ - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - base = (vu_short *)(info->start[0]); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - base[FLASH_CYCLE1] = 0x00AA; /* unlock */ - base[FLASH_CYCLE2] = 0x0055; /* unlock */ - base[FLASH_CYCLE1] = 0x00A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - /* data polling for D7 */ - while ((*dest & 0x0080) != (data & 0x0080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = 0x00F0; /* reset bank */ - return (1); - } - } - return (0); -} diff --git a/board/cmc_pu2/load_sernum_ethaddr.c b/board/cmc_pu2/load_sernum_ethaddr.c deleted file mode 100644 index 6f85dd9..0000000 --- a/board/cmc_pu2/load_sernum_ethaddr.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2005 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* #define DEBUG */ - -#include <common.h> -#include <net.h> - -#define I2C_CHIP 0x50 /* I2C bus address of onboard EEPROM */ -#define I2C_ALEN 1 /* length of EEPROM addresses in bytes */ -#define I2C_OFFSET 0x0 /* start address of manufacturere data block - * in EEPROM */ - -/* 64 Byte manufacturer data block in EEPROM */ -struct manufacturer_data { - unsigned int serial_number; /* serial number (0...999999) */ - unsigned short hardware; /* hardware version (e.g. V1.02) */ - unsigned short manuf_date; /* manufacture date (e.g. 25/02) */ - unsigned char name[20]; /* device name (in CHIP.INI) */ - unsigned char macadr[6]; /* MAC address */ - signed char a_kal[4]; /* calibration value for U */ - signed char i_kal[4]; /* calibration value for I */ - unsigned char reserve[18]; /* reserved */ - unsigned short save_nr; /* save count */ - unsigned short chksum; /* checksum */ -}; - - -int i2c_read (unsigned char chip, unsigned int addr, int alen, - unsigned char *buffer, int len); - -/*----------------------------------------------------------------------- - * Process manufacturer data block in EEPROM: - * - * If we boot on a system fresh from factory, check if the manufacturer data - * in the EEPROM is valid and save some information it contains. - * - * CMC manufacturer data is defined as follows: - * - * - located in the onboard EEPROM - * - starts at offset 0x0 - * - size 0x00000040 - * - * Internal structure: see struct definition - */ - -int misc_init_r(void) -{ - struct manufacturer_data data; - char serial [9]; - unsigned short chksum; - unsigned char *p; - unsigned short i; - -#if !defined(CONFIG_HARD_I2C) && !defined(CONFIG_SOFT_I2C) -#error you must define some I2C support (CONFIG_HARD_I2C or CONFIG_SOFT_I2C) -#endif - if (i2c_read(I2C_CHIP, I2C_OFFSET, I2C_ALEN, (unsigned char *)&data, - sizeof(data)) != 0) { - puts ("Error reading manufacturer data from EEPROM\n"); - return -1; - } - - /* check if manufacturer data block is valid */ - p = (unsigned char *)&data; - chksum = 0; - for (i = 0; i < (sizeof(data) - sizeof(data.chksum)); i++) - chksum += *p++; - - debug ("checksum of manufacturer data block: %#.4x\n", chksum); - - if (chksum != data.chksum) { - puts ("Error: manufacturer data block has invalid checksum\n"); - return -1; - } - - /* copy serial number */ - sprintf (serial, "%d", data.serial_number); - - /* set serial# and ethaddr if not yet defined */ - if (getenv("serial#") == NULL) { - setenv ("serial#", serial); - } - - if (getenv("ethaddr") == NULL) { - eth_setenv_enetaddr("ethaddr", data.macadr); - } - - return 0; -} diff --git a/boards.cfg b/boards.cfg index 2687bb3..24a4e56 100644 --- a/boards.cfg +++ b/boards.cfg @@ -57,7 +57,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel eb_cpux9k2 arm arm920t - BuS at91 cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91 cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT -cmc_pu2 arm arm920t - - at91rm9200 csb637 arm arm920t - - at91rm9200 kb9202 arm arm920t - - at91rm9200 m501sk arm arm920t - - at91rm9200 diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 1c5c5e2..8f5c7f5 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +cmc_pu2 arm arm920t - 2011-07-17 at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop stelian.pop@leadtechdesign.com voiceblue arm arm925t - 2011-07-17 versatile arm ARM926EJS - 2011-07-17 Peter Pearse peter.pearse@arm.com diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h deleted file mode 100644 index a197635..0000000 --- a/include/configs/cmc_pu2.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * 2004-2005 Gary Jennejohn garyj@denx.de - * - * Configuration settings for the CMC PU2 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_BAUDRATE 9600 - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#undef CONFIG_DBGU -#define CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_HARD_I2C - -#ifdef CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 0 /* not used */ -#define CONFIG_SYS_I2C_SLAVE 0 /* not used */ -#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x32 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW -#else -#define CONFIG_TIMESTAMP -#endif -/* still about 20 kB free with this defined */ -#define CONFIG_SYS_LONGHELP - -#define CONFIG_BOOTDELAY 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC - -#if defined(CONFIG_HARD_I2C) - #define CONFIG_CMD_DATE - #define CONFIG_CMD_EEPROM - #define CONFIG_CMD_I2C -#endif - - -#define CONFIG_MISC_INIT_R -#define CONFIG_SYS_LONGHELP - -#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ -#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91C_USE_RMII - -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 -#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT (11 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT ( 2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */ -#define CONFIG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */ -#define CONFIG_ENV_SIZE (16 << 10) /* Use only 16 kB */ - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } - -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \ - "addmtd;bootm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \ - "addcons addmtd; bootm\0" \ - "flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \ - "flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \ - "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ - "${hostname}::off\0" \ - "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \ - "64k(environment),768k(linux),4096k(root),-\0" \ - "load=tftp ${loadaddr} ${loadfile}\0" \ - "update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \ - "cp.b ${loadaddr} 10000000 ${filesize};" \ - "protect on 10000000 1001ffff\0" \ - "updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \ - "cp.b ${loadaddr} 10030000 ${filesize}\0" \ - "updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \ - "cp.b ${loadaddr} 100f0000 ${filesize}\0" \ - "updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \ - "cp.b ${loadaddr} 104f0000 ${filesize}\0" \ - "cramfsimage=cramfs_cmc-pu2.img\0" \ - "jffsimage=jffs2_cmc-pu2.img\0" \ - "loadfile=u-boot_cmc-pu2.bin\0" \ - "bootfile=uImage_cmc-pu2\0" \ - "loadaddr=0x20800000\0" \ - "hostname=CMC-TC-PU2\0" \ - "bootcmd=run dhcp_start;run flash_cramfs\0" \ - "autoload=n\0" \ - "dhcp_start=echo no DHCP\0" \ - "ipaddr=192.168.0.190\0" -#endif /* __CONFIG_H */

Signed-off-by: Wolfgang Denk wd@denx.de --- board/kb9202/Makefile | 53 ------------- board/kb9202/config.mk | 1 - board/kb9202/kb9202.c | 107 ------------------------- boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/kb9202.h | 196 ---------------------------------------------- 6 files changed, 1 insertions(+), 358 deletions(-) delete mode 100644 board/kb9202/Makefile delete mode 100644 board/kb9202/config.mk delete mode 100644 board/kb9202/kb9202.c delete mode 100644 include/configs/kb9202.h

diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile deleted file mode 100644 index 49be161..0000000 --- a/board/kb9202/Makefile +++ /dev/null @@ -1,53 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# Adapted for KwikByte KB920x boards - APR2005 -# -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := kb9202.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/kb9202/config.mk b/board/kb9202/config.mk deleted file mode 100644 index 2077692..0000000 --- a/board/kb9202/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c deleted file mode 100644 index 3164cc5..0000000 --- a/board/kb9202/kb9202.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Adapted for KwikByte KB920x board from at91rm9200dk.c: 22APR2005 - */ - -#include <common.h> -#include <asm/arch/AT91RM9200.h> -#include <asm/io.h> -#include <netdev.h> -#if defined(CONFIG_DRIVER_ETHER) -#include <at91rm9200_net.h> -#include <lxt971a.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -void lowlevel_init(void) { - /* Required by assembly functions - do nothing */ -} - -int board_init (void) -{ - /* Enable Ctrlc */ - console_init_f (); - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - gd->bd->bi_arch_number = MACH_TYPE_KB9200; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) - -unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac); -UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac); -UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac); -UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status); - -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = lxt972_InitPhy; - p_phyops->IsPhyConnected = lxt972_IsPhyConnected; - p_phyops->GetLinkSpeed = lxt972_GetLinkSpeed; - p_phyops->AutoNegotiate = lxt972_AutoNegotiate; -} - -#endif -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif diff --git a/boards.cfg b/boards.cfg index 4279dc7..ae3c093 100644 --- a/boards.cfg +++ b/boards.cfg @@ -57,7 +57,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel eb_cpux9k2 arm arm920t - BuS at91 cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91 cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT -kb9202 arm arm920t - - at91rm9200 m501sk arm arm920t - - at91rm9200 at91rm9200dk arm arm920t - atmel at91rm9200 mx1ads arm arm920t - - imx diff --git a/doc/README.scrapyard b/doc/README.scrapyard index d8c2cb6..24233a0 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +kb9202 arm arm920t - 2011-07-17 csb637 arm arm920t - 2011-07-17 cmc_pu2 arm arm920t - 2011-07-17 at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop stelian.pop@leadtechdesign.com diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h deleted file mode 100644 index cfb7cea..0000000 --- a/include/configs/kb9202.h +++ /dev/null @@ -1,196 +0,0 @@ -/* - * Rick Bronson rick@efn.org - * - * Configuation settings for the AT91RM9200DK board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Adatped for KwikByte KB920x board from at91rm9200dk.h: 22APR2005 - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 180000000 /* from 10 MHz crystal */ -#define AT91C_MASTER_CLOCK 60000000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -/* Only define one of the following, based on board type */ -/* #define CONFIG_KB9200 1 KwikByte KB9202 board */ -/* #define CONFIG_KB9201 1 KwikByte KB9202 board */ -#define CONFIG_KB9202 1 /* KwikByte KB9202 board */ - -#define CONFIG_KB920x 1 /* Any KB920x board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SKIP_LOWLEVEL_INIT - -#define CONFIG_SYS_LONGHELP - -#ifndef roundup -#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) -#endif -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (roundup(CONFIG_ENV_SIZE,4096) + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ENV_OVERWRITE 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC - - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024) - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif -#define CONFIG_NET_RETRY_COUNT 20 - -#define CONFIG_SYS_FLASH_BASE 0x10000000 - -#ifdef CONFIG_KB9202 -#define PHYS_FLASH_SIZE 0x1000000 -#else -#define PHYS_FLASH_SIZE 0x200000 -#endif - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_HARD_I2C - -#define CONFIG_ENV_IS_IN_EEPROM - -#ifdef CONFIG_KB9202 -#define CONFIG_ENV_OFFSET 0x3E00 -#define CONFIG_ENV_SIZE 0x0200 -#else -#define CONFIG_ENV_OFFSET 0x1000 -#define CONFIG_ENV_SIZE 0x1000 -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* not used */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } - -#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI - -#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif

Signed-off-by: Wolfgang Denk wd@denx.de --- board/atmel/at91rm9200dk/Makefile | 56 ---- board/atmel/at91rm9200dk/at91rm9200dk.c | 167 ---------- board/atmel/at91rm9200dk/config.mk | 1 - board/atmel/at91rm9200dk/flash.c | 504 ------------------------------- board/atmel/at91rm9200dk/led.c | 80 ----- board/atmel/at91rm9200dk/mux.c | 29 -- board/atmel/at91rm9200dk/partition.c | 40 --- boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/at91rm9200dk.h | 202 ------------ 10 files changed, 1 insertions(+), 1080 deletions(-) delete mode 100644 board/atmel/at91rm9200dk/Makefile delete mode 100644 board/atmel/at91rm9200dk/at91rm9200dk.c delete mode 100644 board/atmel/at91rm9200dk/config.mk delete mode 100644 board/atmel/at91rm9200dk/flash.c delete mode 100644 board/atmel/at91rm9200dk/led.c delete mode 100644 board/atmel/at91rm9200dk/mux.c delete mode 100644 board/atmel/at91rm9200dk/partition.c delete mode 100644 include/configs/at91rm9200dk.h

diff --git a/board/atmel/at91rm9200dk/Makefile b/board/atmel/at91rm9200dk/Makefile deleted file mode 100644 index bc3dbc6..0000000 --- a/board/atmel/at91rm9200dk/Makefile +++ /dev/null @@ -1,56 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y += $(BOARD).o -COBJS-y += flash.o -COBJS-y += led.o -ifdef CONFIG_HAS_DATAFLASH -COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += mux.o -COBJS-y += partition.o -endif - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/atmel/at91rm9200dk/at91rm9200dk.c b/board/atmel/at91rm9200dk/at91rm9200dk.c deleted file mode 100644 index 49b5fe3..0000000 --- a/board/atmel/at91rm9200dk/at91rm9200dk.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <exports.h> -#include <netdev.h> -#include <asm/arch/AT91RM9200.h> -#include <asm/io.h> - -#if defined(CONFIG_DRIVER_ETHER) -#include <at91rm9200_net.h> -#include <dm9161.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* Enable Ctrlc */ - console_init_f (); - - /* Correct IRDA resistor problem */ - /* Set PA23_TXD in Output */ - ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2; - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* arch number of AT91RM9200DK-Board */ - gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -void board_reset (void) -{ - AT91PS_PIO pio = AT91C_BASE_PIOA; - - /* Clear PA19 to trigger the hard reset */ - writel(0x00080000, pio->PIO_CODR); - writel(0x00080000, pio->PIO_OER); - writel(0x00080000, pio->PIO_PER); -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) - -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = dm9161_InitPhy; - p_phyops->IsPhyConnected = dm9161_IsPhyConnected; - p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; - p_phyops->AutoNegotiate = dm9161_AutoNegotiate; -} - -#endif -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif - -/* - * Disk On Chip (NAND) Millenium initialization. - * The NAND lives in the CS2* space - */ -#if defined(CONFIG_CMD_NAND) -extern ulong nand_probe (ulong physadr); - -#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */ -void nand_init (void) -{ - /* Setup Smart Media, fitst enable the address range of CS3 */ - *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; - /* set the bus interface characteristics based on - tDS Data Set up Time 30 - ns - tDH Data Hold Time 20 - ns - tALS ALE Set up Time 20 - ns - 16ns at 60 MHz ~= 3 */ -/*memory mapping structures */ -#define SM_ID_RWH (5 << 28) -#define SM_RWH (1 << 28) -#define SM_RWS (0 << 24) -#define SM_TDF (1 << 8) -#define SM_NWS (3) - AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS | - AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 | - SM_TDF | AT91C_SMC2_WSEN | SM_NWS); - - /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */ - *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | - AT91C_PC3_BFBAA_SMWE; - *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | - AT91C_PC3_BFBAA_SMWE; - - /* Configure PC2 as input (signal READY of the SmartMedia) */ - *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */ - *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */ - - /* Configure PB1 as input (signal Card Detect of the SmartMedia) */ - *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */ - *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */ - - /* PIOB and PIOC clock enabling */ - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB; - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC; - - if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1) - printf (" No SmartMedia card inserted\n"); -#ifdef DEBUG - printf (" SmartMedia card inserted\n"); - - printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE); -#endif - printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20); -} -#endif diff --git a/board/atmel/at91rm9200dk/config.mk b/board/atmel/at91rm9200dk/config.mk deleted file mode 100644 index 2077692..0000000 --- a/board/atmel/at91rm9200dk/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c deleted file mode 100644 index be22743..0000000 --- a/board/atmel/at91rm9200dk/flash.c +++ /dev/null @@ -1,504 +0,0 @@ -/* - * (C) Copyright 2002 - * Lineo, Inc. <www.lineo.com> - * Bernhard Kuhn bkuhn@lineo.com - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke azu@sysgo.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -ulong myflush(void); - - -/* Flash Organization Structure */ -typedef struct OrgDef -{ - unsigned int sector_number; - unsigned int sector_size; -} OrgDef; - - -/* Flash Organizations */ -OrgDef OrgAT49BV16x4[] = -{ - { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ - { 2, 32*1024 }, /* 2 * 32 kBytes sectors */ - { 30, 64*1024 }, /* 30 * 64 kBytes sectors */ -}; - -OrgDef OrgAT49BV16x4A[] = -{ - { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ - { 31, 64*1024 }, /* 31 * 64 kBytes sectors */ -}; - -OrgDef OrgAT49BV6416[] = -{ - { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ - { 127, 64*1024 }, /* 127 * 64 kBytes sectors */ -}; - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/* AT49BV1614A Codes */ -#define FLASH_CODE1 0xAA -#define FLASH_CODE2 0x55 -#define ID_IN_CODE 0x90 -#define ID_OUT_CODE 0xF0 - - -#define CMD_READ_ARRAY 0x00F0 -#define CMD_UNLOCK1 0x00AA -#define CMD_UNLOCK2 0x0055 -#define CMD_ERASE_SETUP 0x0080 -#define CMD_ERASE_CONFIRM 0x0030 -#define CMD_PROGRAM 0x00A0 -#define CMD_UNLOCK_BYPASS 0x0020 -#define CMD_SECTOR_UNLOCK 0x0070 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1))) - -#define BIT_ERASE_DONE 0x0080 -#define BIT_RDY_MASK 0x0080 -#define BIT_PROGRAM_ERROR 0x0020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - -/*----------------------------------------------------------------------- - */ -void flash_identification (flash_info_t * info) -{ - volatile u16 manuf_code, device_code, add_device_code; - - MEM_FLASH_ADDR1 = FLASH_CODE1; - MEM_FLASH_ADDR2 = FLASH_CODE2; - MEM_FLASH_ADDR1 = ID_IN_CODE; - - manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE; - device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2); - add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1)); - - MEM_FLASH_ADDR1 = FLASH_CODE1; - MEM_FLASH_ADDR2 = FLASH_CODE2; - MEM_FLASH_ADDR1 = ID_OUT_CODE; - - /* Vendor type */ - info->flash_id = ATM_MANUFACT & FLASH_VENDMASK; - printf ("Atmel: "); - - if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) { - - if ((add_device_code & FLASH_TYPEMASK) == - (ATM_ID_BV1614A & FLASH_TYPEMASK)) { - info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK; - printf ("AT49BV1614A (16Mbit)\n"); - } else { /* AT49BV1614 Flash */ - info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; - printf ("AT49BV1614 (16Mbit)\n"); - } - - } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) { - info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK; - printf ("AT49BV6416 (64Mbit)\n"); - } -} - -ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks) -{ - int i, nb_sectors = 0; - - for (i=0; i<nb_blocks; i++){ - nb_sectors += pOrgDef[i].sector_number; - } - - return nb_sectors; -} - -void flash_unlock_sector(flash_info_t * info, unsigned int sector) -{ - volatile u16 *addr = (volatile u16 *) (info->start[sector]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - *addr = CMD_SECTOR_UNLOCK; -} - - -ulong flash_init (void) -{ - int i, j, k; - unsigned int flash_nb_blocks, sector; - unsigned int start_address; - OrgDef *pOrgDef; - - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_identification (&flash_info[i]); - - if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV1614 & FLASH_TYPEMASK)) { - - pOrgDef = OrgAT49BV16x4; - flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef); - } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */ - - pOrgDef = OrgAT49BV16x4A; - flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef); - } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ - - pOrgDef = OrgAT49BV6416; - flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef); - } else { - flash_nb_blocks = 0; - pOrgDef = OrgAT49BV16x4; - } - - flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks); - memset (flash_info[i].protect, 0, flash_info[i].sector_count); - - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured too many flash banks!\n"); - - sector = 0; - start_address = flashbase; - flash_info[i].size = 0; - - for (j = 0; j < flash_nb_blocks; j++) { - for (k = 0; k < pOrgDef[j].sector_number; k++) { - flash_info[i].start[sector++] = start_address; - start_address += pOrgDef[j].sector_size; - flash_info[i].size += pOrgDef[j].sector_size; - } - } - - size += flash_info[i].size; - - if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ - - /* Unlock all sectors at reset */ - for (j=0; j<flash_info[i].sector_count; j++){ - flash_unlock_sector(&flash_info[i], j); - } - } - } - - /* Protect binary boot image */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]); - - /* Protect environment variables */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - /* Protect U-Boot gzipped image */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_U_BOOT_BASE, - CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (ATM_MANUFACT & FLASH_VENDMASK): - printf ("Atmel: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (ATM_ID_BV1614 & FLASH_TYPEMASK): - printf ("AT49BV1614 (16Mbit)\n"); - break; - case (ATM_ID_BV1614A & FLASH_TYPEMASK): - printf ("AT49BV1614A (16Mbit)\n"); - break; - case (ATM_ID_BV6416 & FLASH_TYPEMASK): - printf ("AT49BV6416 (64Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - return; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ulong result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip1; - ulong start; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (ATM_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - volatile u16 *addr = (volatile u16 *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip1 = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip1 = TMO; - break; - } - - if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) - chip1 = READY; - - } while (!chip1); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip1 == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip1 == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - -outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile u16 *addr = (volatile u16 *) dest; - ulong result; - int rc = ERR_OK; - int cflag, iflag; - int chip1; - ulong start; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait until flash is ready */ - chip1 = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - chip1 = ERR | TMO; - break; - } - if (!chip1 && ((result & 0x80) == (data & 0x80))) - chip1 = READY; - - } while (!chip1); - - *addr = CMD_READ_ARRAY; - - if (chip1 == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong wp, data; - int rc; - - if (addr & 1) { - printf ("unaligned destination not supported\n"); - return ERR_ALIGN; - }; - - if ((int) src & 1) { - printf ("unaligned source not supported\n"); - return ERR_ALIGN; - }; - - wp = addr; - - while (cnt >= 2) { - data = *((volatile u16 *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 1) { - data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << - 8); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - }; - - return ERR_OK; -} diff --git a/board/atmel/at91rm9200dk/led.c b/board/atmel/at91rm9200dk/led.c deleted file mode 100644 index 47a3bfc..0000000 --- a/board/atmel/at91rm9200dk/led.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * (C) Copyright 2006 - * Atmel Nordic AB <www.atmel.com> - * Ulf Samuelsson ulf@atmel.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/AT91RM9200.h> - -#define GREEN_LED AT91C_PIO_PB0 -#define YELLOW_LED AT91C_PIO_PB1 -#define RED_LED AT91C_PIO_PB2 - -void green_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_CODR = GREEN_LED; -} - -void yellow_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_CODR = YELLOW_LED; -} - -void red_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_CODR = RED_LED; -} - -void green_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = GREEN_LED; -} - -void yellow_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = YELLOW_LED; -} - -void red_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = RED_LED; -} - - -void coloured_LED_init (void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - AT91PS_PMC PMC = AT91C_BASE_PMC; - PMC->PMC_PCER = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */ - /* Disable peripherals on LEDs */ - PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; - /* Enable pins as outputs */ - PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; - /* Turn all LEDs OFF */ - PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; -} diff --git a/board/atmel/at91rm9200dk/mux.c b/board/atmel/at91rm9200dk/mux.c deleted file mode 100644 index a00563e..0000000 --- a/board/atmel/at91rm9200dk/mux.c +++ /dev/null @@ -1,29 +0,0 @@ -#include <config.h> -#include <common.h> -#include <asm/hardware.h> -#include <dataflash.h> - -int AT91F_GetMuxStatus(void) { - AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */ - - - if(AT91C_BASE_PIOB->PIO_ODSR & CONFIG_SYS_DATAFLASH_MMC_PIO) - return 1; - - return 0; -} - -void AT91F_SelectMMC(void) { - AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */ - /* Set Output */ - AT91C_BASE_PIOB->PIO_SODR = CONFIG_SYS_DATAFLASH_MMC_PIO; -} - -void AT91F_SelectSPI(void) { - AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */ - /* Clear Output */ - AT91C_BASE_PIOB->PIO_CODR = CONFIG_SYS_DATAFLASH_MMC_PIO; -} diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c deleted file mode 100644 index c739b11..0000000 --- a/board/atmel/at91rm9200dk/partition.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * (C) Copyright 2008 - * Ulf Samuelsson ulf@atmel.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ -#include <common.h> -#include <config.h> -#include <asm/hardware.h> -#include <dataflash.h> - -AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; - -struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3} -}; - -/*define the area offsets*/ -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, - {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, - {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, - {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, -}; diff --git a/boards.cfg b/boards.cfg index e684d73..f72deb3 100644 --- a/boards.cfg +++ b/boards.cfg @@ -57,7 +57,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel eb_cpux9k2 arm arm920t - BuS at91 cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91 cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT -at91rm9200dk arm arm920t - atmel at91rm9200 mx1ads arm arm920t - - imx scb9328 arm arm920t - - imx cm4008 arm arm920t - - ks8695 diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 104430d..4c1e07a 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...

Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +at91rm9200dk arm arm920t - 2011-07-17 m501sk arm arm920t - 2011-07-17 kb9202 arm arm920t - 2011-07-17 csb637 arm arm920t - 2011-07-17 diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h deleted file mode 100644 index 15de310..0000000 --- a/include/configs/at91rm9200dk.h +++ /dev/null @@ -1,202 +0,0 @@ -/* - * Rick Bronson rick@efn.org - * - * Configuration settings for the AT91RM9200DK board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ -#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ -/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_BOOTDELAY 3 -/* #define CONFIG_ENV_OVERWRITE 1 */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - -#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif - -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91C_USE_RMII - -/* AC Characteristics */ -/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ -#define DATAFLASH_TCSS (0xC << 16) -#define DATAFLASH_TCHS (0x1 << 24) - -#define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 -#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#undef CONFIG_ENV_IS_IN_DATAFLASH - -#ifdef CONFIG_ENV_IS_IN_DATAFLASH -#define CONFIG_ENV_OFFSET 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ -#else -#define CONFIG_ENV_IS_IN_FLASH 1 -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ -#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ -#else -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ -#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -#endif /* CONFIG_ENV_IS_IN_DATAFLASH */ - - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ -#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) -#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ -#else -#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ -#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 -#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } - -#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif