On Wed, Jul 28, 2021 at 02:40:41PM -0300, Fabio Estevam wrote:

Hi Tom,

On Wed, Jul 28, 2021 at 2:04 PM Tom Rini trini@konsulko.com wrote:

...

Hey all,

I'm sending this email to people that are either listed as maintainers for the following boards, or have shown interest in that general area before. These boards are the only ones left in tree right now that do not have CONFIG_DM enabled: flea3 aspenite zmx25 mx28evk mx28evk_auart_console mx28evk_nand

I have sent the mx28evk DM conversion series: https://www.mail-archive.com/u-boot@lists.denx.de/msg398398.html

and

https://www.mail-archive.com/u-boot@lists.denx.de/msg398399.html

but it seems it got missed. Could you or Stefano please apply it?

I plan to support only mx28evk_defconfig and I am fine to remove the other mx28evk defconfig variants.

Ah yes, I remember now. Please send a follow-up to delete those other configs (and remove them from the MAINTAINERS file). It's early enough in the release cycle that I assume Stefano can get them. Thanks.

Hi Stefano,

On Wed, Jul 28, 2021 at 3:58 PM Stefano Babic sbabic@denx.de wrote:

Its status was erroneously set in patchwork - I'll pick it up.

Thanks. Peter Robinson's series to convert warp is also missing in master: https://www.mail-archive.com/u-boot@lists.denx.de/msg403736.html

Thanks

On 28.07.21 21:21, Tom Rini wrote:

On Wed, Jul 28, 2021 at 04:09:48PM -0300, Fabio Estevam wrote:

...

Hi Stefano,

On Wed, Jul 28, 2021 at 3:58 PM Stefano Babic sbabic@denx.de wrote:

...

Its status was erroneously set in patchwork - I'll pick it up.

Thanks. Peter Robinson's series to convert warp is also missing in master: https://www.mail-archive.com/u-boot@lists.denx.de/msg403736.html

I thought I had seen something about warp too. Any idea what happened in the imx tree?

For Fabio's patch, status was set to "Changes requested" and not assigned to me, so I have not taken his patch at all.

But with Peter's set is weird : I see they are in "Awaiting upstream", so that seems they were merged by me in u-boot-imx, so I do not really know. I check them again if I can apply on TOT.

Stefano

On Thu, Jul 29, 2021 at 08:14:34AM -0400, Tom Rini wrote:

On Thu, Jul 29, 2021 at 12:30:27PM +0200, Stefano Babic wrote:

...

On 28.07.21 21:21, Tom Rini wrote:

...

On Wed, Jul 28, 2021 at 04:09:48PM -0300, Fabio Estevam wrote:

...

Hi Stefano,

On Wed, Jul 28, 2021 at 3:58 PM Stefano Babic sbabic@denx.de wrote:

...

Its status was erroneously set in patchwork - I'll pick it up.

Thanks. Peter Robinson's series to convert warp is also missing in master: https://www.mail-archive.com/u-boot@lists.denx.de/msg403736.html

I thought I had seen something about warp too. Any idea what happened in the imx tree?

For Fabio's patch, status was set to "Changes requested" and not assigned to me, so I have not taken his patch at all.

That might have been me asking for the other defconfigs to be removed.

So where did we end up here? I didn't see a patch going by dropping the mx28 configs Fabio doesn't want (and the patch needs a minor refresh for email I think anyhow). No comments on few others. I'd like to make a drop-these-platforms series shortly.

On Wed, Aug 11, 2021 at 08:41:29PM -0300, Fabio Estevam wrote:

Hi Tom,

On Wed, Aug 11, 2021 at 6:27 PM Tom Rini trini@konsulko.com wrote:

...

So where did we end up here? I didn't see a patch going by dropping the mx28 configs Fabio doesn't want (and the patch needs a minor refresh for email I think anyhow). No comments on few others. I'd like to make a drop-these-platforms series shortly.

I have sent a patch that keeps only the main mx28evk_defconfig and deletes the others.

Thanks. A later follow-up would be converting the README to rST, of course.