This PWM driver can be used to support pwm functions for on all Rockchip Socs.

The previous chips than RK3288 did not support polarity, and register layout was different from the RK3288 PWM.

The RK3288 keep the current functions.

RK3308 and the chips after it, which can support hardware lock, configure duty, period and polarity at next same period, to prevent the intermediate temporary state.

Signed-off-by: David Wu david.wu@rock-chips.com --- Change in v2: None - Remove RK3399 compatible

arch/arm/include/asm/arch-rockchip/pwm.h | 17 ++- drivers/pwm/rk_pwm.c | 138 +++++++++++++++++++---- 2 files changed, 130 insertions(+), 25 deletions(-)

diff --git a/arch/arm/include/asm/arch-rockchip/pwm.h b/arch/arm/include/asm/arch-rockchip/pwm.h index b5178db394..e8594055cd 100644 --- a/arch/arm/include/asm/arch-rockchip/pwm.h +++ b/arch/arm/include/asm/arch-rockchip/pwm.h @@ -7,13 +7,15 @@ #ifndef _ASM_ARCH_PWM_H #define _ASM_ARCH_PWM_H

-struct rk3288_pwm { - u32 cnt; - u32 period_hpr; - u32 duty_lpr; - u32 ctrl; +struct rockchip_pwm_regs { + unsigned long duty; + unsigned long period; + unsigned long cntr; + unsigned long ctrl; }; -check_member(rk3288_pwm, ctrl, 0xc); + +#define PWM_CTRL_TIMER_EN (1 << 0) +#define PWM_CTRL_OUTPUT_EN (1 << 3)

#define RK_PWM_DISABLE (0 << 0) #define RK_PWM_ENABLE (1 << 0) @@ -33,6 +35,9 @@ check_member(rk3288_pwm, ctrl, 0xc); #define PWM_OUTPUT_LEFT (0 << 5) #define PWM_OUTPUT_CENTER (1 << 5)

+#define PWM_LOCK (1 << 6) +#define PWM_UNLOCK (0 << 6) + #define PWM_LP_ENABLE (1 << 8) #define PWM_LP_DISABLE (0 << 8)

diff --git a/drivers/pwm/rk_pwm.c b/drivers/pwm/rk_pwm.c index 88db294cf1..46888e9077 100644 --- a/drivers/pwm/rk_pwm.c +++ b/drivers/pwm/rk_pwm.c @@ -15,22 +15,38 @@ #include <asm/arch-rockchip/pwm.h> #include <power/regulator.h>

+DECLARE_GLOBAL_DATA_PTR; + +struct rockchip_pwm_data { + struct rockchip_pwm_regs regs; + unsigned int prescaler; + bool supports_polarity; + bool supports_lock; + u32 enable_conf; + u32 enable_conf_mask; +}; + struct rk_pwm_priv { - struct rk3288_pwm *regs; + fdt_addr_t base; ulong freq; - uint enable_conf; + u32 conf_polarity; + const struct rockchip_pwm_data *data; };

static int rk_pwm_set_invert(struct udevice *dev, uint channel, bool polarity) { struct rk_pwm_priv *priv = dev_get_priv(dev);

+ if (!priv->data->supports_polarity) { + debug("%s: Do not support polarity\n", __func__); + return 0; + } + debug("%s: polarity=%u\n", __func__, polarity); - priv->enable_conf &= ~(PWM_DUTY_MASK | PWM_INACTIVE_MASK); if (polarity) - priv->enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSTIVE; + priv->conf_polarity = PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSTIVE; else - priv->enable_conf |= PWM_DUTY_POSTIVE | PWM_INACTIVE_NEGATIVE; + priv->conf_polarity = PWM_DUTY_POSTIVE | PWM_INACTIVE_NEGATIVE;

return 0; } @@ -39,20 +55,44 @@ static int rk_pwm_set_config(struct udevice *dev, uint channel, uint period_ns, uint duty_ns) { struct rk_pwm_priv *priv = dev_get_priv(dev); - struct rk3288_pwm *regs = priv->regs; + const struct rockchip_pwm_regs *regs = &priv->data->regs; unsigned long period, duty; + u32 ctrl;

debug("%s: period_ns=%u, duty_ns=%u\n", __func__, period_ns, duty_ns); - writel(PWM_SEL_SRC_CLK | PWM_OUTPUT_LEFT | PWM_LP_DISABLE | - PWM_CONTINUOUS | priv->enable_conf | - RK_PWM_DISABLE, - &regs->ctrl);

- period = lldiv((uint64_t)(priv->freq / 1000) * period_ns, 1000000); - duty = lldiv((uint64_t)(priv->freq / 1000) * duty_ns, 1000000); + ctrl = readl(priv->base + regs->ctrl); + /* + * Lock the period and duty of previous configuration, then + * change the duty and period, that would not be effective. + */ + if (priv->data->supports_lock) { + ctrl |= PWM_LOCK; + writel(ctrl, priv->base + regs->ctrl); + } + + period = lldiv((uint64_t)priv->freq * period_ns, + priv->data->prescaler * 1000000000); + duty = lldiv((uint64_t)priv->freq * duty_ns, + priv->data->prescaler * 1000000000); + + writel(period, priv->base + regs->period); + writel(duty, priv->base + regs->duty); + + if (priv->data->supports_polarity) { + ctrl &= ~(PWM_DUTY_MASK | PWM_INACTIVE_MASK); + ctrl |= priv->conf_polarity; + } + + /* + * Unlock and set polarity at the same time, + * the configuration of duty, period and polarity + * would be effective together at next period. + */ + if (priv->data->supports_lock) + ctrl &= ~PWM_LOCK; + writel(ctrl, priv->base + regs->ctrl);

- writel(period, &regs->period_hpr); - writel(duty, &regs->duty_lpr); debug("%s: period=%lu, duty=%lu\n", __func__, period, duty);

return 0; @@ -61,10 +101,20 @@ static int rk_pwm_set_config(struct udevice *dev, uint channel, uint period_ns, static int rk_pwm_set_enable(struct udevice *dev, uint channel, bool enable) { struct rk_pwm_priv *priv = dev_get_priv(dev); - struct rk3288_pwm *regs = priv->regs; + const struct rockchip_pwm_regs *regs = &priv->data->regs; + u32 ctrl;

debug("%s: Enable '%s'\n", __func__, dev->name); - clrsetbits_le32(&regs->ctrl, RK_PWM_ENABLE, enable ? RK_PWM_ENABLE : 0); + + ctrl = readl(priv->base + regs->ctrl); + ctrl &= ~priv->data->enable_conf_mask; + + if (enable) + ctrl |= priv->data->enable_conf; + else + ctrl &= ~priv->data->enable_conf; + + writel(ctrl, priv->base + regs->ctrl);

return 0; } @@ -73,7 +123,7 @@ static int rk_pwm_ofdata_to_platdata(struct udevice *dev) { struct rk_pwm_priv *priv = dev_get_priv(dev);

- priv->regs = (struct rk3288_pwm *)dev_read_addr(dev); + priv->base = dev_read_addr(dev);

return 0; } @@ -89,8 +139,12 @@ static int rk_pwm_probe(struct udevice *dev) debug("%s get clock fail!\n", __func__); return -EINVAL; } + priv->freq = clk_get_rate(&clk); - priv->enable_conf = PWM_DUTY_POSTIVE | PWM_INACTIVE_POSTIVE; + priv->data = (struct rockchip_pwm_data *)dev_get_driver_data(dev); + + if (priv->data->supports_polarity) + priv->conf_polarity = PWM_DUTY_POSTIVE | PWM_INACTIVE_POSTIVE;

return 0; } @@ -101,8 +155,54 @@ static const struct pwm_ops rk_pwm_ops = { .set_enable = rk_pwm_set_enable, };

+static const struct rockchip_pwm_data pwm_data_v1 = { + .regs = { + .duty = 0x04, + .period = 0x08, + .cntr = 0x00, + .ctrl = 0x0c, + }, + .prescaler = 2, + .supports_polarity = false, + .supports_lock = false, + .enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN, + .enable_conf_mask = BIT(1) | BIT(3), +}; + +static const struct rockchip_pwm_data pwm_data_v2 = { + .regs = { + .duty = 0x08, + .period = 0x04, + .cntr = 0x00, + .ctrl = 0x0c, + }, + .prescaler = 1, + .supports_polarity = true, + .supports_lock = false, + .enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | RK_PWM_ENABLE | + PWM_CONTINUOUS, + .enable_conf_mask = GENMASK(2, 0) | BIT(5) | BIT(8), +}; + +static const struct rockchip_pwm_data pwm_data_v3 = { + .regs = { + .duty = 0x08, + .period = 0x04, + .cntr = 0x00, + .ctrl = 0x0c, + }, + .prescaler = 1, + .supports_polarity = true, + .supports_lock = true, + .enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | RK_PWM_ENABLE | + PWM_CONTINUOUS, + .enable_conf_mask = GENMASK(2, 0) | BIT(5) | BIT(8), +}; + static const struct udevice_id rk_pwm_ids[] = { - { .compatible = "rockchip,rk3288-pwm" }, + { .compatible = "rockchip,rk2928-pwm", .data = (ulong)&pwm_data_v1}, + { .compatible = "rockchip,rk3288-pwm", .data = (ulong)&pwm_data_v2}, + { .compatible = "rockchip,rk3328-pwm", .data = (ulong)&pwm_data_v3}, { } };