The GPIO bank name for banks J and K are not correct when using the 'gpio' command from the console.

The driver derives the bank name from the device tree instance string by using the instance value and adding 'A': gpio0@xxaddrxx is Bank A, gpio1@yyaddryy is Bank B and so on.

On the PIC32, there is no Bank I so instances 8 and 9 need to be incremented as a minimum change.

An alternative (less opaque) implementation would be to use a bank-name property instead but this would require modifying the driver code too.

Signed-off-by: John Robertson john.robertson@simiatec.com ---

arch/mips/dts/pic32mzda.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/dts/pic32mzda.dtsi b/arch/mips/dts/pic32mzda.dtsi index 8f9b4cc50e..2c2b7293d8 100644 --- a/arch/mips/dts/pic32mzda.dtsi +++ b/arch/mips/dts/pic32mzda.dtsi @@ -134,14 +134,14 @@ #gpio-cells = <2>; };

- gpioJ: gpio8@1f860800 { + gpioJ: gpio9@1f860800 { compatible = "microchip,pic32mzda-gpio"; reg = <0x1f860800 0xe0>; gpio-controller; #gpio-cells = <2>; };

- gpioK: gpio9@1f860900 { + gpioK: gpio10@1f860900 { compatible = "microchip,pic32mzda-gpio"; reg = <0x1f860900 0xe0>; gpio-controller;