Add pin configuration and pinmux support for UniPhier PH1-LD4 SoC.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---

Changes in v2: - Add input-enable settings - Sync pin-mux table with Linux pinctrl driver

drivers/pinctrl/uniphier/Kconfig | 6 ++ drivers/pinctrl/uniphier/Makefile | 2 + drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c | 133 +++++++++++++++++++++++++++++ 3 files changed, 141 insertions(+) create mode 100644 drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c

diff --git a/drivers/pinctrl/uniphier/Kconfig b/drivers/pinctrl/uniphier/Kconfig index 29a623d..03593cd 100644 --- a/drivers/pinctrl/uniphier/Kconfig +++ b/drivers/pinctrl/uniphier/Kconfig @@ -3,4 +3,10 @@ if ARCH_UNIPHIER config PINCTRL_UNIPHIER_CORE bool

+config PINCTRL_UNIPHIER_PH1_LD4 + bool "UniPhier PH1-LD4 SoC pinctrl driver" + depends on MACH_PH1_LD4 + default y + select PINCTRL_UNIPHIER_CORE + endif diff --git a/drivers/pinctrl/uniphier/Makefile b/drivers/pinctrl/uniphier/Makefile index 748aa1b..b4bd042 100644 --- a/drivers/pinctrl/uniphier/Makefile +++ b/drivers/pinctrl/uniphier/Makefile @@ -1 +1,3 @@ obj-$(CONFIG_PINCTRL_UNIPHIER_CORE) += pinctrl-uniphier-core.o + +obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c b/drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c new file mode 100644 index 0000000..7c7cfe6 --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) 2015 Masahiro Yamada yamada.masahiro@socionext.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-uniphier.h" + +static const struct uniphier_pinctrl_pin ph1_ld4_pins[] = { + UNIPHIER_PINCTRL_PIN(53, 0), + UNIPHIER_PINCTRL_PIN(54, 0), + UNIPHIER_PINCTRL_PIN(55, 0), + UNIPHIER_PINCTRL_PIN(56, 0), + UNIPHIER_PINCTRL_PIN(67, 0), + UNIPHIER_PINCTRL_PIN(68, 0), + UNIPHIER_PINCTRL_PIN(69, 0), + UNIPHIER_PINCTRL_PIN(70, 0), + UNIPHIER_PINCTRL_PIN(85, 0), + UNIPHIER_PINCTRL_PIN(88, 0), + UNIPHIER_PINCTRL_PIN(156, 0), +}; + +static const unsigned emmc_pins[] = {21, 22, 23, 24, 25, 26, 27}; +static const unsigned emmc_muxvals[] = {0, 1, 1, 1, 1, 1, 1}; +static const unsigned emmc_dat8_pins[] = {28, 29, 30, 31}; +static const unsigned emmc_dat8_muxvals[] = {1, 1, 1, 1}; +static const unsigned i2c0_pins[] = {102, 103}; +static const unsigned i2c0_muxvals[] = {0, 0}; +static const unsigned i2c1_pins[] = {104, 105}; +static const unsigned i2c1_muxvals[] = {0, 0}; +static const unsigned i2c2_pins[] = {108, 109}; +static const unsigned i2c2_muxvals[] = {2, 2}; +static const unsigned i2c3_pins[] = {108, 109}; +static const unsigned i2c3_muxvals[] = {3, 3}; +static const unsigned nand_pins[] = {24, 25, 26, 27, 28, 29, 30, 31, 158, 159, + 160, 161, 162, 163, 164}; +static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0}; +static const unsigned nand_cs1_pins[] = {22, 23}; +static const unsigned nand_cs1_muxvals[] = {0, 0}; +static const unsigned uart0_pins[] = {85, 88}; +static const unsigned uart0_muxvals[] = {1, 1}; +static const unsigned uart1_pins[] = {155, 156}; +static const unsigned uart1_muxvals[] = {13, 13}; +static const unsigned uart1b_pins[] = {69, 70}; +static const unsigned uart1b_muxvals[] = {23, 23}; +static const unsigned uart2_pins[] = {128, 129}; +static const unsigned uart2_muxvals[] = {13, 13}; +static const unsigned uart3_pins[] = {110, 111}; +static const unsigned uart3_muxvals[] = {1, 1}; +static const unsigned usb0_pins[] = {53, 54}; +static const unsigned usb0_muxvals[] = {0, 0}; +static const unsigned usb1_pins[] = {55, 56}; +static const unsigned usb1_muxvals[] = {0, 0}; +static const unsigned usb2_pins[] = {155, 156}; +static const unsigned usb2_muxvals[] = {4, 4}; +static const unsigned usb2b_pins[] = {67, 68}; +static const unsigned usb2b_muxvals[] = {23, 23}; +static const unsigned sd_pins[] = {44, 45, 46, 47, 48, 49, 50, 51, 52}; +static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; + +static const struct uniphier_pinctrl_group ph1_ld4_groups[] = { + UNIPHIER_PINCTRL_GROUP(emmc), + UNIPHIER_PINCTRL_GROUP(emmc_dat8), + UNIPHIER_PINCTRL_GROUP(i2c0), + UNIPHIER_PINCTRL_GROUP(i2c1), + UNIPHIER_PINCTRL_GROUP(i2c2), + UNIPHIER_PINCTRL_GROUP(i2c3), + UNIPHIER_PINCTRL_GROUP(nand), + UNIPHIER_PINCTRL_GROUP(nand_cs1), + UNIPHIER_PINCTRL_GROUP(uart0), + UNIPHIER_PINCTRL_GROUP(uart1), + UNIPHIER_PINCTRL_GROUP(uart1b), + UNIPHIER_PINCTRL_GROUP(uart2), + UNIPHIER_PINCTRL_GROUP(uart3), + UNIPHIER_PINCTRL_GROUP(usb0), + UNIPHIER_PINCTRL_GROUP(usb1), + UNIPHIER_PINCTRL_GROUP(usb2), + UNIPHIER_PINCTRL_GROUP(usb2b), + UNIPHIER_PINCTRL_GROUP(sd), +}; + +static const char * const ph1_ld4_functions[] = { + "emmc", + "i2c0", + "i2c1", + "i2c2", + "i2c3", + "nand", + "uart0", + "uart1", + "uart2", + "uart3", + "usb0", + "usb1", + "usb2", + "sd", +}; + +static struct uniphier_pinctrl_socdata ph1_ld4_pinctrl_socdata = { + .pins = ph1_ld4_pins, + .pins_count = ARRAY_SIZE(ph1_ld4_pins), + .groups = ph1_ld4_groups, + .groups_count = ARRAY_SIZE(ph1_ld4_groups), + .functions = ph1_ld4_functions, + .functions_count = ARRAY_SIZE(ph1_ld4_functions), + .mux_bits = 8, + .reg_stride = 4, + .load_pinctrl = false, +}; + +static int ph1_ld4_pinctrl_probe(struct udevice *dev) +{ + return uniphier_pinctrl_probe(dev, &ph1_ld4_pinctrl_socdata); +} + +static const struct udevice_id ph1_ld4_pinctrl_match[] = { + { .compatible = "socionext,ph1-ld4-pinctrl" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(ph1_ld4_pinctrl) = { + .name = "ph1-ld4-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(ph1_ld4_pinctrl_match), + .probe = ph1_ld4_pinctrl_probe, + .remove = uniphier_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv), + .ops = &uniphier_pinctrl_ops, +};

Add pin configuration and pinmux support for UniPhier PH1-sLD8 SoC.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---

Changes in v2: - Add input-enable settings - Sync pin-mux table with Linux pinctrl driver

drivers/pinctrl/uniphier/Kconfig | 6 ++ drivers/pinctrl/uniphier/Makefile | 1 + drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c | 141 ++++++++++++++++++++++++++++ 3 files changed, 148 insertions(+) create mode 100644 drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c

diff --git a/drivers/pinctrl/uniphier/Kconfig b/drivers/pinctrl/uniphier/Kconfig index c417a9f..a156a28 100644 --- a/drivers/pinctrl/uniphier/Kconfig +++ b/drivers/pinctrl/uniphier/Kconfig @@ -15,4 +15,10 @@ config PINCTRL_UNIPHIER_PH1_PRO4 default y select PINCTRL_UNIPHIER_CORE

+config PINCTRL_UNIPHIER_PH1_SLD8 + bool "UniPhier PH1-sLD8 SoC pinctrl driver" + depends on MACH_PH1_SLD8 + default y + select PINCTRL_UNIPHIER_CORE + endif diff --git a/drivers/pinctrl/uniphier/Makefile b/drivers/pinctrl/uniphier/Makefile index b1b597e..3349fff 100644 --- a/drivers/pinctrl/uniphier/Makefile +++ b/drivers/pinctrl/uniphier/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_PINCTRL_UNIPHIER_CORE) += pinctrl-uniphier-core.o

obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o +obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c b/drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c new file mode 100644 index 0000000..ccc1ac0 --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2015 Masahiro Yamada yamada.masahiro@socionext.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-uniphier.h" + +static const struct uniphier_pinctrl_pin ph1_sld8_pins[] = { + UNIPHIER_PINCTRL_PIN(32, 8), + UNIPHIER_PINCTRL_PIN(33, 8), + UNIPHIER_PINCTRL_PIN(34, 8), + UNIPHIER_PINCTRL_PIN(35, 8), + UNIPHIER_PINCTRL_PIN(36, 8), + UNIPHIER_PINCTRL_PIN(37, 8), + UNIPHIER_PINCTRL_PIN(38, 8), + UNIPHIER_PINCTRL_PIN(39, 8), + UNIPHIER_PINCTRL_PIN(40, 9), + UNIPHIER_PINCTRL_PIN(41, 0), + UNIPHIER_PINCTRL_PIN(42, 0), + UNIPHIER_PINCTRL_PIN(43, 0), + UNIPHIER_PINCTRL_PIN(44, 0), + UNIPHIER_PINCTRL_PIN(70, 0), + UNIPHIER_PINCTRL_PIN(71, 0), + UNIPHIER_PINCTRL_PIN(102, 10), + UNIPHIER_PINCTRL_PIN(103, 10), + UNIPHIER_PINCTRL_PIN(104, 11), + UNIPHIER_PINCTRL_PIN(105, 11), + UNIPHIER_PINCTRL_PIN(108, 13), + UNIPHIER_PINCTRL_PIN(109, 13), + UNIPHIER_PINCTRL_PIN(112, 0), + UNIPHIER_PINCTRL_PIN(113, 0), + UNIPHIER_PINCTRL_PIN(114, 0), + UNIPHIER_PINCTRL_PIN(115, 0), +}; + +static const unsigned emmc_pins[] = {21, 22, 23, 24, 25, 26, 27}; +static const unsigned emmc_muxvals[] = {1, 1, 1, 1, 1, 1, 1}; +static const unsigned emmc_dat8_pins[] = {28, 29, 30, 31}; +static const unsigned emmc_dat8_muxvals[] = {1, 1, 1, 1}; +static const unsigned i2c0_pins[] = {102, 103}; +static const unsigned i2c0_muxvals[] = {0, 0}; +static const unsigned i2c1_pins[] = {104, 105}; +static const unsigned i2c1_muxvals[] = {0, 0}; +static const unsigned i2c2_pins[] = {108, 109}; +static const unsigned i2c2_muxvals[] = {2, 2}; +static const unsigned i2c3_pins[] = {108, 109}; +static const unsigned i2c3_muxvals[] = {3, 3}; +static const unsigned nand_pins[] = {15, 16, 17, 18, 19, 20, 21, 24, 25, 26, + 27, 28, 29, 30, 31}; +static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0}; +static const unsigned nand_cs1_pins[] = {22, 23}; +static const unsigned nand_cs1_muxvals[] = {0, 0}; +static const unsigned uart0_pins[] = {70, 71}; +static const unsigned uart0_muxvals[] = {3, 3}; +static const unsigned uart1_pins[] = {114, 115}; +static const unsigned uart1_muxvals[] = {0, 0}; +static const unsigned uart2_pins[] = {112, 113}; +static const unsigned uart2_muxvals[] = {1, 1}; +static const unsigned uart3_pins[] = {110, 111}; +static const unsigned uart3_muxvals[] = {1, 1}; +static const unsigned usb0_pins[] = {41, 42}; +static const unsigned usb0_muxvals[] = {0, 0}; +static const unsigned usb1_pins[] = {43, 44}; +static const unsigned usb1_muxvals[] = {0, 0}; +static const unsigned usb2_pins[] = {114, 115}; +static const unsigned usb2_muxvals[] = {1, 1}; +static const unsigned sd_pins[] = {32, 33, 34, 35, 36, 37, 38, 39, 40}; +static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; + +static const struct uniphier_pinctrl_group ph1_sld8_groups[] = { + UNIPHIER_PINCTRL_GROUP(emmc), + UNIPHIER_PINCTRL_GROUP(emmc_dat8), + UNIPHIER_PINCTRL_GROUP(i2c0), + UNIPHIER_PINCTRL_GROUP(i2c1), + UNIPHIER_PINCTRL_GROUP(i2c2), + UNIPHIER_PINCTRL_GROUP(i2c3), + UNIPHIER_PINCTRL_GROUP(nand), + UNIPHIER_PINCTRL_GROUP(nand_cs1), + UNIPHIER_PINCTRL_GROUP(uart0), + UNIPHIER_PINCTRL_GROUP(uart1), + UNIPHIER_PINCTRL_GROUP(uart2), + UNIPHIER_PINCTRL_GROUP(uart3), + UNIPHIER_PINCTRL_GROUP(usb0), + UNIPHIER_PINCTRL_GROUP(usb1), + UNIPHIER_PINCTRL_GROUP(usb2), + UNIPHIER_PINCTRL_GROUP(sd), +}; + +static const char * const ph1_sld8_functions[] = { + "emmc", + "i2c0", + "i2c1", + "i2c2", + "i2c3", + "nand", + "uart0", + "uart1", + "uart2", + "uart3", + "usb0", + "usb1", + "usb2", + "sd", +}; + +static struct uniphier_pinctrl_socdata ph1_sld8_pinctrl_socdata = { + .pins = ph1_sld8_pins, + .pins_count = ARRAY_SIZE(ph1_sld8_pins), + .groups = ph1_sld8_groups, + .groups_count = ARRAY_SIZE(ph1_sld8_groups), + .functions = ph1_sld8_functions, + .functions_count = ARRAY_SIZE(ph1_sld8_functions), + .mux_bits = 8, + .reg_stride = 4, + .load_pinctrl = false, +}; + +static int ph1_sld8_pinctrl_probe(struct udevice *dev) +{ + return uniphier_pinctrl_probe(dev, &ph1_sld8_pinctrl_socdata); +} + +static const struct udevice_id ph1_sld8_pinctrl_match[] = { + { .compatible = "socionext,ph1-sld8-pinctrl" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(ph1_sld8_pinctrl) = { + .name = "ph1-sld8-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(ph1_sld8_pinctrl_match), + .probe = ph1_sld8_pinctrl_probe, + .remove = uniphier_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv), + .ops = &uniphier_pinctrl_ops, +};

Add pin configuration and pinmux support for UniPhier ProXstream2 SoC.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---

Changes in v2: - Add input-enable settings - Sync pin-mux table with Linux pinctrl driver

drivers/pinctrl/uniphier/Kconfig | 6 ++ drivers/pinctrl/uniphier/Makefile | 1 + drivers/pinctrl/uniphier/pinctrl-proxstream2.c | 140 +++++++++++++++++++++++++ 3 files changed, 147 insertions(+) create mode 100644 drivers/pinctrl/uniphier/pinctrl-proxstream2.c

diff --git a/drivers/pinctrl/uniphier/Kconfig b/drivers/pinctrl/uniphier/Kconfig index 9d3065d..7f729b6 100644 --- a/drivers/pinctrl/uniphier/Kconfig +++ b/drivers/pinctrl/uniphier/Kconfig @@ -27,4 +27,10 @@ config PINCTRL_UNIPHIER_PH1_PRO5 default y select PINCTRL_UNIPHIER_CORE

+config PINCTRL_UNIPHIER_PROXSTREAM2 + bool "UniPhier ProXstream2 SoC pinctrl driver" + depends on MACH_PROXSTREAM2 + default y + select PINCTRL_UNIPHIER_CORE + endif diff --git a/drivers/pinctrl/uniphier/Makefile b/drivers/pinctrl/uniphier/Makefile index b0cd3e8..aed038c 100644 --- a/drivers/pinctrl/uniphier/Makefile +++ b/drivers/pinctrl/uniphier/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_PRO5) += pinctrl-ph1-pro5.o +obj-$(CONFIG_PINCTRL_UNIPHIER_PROXSTREAM2) += pinctrl-proxstream2.o diff --git a/drivers/pinctrl/uniphier/pinctrl-proxstream2.c b/drivers/pinctrl/uniphier/pinctrl-proxstream2.c new file mode 100644 index 0000000..aefd61f --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-proxstream2.c @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2015 Masahiro Yamada yamada.masahiro@socionext.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-uniphier.h" + +static const struct uniphier_pinctrl_pin proxstream2_pins[] = { + UNIPHIER_PINCTRL_PIN(113, 0), + UNIPHIER_PINCTRL_PIN(114, 0), + UNIPHIER_PINCTRL_PIN(115, 0), + UNIPHIER_PINCTRL_PIN(116, 0), +}; + +static const unsigned emmc_pins[] = {36, 37, 38, 39, 40, 41, 42}; +static const unsigned emmc_muxvals[] = {9, 9, 9, 9, 9, 9, 9}; +static const unsigned emmc_dat8_pins[] = {43, 44, 45, 46}; +static const unsigned emmc_dat8_muxvals[] = {9, 9, 9, 9}; +static const unsigned i2c0_pins[] = {109, 110}; +static const unsigned i2c0_muxvals[] = {8, 8}; +static const unsigned i2c1_pins[] = {111, 112}; +static const unsigned i2c1_muxvals[] = {8, 8}; +static const unsigned i2c2_pins[] = {171, 172}; +static const unsigned i2c2_muxvals[] = {8, 8}; +static const unsigned i2c3_pins[] = {159, 160}; +static const unsigned i2c3_muxvals[] = {8, 8}; +static const unsigned i2c5_pins[] = {183, 184}; +static const unsigned i2c5_muxvals[] = {11, 11}; +static const unsigned i2c6_pins[] = {185, 186}; +static const unsigned i2c6_muxvals[] = {11, 11}; +static const unsigned nand_pins[] = {30, 31, 32, 33, 34, 35, 36, 39, 40, 41, + 42, 43, 44, 45, 46}; +static const unsigned nand_muxvals[] = {8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8}; +static const unsigned nand_cs1_pins[] = {37, 38}; +static const unsigned nand_cs1_muxvals[] = {8, 8}; +static const unsigned uart0_pins[] = {217, 218}; +static const unsigned uart0_muxvals[] = {8, 8}; +static const unsigned uart0b_pins[] = {179, 180}; +static const unsigned uart0b_muxvals[] = {10, 10}; +static const unsigned uart1_pins[] = {115, 116}; +static const unsigned uart1_muxvals[] = {8, 8}; +static const unsigned uart2_pins[] = {113, 114}; +static const unsigned uart2_muxvals[] = {8, 8}; +static const unsigned uart3_pins[] = {219, 220}; +static const unsigned uart3_muxvals[] = {8, 8}; +static const unsigned uart3b_pins[] = {181, 182}; +static const unsigned uart3b_muxvals[] = {10, 10}; +static const unsigned usb0_pins[] = {56, 57}; +static const unsigned usb0_muxvals[] = {8, 8}; +static const unsigned usb1_pins[] = {58, 59}; +static const unsigned usb1_muxvals[] = {8, 8}; +static const unsigned usb2_pins[] = {60, 61}; +static const unsigned usb2_muxvals[] = {8, 8}; +static const unsigned usb3_pins[] = {62, 63}; +static const unsigned usb3_muxvals[] = {8, 8}; +static const unsigned sd_pins[] = {47, 48, 49, 50, 51, 52, 53, 54, 55}; +static const unsigned sd_muxvals[] = {8, 8, 8, 8, 8, 8, 8, 8, 8}; + +static const struct uniphier_pinctrl_group proxstream2_groups[] = { + UNIPHIER_PINCTRL_GROUP(emmc), + UNIPHIER_PINCTRL_GROUP(emmc_dat8), + UNIPHIER_PINCTRL_GROUP(i2c0), + UNIPHIER_PINCTRL_GROUP(i2c1), + UNIPHIER_PINCTRL_GROUP(i2c2), + UNIPHIER_PINCTRL_GROUP(i2c3), + UNIPHIER_PINCTRL_GROUP(i2c5), + UNIPHIER_PINCTRL_GROUP(i2c6), + UNIPHIER_PINCTRL_GROUP(nand), + UNIPHIER_PINCTRL_GROUP(nand_cs1), + UNIPHIER_PINCTRL_GROUP(uart0), + UNIPHIER_PINCTRL_GROUP(uart0b), + UNIPHIER_PINCTRL_GROUP(uart1), + UNIPHIER_PINCTRL_GROUP(uart2), + UNIPHIER_PINCTRL_GROUP(uart3), + UNIPHIER_PINCTRL_GROUP(uart3b), + UNIPHIER_PINCTRL_GROUP(usb0), + UNIPHIER_PINCTRL_GROUP(usb1), + UNIPHIER_PINCTRL_GROUP(usb2), + UNIPHIER_PINCTRL_GROUP(usb3), + UNIPHIER_PINCTRL_GROUP(sd), +}; + +static const char * const proxstream2_functions[] = { + "emmc", + "i2c0", + "i2c1", + "i2c2", + "i2c3", + "i2c5", + "i2c6", + "nand", + "uart0", + "uart0b", + "uart1", + "uart2", + "uart3", + "uart3b", + "usb0", + "usb1", + "usb2", + "usb3", + "sd", +}; + +static struct uniphier_pinctrl_socdata proxstream2_pinctrl_socdata = { + .pins = proxstream2_pins, + .pins_count = ARRAY_SIZE(proxstream2_pins), + .groups = proxstream2_groups, + .groups_count = ARRAY_SIZE(proxstream2_groups), + .functions = proxstream2_functions, + .functions_count = ARRAY_SIZE(proxstream2_functions), + .mux_bits = 8, + .reg_stride = 4, + .load_pinctrl = false, +}; + +static int proxstream2_pinctrl_probe(struct udevice *dev) +{ + return uniphier_pinctrl_probe(dev, &proxstream2_pinctrl_socdata); +} + +static const struct udevice_id proxstream2_pinctrl_match[] = { + { .compatible = "socionext,proxstream2-pinctrl" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(proxstream2_pinctrl) = { + .name = "proxstream2-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(proxstream2_pinctrl_match), + .probe = proxstream2_pinctrl_probe, + .remove = uniphier_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv), + .ops = &uniphier_pinctrl_ops, +};

In UniPhier device trees, pinctrl device nodes are located under the simple-bus (AMBA).

This is needed to bind pinctrl devices in SPL.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---

Changes in v2: None

configs/ph1_ld4_defconfig | 1 + configs/ph1_pro4_defconfig | 1 + configs/ph1_sld8_defconfig | 1 + 3 files changed, 3 insertions(+)

diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index 56c215f..74e759a 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -17,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_CMD_TIME=y # CONFIG_CMD_MISC is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_SIMPLE_BUS=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index 7624c54..714339a 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -16,6 +16,7 @@ CONFIG_CMD_PING=y CONFIG_CMD_TIME=y # CONFIG_CMD_MISC is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_SIMPLE_BUS=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index 1a35a77..df0e005 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -17,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_CMD_TIME=y # CONFIG_CMD_MISC is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_SIMPLE_BUS=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8

Add "u-boot,dm-pre-reloc" for device nodes we want in SPL DTB (spl/u-boot-spl.dtb).

The "soc" node (this is simple-bus node) also needs the property to bind the pinctrl node located under it.

I am collecting this U-Boot specific hack to the bottom of board DTS rather than inserting "u-boot,dm-pre-reloc" into SoC DTSI. My goal is to sync DTSI with Linux for easier maintenance.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Reviewed-by: Simon Glass sjg@chromium.org ---

Changes in v2: None

arch/arm/dts/uniphier-ph1-ld4-ref.dts | 16 +++++++++++++++- arch/arm/dts/uniphier-ph1-ld6b-ref.dts | 16 +++++++++++++++- arch/arm/dts/uniphier-ph1-pro4-ref.dts | 16 +++++++++++++++- arch/arm/dts/uniphier-ph1-sld8-ref.dts | 16 +++++++++++++++- 4 files changed, 60 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts index 20f2e9a..9d697c1 100644 --- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts @@ -61,6 +61,20 @@ };

/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts index 58dc20e..ca68930 100644 --- a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts @@ -54,6 +54,20 @@ };

/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts index ec1117d..a825069 100644 --- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts @@ -68,6 +68,20 @@ };

/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts index 6269f9a..2cfcaff 100644 --- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts @@ -65,6 +65,20 @@ };

/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; };

As the UniPhier serial driver had already switched to Drive Model and the pinctrl drivers are now enabled, these pin-muxing settings are properly handled by the pinctrl drivers.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Reviewed-by: Simon Glass sjg@chromium.org ---

Changes in v2: None

arch/arm/mach-uniphier/ph1-ld4/Makefile | 2 +- arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c | 27 ------------------------- arch/arm/mach-uniphier/ph1-pro4/Makefile | 2 +- arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c | 26 ------------------------ arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c | 27 ------------------------- arch/arm/mach-uniphier/spl.c | 5 +++++ 6 files changed, 7 insertions(+), 82 deletions(-) delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c

diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile index 1410b12..789820e 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/Makefile +++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile @@ -5,7 +5,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += bcu_init.o sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o + pll_spectrum.o umc_init.o ddrphy_init.o obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o else diff --git a/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c deleted file mode 100644 index e5e86bb..0000000 --- a/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */ - sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */ - - sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */ - sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */ - - sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */ - sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile index 229f443..7fdb36a 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/Makefile +++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile @@ -5,7 +5,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o + pll_spectrum.o umc_init.o ddrphy_init.o obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o else diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c deleted file mode 100644 index e78d6ab..0000000 --- a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada yamada.masahiro@socionext.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */ - sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */ - sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */ - sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */ - sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */ - sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */ - sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */ -#endif - - writel(1, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c deleted file mode 100644 index 28cc429..0000000 --- a/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */ - sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */ - - sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */ - - sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */ - sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif -} diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c index a34d3a1..86764bc 100644 --- a/arch/arm/mach-uniphier/spl.c +++ b/arch/arm/mach-uniphier/spl.c @@ -15,6 +15,11 @@ void __weak bcu_init(void) { }; + +void __weak early_pin_init(void) +{ +}; + void sbc_init(void); void sg_init(void); void pll_init(void);

Historically (for compatibility with very old platforms), two different types of micro support cards have been used with the UniPhier SoC development boards. It has been painful to maintain both. Having one of them is enough.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Reviewed-by: Simon Glass sjg@chromium.org ---

Changes in v2: None

arch/arm/mach-uniphier/Kconfig | 23 ++----- arch/arm/mach-uniphier/Makefile | 3 +- arch/arm/mach-uniphier/include/mach/board.h | 6 +- arch/arm/mach-uniphier/ph1-ld4/Makefile | 3 +- arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c | 49 --------------- arch/arm/mach-uniphier/ph1-pro4/Makefile | 3 +- arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c | 42 ------------- arch/arm/mach-uniphier/ph1-sld3/Makefile | 3 +- arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c | 37 ----------- arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c | 57 ----------------- arch/arm/mach-uniphier/support_card.c | 87 +++----------------------- configs/ph1_ld4_defconfig | 2 +- configs/ph1_pro4_defconfig | 2 +- configs/ph1_sld3_defconfig | 2 +- configs/ph1_sld8_defconfig | 2 +- include/configs/uniphier.h | 19 ++---- 16 files changed, 29 insertions(+), 311 deletions(-) delete mode 100644 arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c delete mode 100644 arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c delete mode 100644 arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c

diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 7b49ad3..28d574f 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -26,29 +26,14 @@ config MACH_PH1_SLD8

endchoice

-choice - prompt "UniPhier Support Card select" - optional - -config PFC_MICRO_SUPPORT_CARD - bool "Support card with PFC CPLD" - help - This option provides support for the expansion board with PFC - original address mapping. - - Say Y to use the on-board UART, Ether, LED devices. - -config DCC_MICRO_SUPPORT_CARD - bool "Support card with DCC CPLD" +config MICRO_SUPPORT_CARD + bool "Use Micro Support Card" help - This option provides support for the expansion board with DCC- - arranged address mapping that is compatible with legacy UniPhier - reference boards. + This option provides support for the expansion board, available + on some UniPhier reference boards.

Say Y to use the on-board UART, Ether, LED devices.

-endchoice - config CMD_PINMON bool "Enable boot mode pins monitor command" default y diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 103db6d..5f17557 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -29,8 +29,7 @@ endif

obj-y += timer.o

-obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += support_card.o

obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/ obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ diff --git a/arch/arm/mach-uniphier/include/mach/board.h b/arch/arm/mach-uniphier/include/mach/board.h index e3cba5b..c039d80 100644 --- a/arch/arm/mach-uniphier/include/mach/board.h +++ b/arch/arm/mach-uniphier/include/mach/board.h @@ -1,6 +1,5 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada yamada.m@jp.panasonic.com + * Copyright (C) 2012-2015 Masahiro Yamada yamada.masahiro@socionext.com * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,8 +7,7 @@ #ifndef ARCH_BOARD_H #define ARCH_BOARD_H

-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) || \ - defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +#if defined(CONFIG_MICRO_SUPPORT_CARD) void support_card_reset(void); void support_card_init(void); void support_card_late_init(void); diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile index 0c198c6..4a2c944 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/Makefile +++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile @@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += bcu_init.o pll_init.o early_clkrst_init.o \ pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o endif diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c deleted file mode 100644 index 5b5958b..0000000 --- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada yamada.masahiro@socionext.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE3); - - /* enable access to sub memory when boot swap is on */ - if (boot_is_swapped()) - sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ - - sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */ -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile index afd9235..a52b5aa 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/Makefile +++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile @@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += pll_init.o early_clkrst_init.o \ pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o endif diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c deleted file mode 100644 index 877ba79..0000000 --- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada yamada.masahiro@socionext.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0400bc01, SBBASE1); /* sub memory */ - writel(0x0800bf01, SBBASE3); /* peripherals */ - - /* enable access to sub memory when boot swap is on */ - if (boot_is_swapped()) - sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ - - sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ - writel(0x00000001, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile index aff5d64..e3cb39f 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/Makefile +++ b/arch/arm/mach-uniphier/ph1-sld3/Makefile @@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \ early_pinctrl.o pll_spectrum.o umc_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o endif diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c deleted file mode 100644 index f5e2446..0000000 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada yamada.masahiro@socionext.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - /* only address/data multiplex mode is supported */ - - /* XECS0 : boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL02); - - /* XECS1 : sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); - - /* XECS2 : peripherals */ - writel(SBCTRL0_ADMULTIPLX_PERI_VALUE, SBCTRL20); - writel(SBCTRL1_ADMULTIPLX_PERI_VALUE, SBCTRL21); - writel(SBCTRL2_ADMULTIPLX_PERI_VALUE, SBCTRL22); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE2); - - sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c deleted file mode 100644 index c2267c7..0000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada yamada.masahiro@socionext.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* - * SBCTRL0* does not need settings because PH1-sLD8 has no support for - * XECS0. The boot swap must be enabled to boot from the support card. - */ - - if (boot_is_swapped()) { - /* XECS1 : boot memory if boot swap is on */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - } - - /* XECS4 : sub memory */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44); - - /* XECS5 : peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0900bfff, SBBASE1); /* dummy */ - writel(0x0400bc01, SBBASE4); /* sub memory */ - writel(0x0800bf01, SBBASE5); /* peripherals */ - - sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */ - sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */ - - /* dummy read to assure write process */ - readl(SG_PINCTRL(0)); -} diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c index ea85b20..4ca6ffe 100644 --- a/arch/arm/mach-uniphier/support_card.c +++ b/arch/arm/mach-uniphier/support_card.c @@ -8,11 +8,9 @@ #include <linux/io.h> #include <mach/board.h>

-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - -#define PFC_MICRO_SUPPORT_CARD_RESET \ +#define MICRO_SUPPORT_CARD_RESET \ ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) -#define PFC_MICRO_SUPPORT_CARD_REVISION \ +#define MICRO_SUPPORT_CARD_REVISION \ ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) /* * 0: reset deassert, 1: reset @@ -22,65 +20,22 @@ */ void support_card_reset_deassert(void) { - writel(0, PFC_MICRO_SUPPORT_CARD_RESET); + writel(0, MICRO_SUPPORT_CARD_RESET); }

void support_card_reset(void) { - writel(3, PFC_MICRO_SUPPORT_CARD_RESET); + writel(3, MICRO_SUPPORT_CARD_RESET); }

static int support_card_show_revision(void) { u32 revision;

- revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION); - printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf); + revision = readl(MICRO_SUPPORT_CARD_REVISION); + printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf); return 0; } -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) - -#define DCC_MICRO_SUPPORT_CARD_RESET_LAN \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300) -#define DCC_MICRO_SUPPORT_CARD_RESET_UART \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304) -#define DCC_MICRO_SUPPORT_CARD_RESET_I2C \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308) -#define DCC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0) - -void support_card_reset_deassert(void) -{ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -void support_card_reset(void) -{ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -static int support_card_show_revision(void) -{ - u32 revision; - - revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION); - - if (revision >= 0x67) { - printf("(DCC CPLD version 3.%d.%d)\n", - revision >> 4, revision & 0xf); - return 0; - } else { - printf("(DCC CPLD unknown version)\n"); - return -1; - } -} -#endif

int check_support_card(void) { @@ -146,28 +101,11 @@ static int mem_is_flash(const struct memory_bank *mem) return ret; }

-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - /* {address, size} */ -static const struct memory_bank memory_banks_boot_swap_off[] = { +/* {address, size} */ +static const struct memory_bank memory_banks[] = { {0x02000000, 0x01f00000}, };

-static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x01f00000}, -}; -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x04000000, 0x02000000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x02000000}, - {0x04000000, 0x02000000}, -}; -#endif - static const struct memory_bank *flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];

@@ -187,13 +125,8 @@ static void detect_num_flash_banks(void)

cfi_flash_num_flash_banks = 0;

- if (boot_is_swapped()) { - memory_bank = memory_banks_boot_swap_on; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); - } else { - memory_bank = memory_banks_boot_swap_off; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); - } + memory_bank = memory_banks; + end = memory_bank + ARRAY_SIZE(memory_banks);

for (; memory_bank < end; memory_bank++) { if (cfi_flash_num_flash_banks >= diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index 13b124b..e9744a3 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_MACH_PH1_LD4=y -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref" CONFIG_HUSH_PARSER=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index 0982d91..1b3092d 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref" CONFIG_HUSH_PARSER=y diff --git a/configs/ph1_sld3_defconfig b/configs/ph1_sld3_defconfig index d495132..df908e2 100644 --- a/configs/ph1_sld3_defconfig +++ b/configs/ph1_sld3_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y CONFIG_MACH_PH1_SLD3=y -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld3-ref" CONFIG_HUSH_PARSER=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index 584c41a..8151562 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_MACH_PH1_SLD8=y -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref" CONFIG_HUSH_PARSER=y diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index d59564b..7316046 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -62,19 +62,10 @@ /* * Support card address map */ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) -# define CONFIG_SUPPORT_CARD_BASE 0x03f00000 -# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) -# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000) -# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000) -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# define CONFIG_SUPPORT_CARD_BASE 0x08000000 -# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) -# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00401630) -# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000) -#endif +#define CONFIG_SUPPORT_CARD_BASE 0x03f00000 +#define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) +#define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000) +#define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000)

#ifdef CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550 @@ -140,7 +131,7 @@

#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */

-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2 +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1

/* serial console configuration */ #define CONFIG_BAUDRATE 115200

In UniPhier SoCs before ProXstream2 and PH1-LD6b, two address spaces 0x00000000 - 0x0fffffff 0x40000000 - 0x4fffffff are both mapped to the external bus (also called system bus), so either was OK.

In the newest two SoCs, the former (0x00000000 - 0x0fffffff) is assigned for the serial NOR interface.

Going forward, use the latter for the external bus.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Reviewed-by: Simon Glass sjg@chromium.org ---

Changes in v2: None

arch/arm/mach-uniphier/ph1-ld4/sbc_init.c | 12 ++++++------ arch/arm/mach-uniphier/ph1-pro4/sbc_init.c | 12 ++++++------ arch/arm/mach-uniphier/ph1-sld3/sbc_init.c | 12 ++++++------ arch/arm/mach-uniphier/support_card.c | 2 +- include/configs/uniphier.h | 7 ++++++- 5 files changed, 25 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c index 8e25792..4435a47 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c +++ b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c @@ -30,18 +30,18 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c index 533739c..685f9c7 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c +++ b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c @@ -23,18 +23,18 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c index d66f89e..bafab4b 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c +++ b/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c @@ -24,18 +24,18 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c index 4ca6ffe..ef4576d 100644 --- a/arch/arm/mach-uniphier/support_card.c +++ b/arch/arm/mach-uniphier/support_card.c @@ -103,7 +103,7 @@ static int mem_is_flash(const struct memory_bank *mem)

/* {address, size} */ static const struct memory_bank memory_banks[] = { - {0x02000000, 0x01f00000}, + {0x42000000, 0x01f00000}, };

static const struct memory_bank diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 7316046..45b39c0 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -62,7 +62,7 @@ /* * Support card address map */ -#define CONFIG_SUPPORT_CARD_BASE 0x03f00000 +#define CONFIG_SUPPORT_CARD_BASE 0x43f00000 #define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) #define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000) #define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000) @@ -240,6 +240,7 @@ "fit_addr_r=0x84100000\0" \ "fit_size=0x00f00000\0" \ "norboot=run add_default_bootargs &&" \ + "setexpr fit_addr $nor_base + $fit_addr &&" \ "bootm $fit_addr\0" \ "nandboot=run add_default_bootargs &&" \ "nand read $fit_addr_r $fit_addr $fit_size &&" \ @@ -262,6 +263,9 @@ "ramdisk_size=0x00600000\0" \ "ramdisk_file=rootfs.cpio.uboot\0" \ "norboot=run add_default_bootargs &&" \ + "setexpr kernel_addr $nor_base + $kernel_addr &&" \ + "setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \ + "setexpr fdt_addr $nor_base + $fdt_addr &&" \ "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \ "nandboot=run add_default_bootargs &&" \ "nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ @@ -278,6 +282,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "verify=n\0" \ + "norbase=0x42000000\0" \ "nandupdate=nand erase 0 0x00100000 &&" \ "tftpboot u-boot-spl-dtb.bin &&" \ "nand write $loadaddr 0 0x00010000 &&" \

Device tree specifies the available memory ranges in its "/memory" node. Use it to simplify the CONFIG defines.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---

Changes in v2: None

arch/arm/mach-uniphier/board_common.c | 12 --------- arch/arm/mach-uniphier/dram_init.c | 51 ++++++++++++++++++++++++++++++++--- include/configs/uniphier.h | 11 +------- 3 files changed, 48 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-uniphier/board_common.c b/arch/arm/mach-uniphier/board_common.c index 5f2d5f6..967fa6c 100644 --- a/arch/arm/mach-uniphier/board_common.c +++ b/arch/arm/mach-uniphier/board_common.c @@ -18,15 +18,3 @@ int board_init(void)

return 0; } - -#if CONFIG_NR_DRAM_BANKS >= 2 -void dram_init_banksize(void) -{ - DECLARE_GLOBAL_DATA_PTR; - - gd->bd->bi_dram[0].start = CONFIG_SDRAM0_BASE; - gd->bd->bi_dram[0].size = CONFIG_SDRAM0_SIZE; - gd->bd->bi_dram[1].start = CONFIG_SDRAM1_BASE; - gd->bd->bi_dram[1].size = CONFIG_SDRAM1_SIZE; -} -#endif diff --git a/arch/arm/mach-uniphier/dram_init.c b/arch/arm/mach-uniphier/dram_init.c index 4b8c938..32cc448 100644 --- a/arch/arm/mach-uniphier/dram_init.c +++ b/arch/arm/mach-uniphier/dram_init.c @@ -1,16 +1,59 @@ /* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada yamada.m@jp.panasonic.com + * Copyright (C) 2012-2015 Masahiro Yamada yamada.masahiro@socionext.com * * SPDX-License-Identifier: GPL-2.0+ */

#include <common.h> +#include <libfdt.h> +#include <linux/err.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const void *get_memory_reg_prop(const void *fdt, int *lenp) +{ + int offset; + + offset = fdt_path_offset(fdt, "/memory"); + if (offset < 0) + return NULL; + + return fdt_getprop(fdt, offset, "reg", lenp); +}

int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + const fdt32_t *val; + int len; + + val = get_memory_reg_prop(gd->fdt_blob, &len); + if (len < sizeof(*val)) + return -EINVAL; + + gd->ram_size = fdt32_to_cpu(*(val + 1)); + + debug("DRAM size = %08lx\n", gd->ram_size);

return 0; } + +void dram_init_banksize(void) +{ + const fdt32_t *val; + int len, i; + + val = get_memory_reg_prop(gd->fdt_blob, &len); + if (len < 0) + return; + + len /= sizeof(*val); + len /= 2; + + for (i = 0; i < len; i++) { + gd->bd->bi_dram[i].start = fdt32_to_cpu(*val++); + gd->bd->bi_dram[i].size = fdt32_to_cpu(*val++); + + debug("DRAM bank %d: start = %08lx, size = %08lx\n", + i, gd->bd->bi_dram[i].start, gd->bd->bi_dram[i].size); + } +} diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 45b39c0..a15838b 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -295,17 +295,8 @@ /* Open Firmware flat tree */ #define CONFIG_OF_LIBFDT

-/* Memory Size & Mapping */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SDRAM0_BASE - -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE -/* Thre is no memory hole */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE) -#else +#define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE) -#endif

#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \ defined(CONFIG_MACH_PH1_SLD8)