Dear Albert Aribaud,

The following changes since commit c45272e25bdf241fbb27638465f16ce2342ed1b6:

i.MX6 USDHC: Use the ESDHC clock (2012-07-02 19:53:20 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-atmel.git master

for you to fetch changes up to dc72466bd1a1c15f31c92f77e0df6f533a658ccc:

AT91SAM9*: Change kernel address in dataflash to match u-boot's size (2012-07-05 11:38:42 +0200)

---------------------------------------------------------------- Alexandre Belloni (1): AT91SAM9*: Change kernel address in dataflash to match u-boot's size

Andreas Bießmann (1): ehci-atmel: fix compiler warning

Bo Shen (3): Atmel : usb : add EHCI driver for Atmel SoC AT91: at91sam9m10g45ek : Enable EHCI instead OHCI ATMEL/PIO: Enable new feature of PIO on Atmel device

esw@bus-elektronik.de (2): Fix: broken boot message at serial line on AT91SAM9263-EK board Fix: AT91SAM9263 nor flash usage

arch/arm/include/asm/arch-at91/at91_pio.h | 45 ++++++++++- board/atmel/at91sam9260ek/partition.c | 6 +- board/atmel/at91sam9261ek/partition.c | 6 +- board/atmel/at91sam9263ek/at91sam9263ek.c | 2 +- board/atmel/at91sam9263ek/partition.c | 6 +- board/atmel/at91sam9rlek/partition.c | 6 +- drivers/gpio/at91_gpio.c | 125 ++++++++++++++++++++++++++++- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-atmel.c | 89 ++++++++++++++++++++ include/configs/at91sam9260ek.h | 5 +- include/configs/at91sam9261ek.h | 5 +- include/configs/at91sam9263ek.h | 10 ++- include/configs/at91sam9m10g45ek.h | 20 +---- include/configs/at91sam9rlek.h | 3 +- 14 files changed, 288 insertions(+), 41 deletions(-) create mode 100644 drivers/usb/host/ehci-atmel.c