[U-Boot] [PATCH] mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs
commit 54652991 Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips
fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads to problems for smaller versions of this chip e.g. the 32Mbit version with deviceid 0x16 on mgcoge. So move the code for this work around to an own function and check previously manufacturer id and device id to not break support for other flashes where this work around is not needed.
Signed-off-by: Holger Brunck holger.brunck@keymile.com Signed-off-by: Heiko Schocher hs@denx.de cc: Stefan Roese sr@denx.de cc: Philippe De Muyter phdm@macqel.be cc: Gerlando Falauto gerlando.falauto@keymile.com --- drivers/mtd/cfi_flash.c | 70 +++++++++++++++++++++++++++++++--------------- 1 files changed, 47 insertions(+), 23 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 35294bc..690748d 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1391,6 +1391,43 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) */ #ifdef CONFIG_SYS_FLASH_PROTECTION
+#define INTEL_COMPAT 0x89 +#define DEV_ID_NUMONYX_256MBIT 0x8922 + +static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot) +{ + if ((info->manufacturer_id == INTEL_COMPAT) && + (info->device_id == DEV_ID_NUMONYX_256MBIT)) { + /* + * see errata called + * "Numonyx Axcell P33/P30 Specification Update" :) + */ + flash_write_cmd(info, sector, 0, FLASH_CMD_READ_ID); + if (!flash_isequal(info, sector, FLASH_OFFSET_PROTECT, + prot)) { + /* + * cmd must come before FLASH_CMD_PROTECT + 20us + * Disable interrupts which might cause a timeout here. + */ + int flag = disable_interrupts(); + unsigned short cmd; + + if (prot) + cmd = FLASH_CMD_PROTECT_SET; + else + cmd = FLASH_CMD_PROTECT_CLEAR; + flash_write_cmd(info, sector, 0, + FLASH_CMD_PROTECT); + flash_write_cmd(info, sector, 0, cmd); + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + } + return 1; + } + return 0; +} + int flash_real_protect (flash_info_t * info, long sector, int prot) { int retcode = 0; @@ -1399,31 +1436,18 @@ int flash_real_protect (flash_info_t * info, long sector, int prot) case CFI_CMDSET_INTEL_PROG_REGIONS: case CFI_CMDSET_INTEL_STANDARD: case CFI_CMDSET_INTEL_EXTENDED: - /* - * see errata called - * "Numonyx Axcell P33/P30 Specification Update" :) - */ - flash_write_cmd (info, sector, 0, FLASH_CMD_READ_ID); - if (!flash_isequal (info, sector, FLASH_OFFSET_PROTECT, - prot)) { - /* - * cmd must come before FLASH_CMD_PROTECT + 20us - * Disable interrupts which might cause a timeout here. - */ - int flag = disable_interrupts (); - unsigned short cmd; - + if (!cfi_protect_bugfix(info, sector, prot)) { + flash_write_cmd(info, sector, 0, + FLASH_CMD_CLEAR_STATUS); + flash_write_cmd(info, sector, 0, + FLASH_CMD_PROTECT); if (prot) - cmd = FLASH_CMD_PROTECT_SET; + flash_write_cmd(info, sector, 0, + FLASH_CMD_PROTECT_SET); else - cmd = FLASH_CMD_PROTECT_CLEAR; - - flash_write_cmd (info, sector, 0, - FLASH_CMD_PROTECT); - flash_write_cmd (info, sector, 0, cmd); - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); + flash_write_cmd(info, sector, 0, + FLASH_CMD_PROTECT_CLEAR); + } break; case CFI_CMDSET_AMD_EXTENDED:
Hi Holger,
thanks for this patch. I do have a minor comment though below.
On 08/08/2012 04:52 PM, Holger Brunck wrote:
commit 54652991 Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips
fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads to problems for smaller versions of this chip e.g. the 32Mbit version with deviceid 0x16 on mgcoge. So move the code for this work around to an own function and check previously manufacturer id and device id to not break support for other flashes where this work around is not needed.
Signed-off-by: Holger Brunck holger.brunck@keymile.com Signed-off-by: Heiko Schocher hs@denx.de cc: Stefan Roese sr@denx.de cc: Philippe De Muyter phdm@macqel.be cc: Gerlando Falauto gerlando.falauto@keymile.com
drivers/mtd/cfi_flash.c | 70 +++++++++++++++++++++++++++++++--------------- 1 files changed, 47 insertions(+), 23 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 35294bc..690748d 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1391,6 +1391,43 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) */ #ifdef CONFIG_SYS_FLASH_PROTECTION
+#define INTEL_COMPAT 0x89 +#define DEV_ID_NUMONYX_256MBIT 0x8922
Adding defines in the middle of the source is frowned upon.
Why don't you use INTEL_MANUFACT from flash.h instead. And add the device id in this header as well? I would prefer this.
Thanks, Stefan
Hi Stefan,
On 08/09/2012 08:09 AM, Stefan Roese wrote:
On 08/08/2012 04:52 PM, Holger Brunck wrote:
commit 54652991 Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips
fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads to problems for smaller versions of this chip e.g. the 32Mbit version with deviceid 0x16 on mgcoge. So move the code for this work around to an own function and check previously manufacturer id and device id to not break support for other flashes where this work around is not needed.
Signed-off-by: Holger Brunck holger.brunck@keymile.com Signed-off-by: Heiko Schocher hs@denx.de cc: Stefan Roese sr@denx.de cc: Philippe De Muyter phdm@macqel.be cc: Gerlando Falauto gerlando.falauto@keymile.com
drivers/mtd/cfi_flash.c | 70 +++++++++++++++++++++++++++++++--------------- 1 files changed, 47 insertions(+), 23 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 35294bc..690748d 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1391,6 +1391,43 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) */ #ifdef CONFIG_SYS_FLASH_PROTECTION
+#define INTEL_COMPAT 0x89 +#define DEV_ID_NUMONYX_256MBIT 0x8922
Adding defines in the middle of the source is frowned upon.
Why don't you use INTEL_MANUFACT from flash.h instead. And add the device id in this header as well? I would prefer this.
agreed, I'll prepare a v2. Thanks.
Regards Holger
commit 54652991 Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips
fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads to problems for smaller versions of this chip e.g. the 32Mbit version with deviceid 0x16 on mgcoge. So move the code for this work around to an own function and check previously manufacturer id and device id to not break other flashes which don't need this work around.
Signed-off-by: Holger Brunck holger.brunck@keymile.com Signed-off-by: Heiko Schocher hs@denx.de cc: Stefan Roese sr@denx.de cc: Philippe De Muyter phdm@macqel.be cc: Gerlando Falauto gerlando.falauto@keymile.com --- changes for v2: - use existing INTEL_MANUFACT from flash.h and add device id for NUMONYX_256MBIT
drivers/mtd/cfi_flash.c | 67 ++++++++++++++++++++++++++++++---------------- include/flash.h | 1 + 2 files changed, 45 insertions(+), 23 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 35294bc..75acaf6 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1391,6 +1391,40 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) */ #ifdef CONFIG_SYS_FLASH_PROTECTION
+static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot) +{ + if ((info->manufacturer_id == (uchar)INTEL_MANUFACT) && + (info->device_id == NUMONYX_256MBIT)) { + /* + * see errata called + * "Numonyx Axcell P33/P30 Specification Update" :) + */ + flash_write_cmd(info, sector, 0, FLASH_CMD_READ_ID); + if (!flash_isequal(info, sector, FLASH_OFFSET_PROTECT, + prot)) { + /* + * cmd must come before FLASH_CMD_PROTECT + 20us + * Disable interrupts which might cause a timeout here. + */ + int flag = disable_interrupts(); + unsigned short cmd; + + if (prot) + cmd = FLASH_CMD_PROTECT_SET; + else + cmd = FLASH_CMD_PROTECT_CLEAR; + flash_write_cmd(info, sector, 0, + FLASH_CMD_PROTECT); + flash_write_cmd(info, sector, 0, cmd); + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + } + return 1; + } + return 0; +} + int flash_real_protect (flash_info_t * info, long sector, int prot) { int retcode = 0; @@ -1399,31 +1433,18 @@ int flash_real_protect (flash_info_t * info, long sector, int prot) case CFI_CMDSET_INTEL_PROG_REGIONS: case CFI_CMDSET_INTEL_STANDARD: case CFI_CMDSET_INTEL_EXTENDED: - /* - * see errata called - * "Numonyx Axcell P33/P30 Specification Update" :) - */ - flash_write_cmd (info, sector, 0, FLASH_CMD_READ_ID); - if (!flash_isequal (info, sector, FLASH_OFFSET_PROTECT, - prot)) { - /* - * cmd must come before FLASH_CMD_PROTECT + 20us - * Disable interrupts which might cause a timeout here. - */ - int flag = disable_interrupts (); - unsigned short cmd; - + if (!cfi_protect_bugfix(info, sector, prot)) { + flash_write_cmd(info, sector, 0, + FLASH_CMD_CLEAR_STATUS); + flash_write_cmd(info, sector, 0, + FLASH_CMD_PROTECT); if (prot) - cmd = FLASH_CMD_PROTECT_SET; + flash_write_cmd(info, sector, 0, + FLASH_CMD_PROTECT_SET); else - cmd = FLASH_CMD_PROTECT_CLEAR; - - flash_write_cmd (info, sector, 0, - FLASH_CMD_PROTECT); - flash_write_cmd (info, sector, 0, cmd); - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); + flash_write_cmd(info, sector, 0, + FLASH_CMD_PROTECT_CLEAR); + } break; case CFI_CMDSET_AMD_EXTENDED: diff --git a/include/flash.h b/include/flash.h index 0ca70d9..e614d07 100644 --- a/include/flash.h +++ b/include/flash.h @@ -348,6 +348,7 @@ extern flash_info_t *flash_get_info(ulong base); #define TOSH_ID_FVT160 0xC2 /* TC58FVT160 ID (16 M, top ) */ #define TOSH_ID_FVB160 0x43 /* TC58FVT160 ID (16 M, bottom ) */ #define PHILIPS_LPC2292 0x0401FF13 /* LPC2292 internal FLASH */ +#define NUMONYX_256MBIT 0x8922 /* Numonyx P33/30 256MBit 65nm */
/*----------------------------------------------------------------------- * Internal FLASH identification codes
On 08/09/2012 10:22 AM, Holger Brunck wrote:
commit 54652991 Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips
fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads to problems for smaller versions of this chip e.g. the 32Mbit version with deviceid 0x16 on mgcoge. So move the code for this work around to an own function and check previously manufacturer id and device id to not break other flashes which don't need this work around.
Signed-off-by: Holger Brunck holger.brunck@keymile.com Signed-off-by: Heiko Schocher hs@denx.de cc: Stefan Roese sr@denx.de cc: Philippe De Muyter phdm@macqel.be cc: Gerlando Falauto gerlando.falauto@keymile.com
Applied to u-boot-cfi-flash/master. Thanks.
Best regards, Stefan
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office@denx.de
participants (2)
-
Holger Brunck -
Stefan Roese