The DRAM parameters are only used in the DRAM initialization stage in SPL.

When SPL is not built, these parameters are useless, so hide them.

Signed-off-by: Icenowy Zheng icenowy@aosc.io --- arch/arm/mach-sunxi/Kconfig | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 09cfec6f57..d944e7c015 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -273,6 +273,7 @@ config DRAM_TYPE

config DRAM_CLK int "sunxi dram clock speed" + depends on SPL default 792 if MACH_SUN9I default 648 if MACH_SUN8I_R40 default 312 if MACH_SUN6I || MACH_SUN8I @@ -295,6 +296,7 @@ endif

config DRAM_ZQ int "sunxi dram zq value" + depends on SPL default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I default 127 if MACH_SUN7I default 14779 if MACH_SUN8I_V3S @@ -306,6 +308,7 @@ config DRAM_ZQ

config DRAM_ODT_EN bool "sunxi dram odt enable" + depends on SPL default n if !MACH_SUN8I_A23 default y if MACH_SUN8I_A23 default y if MACH_SUN8I_R40

Allwinner H6 is a new SoC in the sun50i series, with Cortex-A53 cores and refactored memory map/CCU.

Add initial support for it, including initial MMC support.

The offset of the environment is moved to 0xe0000, which used to be the space reserved for Falcon mode in legacy u-boot-sunxi. This change will prevent the U-Boot space issue which happened on several sunxi boards.

Signed-off-by: Icenowy Zheng icenowy@aosc.io --- arch/arm/dts/sun50i-h6.dtsi | 140 ++++++++++++ arch/arm/include/asm/arch-sunxi/clock.h | 2 + arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h | 266 ++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/cpu.h | 2 + arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 73 ++++++ arch/arm/include/asm/arch-sunxi/gpio.h | 1 + arch/arm/include/asm/arch-sunxi/mmc.h | 2 +- arch/arm/include/asm/arch-sunxi/timer.h | 2 +- arch/arm/mach-sunxi/Kconfig | 7 + arch/arm/mach-sunxi/Makefile | 3 +- arch/arm/mach-sunxi/board.c | 6 +- arch/arm/mach-sunxi/clock_sun50i_h6.c | 39 ++++ arch/arm/mach-sunxi/cpu_info.c | 2 + board/sunxi/board.c | 2 +- drivers/mmc/sunxi_mmc.c | 11 + env/Kconfig | 3 +- include/configs/sun50i.h | 5 + include/configs/sunxi-common.h | 5 +- 18 files changed, 564 insertions(+), 7 deletions(-) create mode 100644 arch/arm/dts/sun50i-h6.dtsi create mode 100644 arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h create mode 100644 arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h create mode 100644 arch/arm/mach-sunxi/clock_sun50i_h6.c

diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi new file mode 100644 index 0000000000..50f9146318 --- /dev/null +++ b/arch/arm/dts/sun50i-h6.dtsi @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2017 Icenowy Zheng icenowy@aosc.io + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <1>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <3>; + }; + }; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + iosc: internal-osc-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + uart0: serial@5000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; /* placeholder */ + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index 3747f74d36..ecbef85f83 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -17,6 +17,8 @@ /* clock control module regs definition */ #if defined(CONFIG_MACH_SUN8I_A83T) #include <asm/arch/clock_sun8i_a83t.h> +#elif defined(CONFIG_MACH_SUN50I_H6) +#include <asm/arch/clock_sun50i_h6.h> #elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \ defined(CONFIG_MACH_SUN50I) #include <asm/arch/clock_sun6i.h> diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h new file mode 100644 index 0000000000..ade576932f --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h @@ -0,0 +1,266 @@ +/* + * Allwinner H6 clock register definitions + * + * (C) Copyright 2017 Icenowy Zheng icenowy@aosc.io + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CLOCK_SUN50I_H6_H +#define _SUNXI_CLOCK_SUN50I_H6_H + +struct sunxi_ccm_reg { + u32 pll1_cfg; /* 0x000 pll1 (cpux) control */ + u8 reserved_0x004[12]; + u32 pll5_cfg; /* 0x010 pll5 (ddr) control */ + u8 reserved_0x014[12]; + u32 pll6_cfg; /* 0x020 pll6 (periph0) control */ + u8 reserved_0x020[4]; + u32 pll_periph1_cfg; /* 0x028 pll periph1 control */ + u8 reserved_0x028[4]; + u32 pll7_cfg; /* 0x030 pll7 (gpu) control */ + u8 reserved_0x034[12]; + u32 pll3_cfg; /* 0x040 pll3 (video0) control */ + u8 reserved_0x044[4]; + u32 pll_video1_cfg; /* 0x048 pll video1 control */ + u8 reserved_0x04c[12]; + u32 pll4_cfg; /* 0x058 pll4 (ve) control */ + u8 reserved_0x05c[4]; + u32 pll10_cfg; /* 0x060 pll10 (de) control */ + u8 reserved_0x064[12]; + u32 pll9_cfg; /* 0x070 pll9 (hsic) control */ + u8 reserved_0x074[4]; + u32 pll2_cfg; /* 0x078 pll2 (audio) control */ + u8 reserved_0x07c[148]; + u32 pll5_pat; /* 0x110 pll5 (ddr) pattern */ + u8 reserved_0x114[20]; + u32 pll_periph1_pat0; /* 0x128 pll periph1 pattern0 */ + u32 pll_periph1_pat1; /* 0x12c pll periph1 pattern1 */ + u32 pll7_pat0; /* 0x130 pll7 (gpu) pattern0 */ + u32 pll7_pat1; /* 0x134 pll7 (gpu) pattern1 */ + u8 reserved_0x138[8]; + u32 pll3_pat0; /* 0x140 pll3 (video0) pattern0 */ + u32 pll3_pat1; /* 0x144 pll3 (video0) pattern1 */ + u32 pll_video1_pat0; /* 0x148 pll video1 pattern0 */ + u32 pll_video1_pat1; /* 0x14c pll video1 pattern1 */ + u8 reserved_0x150[8]; + u32 pll4_pat0; /* 0x158 pll4 (ve) pattern0 */ + u32 pll4_pat1; /* 0x15c pll4 (ve) pattern1 */ + u32 pll10_pat0; /* 0x160 pll10 (de) pattern0 */ + u32 pll10_pat1; /* 0x164 pll10 (de) pattern1 */ + u8 reserved_0x168[8]; + u32 pll9_pat0; /* 0x170 pll9 (hsic) pattern0 */ + u32 pll9_pat1; /* 0x174 pll9 (hsic) pattern1 */ + u32 pll2_pat0; /* 0x178 pll2 (audio) pattern0 */ + u32 pll2_pat1; /* 0x17c pll2 (audio) pattern1 */ + u8 reserved_0x180[384]; + u32 pll1_bias; /* 0x300 pll1 (cpux) bias */ + u8 reserved_0x304[12]; + u32 pll5_bias; /* 0x310 pll5 (ddr) bias */ + u8 reserved_0x314[12]; + u32 pll6_bias; /* 0x320 pll6 (periph0) bias */ + u8 reserved_0x324[4]; + u32 pll_periph1_bias; /* 0x328 pll periph1 bias */ + u8 reserved_0x32c[4]; + u32 pll7_bias; /* 0x330 pll7 (gpu) bias */ + u8 reserved_0x334[12]; + u32 pll3_bias; /* 0x340 pll3 (video0) bias */ + u8 reserved_0x344[4]; + u32 pll_video1_bias; /* 0x348 pll video1 bias */ + u8 reserved_0x34c[12]; + u32 pll4_bias; /* 0x358 pll4 (ve) bias */ + u8 reserved_0x35c[4]; + u32 pll10_bias; /* 0x360 pll10 (de) bias */ + u8 reserved_0x364[12]; + u32 pll9_bias; /* 0x370 pll9 (hsic) bias */ + u8 reserved_0x374[4]; + u32 pll2_bias; /* 0x378 pll2 (audio) bias */ + u8 reserved_0x37c[132]; + u32 pll1_tun; /* 0x400 pll1 (cpux) tunning */ + u8 reserved_0x404[252]; + u32 cpu_axi_cfg; /* 0x500 CPUX/AXI clock control*/ + u8 reserved_0x504[12]; + u32 psi_ahb1_ahb2_cfg; /* 0x510 PSI/AHB1/AHB2 clock control */ + u8 reserved_0x514[8]; + u32 ahb3_cfg; /* 0x51c AHB3 clock control */ + u32 apb1_cfg; /* 0x520 APB1 clock control */ + u32 apb2_cfg; /* 0x524 APB2 clock control */ + u8 reserved_0x528[24]; + u32 mbus_cfg; /* 0x540 MBUS clock control */ + u8 reserved_0x544[188]; + u32 de_clk_cfg; /* 0x600 DE clock control */ + u8 reserved_0x604[8]; + u32 de_gate_reset; /* 0x60c DE gate/reset control */ + u8 reserved_0x610[16]; + u32 di_clk_cfg; /* 0x620 DI clock control */ + u8 reserved_0x024[8]; + u32 di_gate_reset; /* 0x62c DI gate/reset control */ + u8 reserved_0x630[64]; + u32 gpu_clk_cfg; /* 0x670 GPU clock control */ + u8 reserved_0x674[8]; + u32 gpu_gate_reset; /* 0x67c GPU gate/reset control */ + u32 ce_clk_cfg; /* 0x680 CE clock control */ + u8 reserved_0x684[8]; + u32 ce_gate_reset; /* 0x68c CE gate/reset control */ + u32 ve_clk_cfg; /* 0x690 VE clock control */ + u8 reserved_0x694[8]; + u32 ve_gate_reset; /* 0x69c VE gate/reset control */ + u8 reserved_0x6a0[16]; + u32 emce_clk_cfg; /* 0x6b0 EMCE clock control */ + u8 reserved_0x6b4[8]; + u32 emce_gate_reset; /* 0x6bc EMCE gate/reset control */ + u32 vp9_clk_cfg; /* 0x6c0 VP9 clock control */ + u8 reserved_0x6c4[8]; + u32 vp9_gate_reset; /* 0x6cc VP9 gate/reset control */ + u8 reserved_0x6d0[60]; + u32 dma_gate_reset; /* 0x70c DMA gate/reset control */ + u8 reserved_0x710[12]; + u32 msgbox_gate_reset; /* 0x71c Message Box gate/reset control */ + u8 reserved_0x720[12]; + u32 spinlock_gate_reset;/* 0x72c Spinlock gate/reset control */ + u8 reserved_0x730[12]; + u32 hstimer_gate_reset; /* 0x73c HS Timer gate/reset control */ + u32 avs_gate_reset; /* 0x740 AVS gate/reset control */ + u8 reserved_0x744[72]; + u32 dbgsys_gate_reset; /* 0x78c Debugging system gate/reset control */ + u8 reserved_0x790[12]; + u32 psi_gate_reset; /* 0x79c PSI gate/reset control */ + u8 reserved_0x7a0[12]; + u32 pwm_gate_reset; /* 0x7ac PWM gate/reset control */ + u8 reserved_0x7b0[12]; + u32 iommu_gate_reset; /* 0x7bc IOMMU gate/reset control */ + u8 reserved_0x7c0[64]; + u32 dram_clk_cfg; /* 0x800 DRAM clock control */ + u32 mbus_gate; /* 0x804 MBUS gate control */ + u8 reserved_0x808[4]; + u32 dram_gate_reset; /* 0x80c DRAM gate/reset control */ + u32 nand0_clk_cfg; /* 0x810 NAND0 clock control */ + u32 nand1_clk_cfg; /* 0x814 NAND1 clock control */ + u8 reserved_0x818[20]; + u32 nand_gate_reset; /* 0x82c NAND gate/reset control */ + u32 sd0_clk_cfg; /* 0x830 MMC0 clock control */ + u32 sd1_clk_cfg; /* 0x834 MMC1 clock control */ + u32 sd2_clk_cfg; /* 0x838 MMC2 clock control */ + u8 reserved_0x83c[16]; + u32 sd_gate_reset; /* 0x84c MMC gate/reset control */ + u8 reserved_0x850[188]; + u32 uart_gate_reset; /* 0x90c UART gate/reset control */ + u8 reserved_0x910[12]; + u32 twi_gate_reset; /* 0x91c I2C gate/reset control */ + u8 reserved_0x920[28]; + u32 scr_gate_reset; /* 0x93c SCR gate/reset control */ + u32 spi0_clk_cfg; /* 0x940 SPI0 clock control */ + u32 spi1_clk_cfg; /* 0x944 SPI1 clock control */ + u8 reserved_0x948[36]; + u32 spi_gate_reset; /* 0x96c SPI gate/reset control */ + u8 reserved_0x970[12]; + u32 emac_gate_reset; /* 0x97c EMAC gate/reset control */ + u8 reserved_0x980[48]; + u32 ts_clk_cfg; /* 0x9b0 TS clock control */ + u8 reserved_0x9b4[8]; + u32 ts_gate_reset; /* 0x9bc TS gate/reset control */ + u32 irtx_clk_cfg; /* 0x9c0 IR TX clock control */ + u8 reserved_0x9c4[8]; + u32 irtx_gate_reset; /* 0x9cc IR TX gate/reset control */ + u8 reserved_0x9d0[44]; + u32 ths_gate_reset; /* 0x9fc THS gate/reset control */ + u8 reserved_0xa00[12]; + u32 i2s3_clk_cfg; /* 0xa0c I2S3 clock control */ + u32 i2s0_clk_cfg; /* 0xa10 I2S0 clock control */ + u32 i2s1_clk_cfg; /* 0xa14 I2S1 clock control */ + u32 i2s2_clk_cfg; /* 0xa18 I2S2 clock control */ + u32 i2s_gate_reset; /* 0xa1c I2S gate/reset control */ + u32 spdif_clk_cfg; /* 0xa20 SPDIF clock control */ + u8 reserved_0xa24[8]; + u32 spdif_gate_reset; /* 0xa2c SPDIF gate/reset control */ + u8 reserved_0xa30[16]; + u32 dmic_clk_cfg; /* 0xa40 DMIC clock control */ + u8 reserved_0xa44[8]; + u32 dmic_gate_reset; /* 0xa4c DMIC gate/reset control */ + u8 reserved_0xa50[16]; + u32 ahub_clk_cfg; /* 0xa60 Audio HUB clock control */ + u8 reserved_0xa64[8]; + u32 ahub_gate_reset; /* 0xa6c Audio HUB gate/reset control */ + u32 usb0_clk_cfg; /* 0xa70 USB0(OTG) clock control */ + u32 usb1_clk_cfg; /* 0xa74 USB1(XHCI) clock control */ + u8 reserved_0xa78[4]; + u32 usb3_clk_cfg; /* 0xa78 USB3 clock control */ + u8 reserved_0xa80[12]; + u32 usb_gate_reset; /* 0xa8c USB gate/reset control */ + u8 reserved_0xa90[32]; + u32 pcie_ref_clk_cfg; /* 0xab0 PCIE REF clock control */ + u32 pcie_axi_clk_cfg; /* 0xab4 PCIE AXI clock control */ + u32 pcie_aux_clk_cfg; /* 0xab8 PCIE AUX clock control */ + u32 pcie_gate_reset; /* 0xabc PCIE gate/reset control */ + u8 reserved_0xac0[64]; + u32 hdmi_clk_cfg; /* 0xb00 HDMI clock control */ + u32 hdmi_slow_clk_cfg; /* 0xb04 HDMI slow clock control */ + u8 reserved_0xb08[8]; + u32 hdmi_cec_clk_cfg; /* 0xb10 HDMI CEC clock control */ + u8 reserved_0xb14[8]; + u32 hdmi_gate_reset; /* 0xb1c HDMI gate/reset control */ + u8 reserved_0xb20[60]; + u32 tcon_top_gate_reset;/* 0xb5c TCON TOP gate/reset control */ + u32 tcon_lcd0_clk_cfg; /* 0xb60 TCON LCD0 clock control */ + u8 reserved_0xb64[24]; + u32 tcon_lcd_gate_reset;/* 0xb7c TCON LCD gate/reset control */ + u32 tcon_tv0_clk_cfg; /* 0xb80 TCON TV0 clock control */ + u8 reserved_0xb84[24]; + u32 tcon_tv_gate_reset; /* 0xb9c TCON TV gate/reset control */ + u8 reserved_0xba0[96]; + u32 csi_misc_clk_cfg; /* 0xc00 CSI MISC clock control */ + u32 csi_top_clk_cfg; /* 0xc04 CSI TOP clock control */ + u32 csi_mclk_cfg; /* 0xc08 CSI Master clock control */ + u8 reserved_0xc0c[32]; + u32 csi_gate_reset; /* 0xc2c CSI gate/reset control */ + u8 reserved_0xc30[16]; + u32 hdcp_clk_cfg; /* 0xc40 HDCP clock control */ + u8 reserved_0xc44[8]; + u32 hdcp_gate_reset; /* 0xc4c HDCP gate/reset control */ + u8 reserved_0xc50[688]; + u32 ccu_sec_switch; /* 0xf00 CCU security switch */ + u32 pll_lock_dbg_ctrl; /* 0xf04 PLL lock debugging control */ +}; + +/* pll6 bit field */ +#define CCM_PLL6_CTRL_N_SHIFT 8 +#define CCM_PLL6_CTRL_N_MASK (0xff << CCM_PLL6_CTRL_N_SHIFT) +#define CCM_PLL6_CTRL_DIV1_SHIFT 0 +#define CCM_PLL6_CTRL_DIV1_MASK (0x1 << CCM_PLL6_CTRL_DIV1_SHIFT) +#define CCM_PLL6_CTRL_DIV2_SHIFT 1 +#define CCM_PLL6_CTRL_DIV2_MASK (0x1 << CCM_PLL6_CTRL_DIV2_SHIFT) + +/* apb2 bit field */ +#define APB2_CLK_SRC_OSC24M (0x0 << 24) +#define APB2_CLK_SRC_OSC32K (0x1 << 24) +#define APB2_CLK_SRC_PSI (0x2 << 24) +#define APB2_CLK_SRC_PLL6 (0x3 << 24) +#define APB2_CLK_SRC_MASK (0x3 << 24) +#define APB2_CLK_RATE_N_1 (0x0 << 8) +#define APB2_CLK_RATE_N_2 (0x1 << 8) +#define APB2_CLK_RATE_N_4 (0x2 << 8) +#define APB2_CLK_RATE_N_8 (0x3 << 8) +#define APB2_CLK_RATE_N_MASK (3 << 8) +#define APB2_CLK_RATE_M(m) (((m)-1) << 0) +#define APB2_CLK_RATE_M_MASK (3 << 0) + +/* Module gate/reset shift*/ +#define RESET_SHIFT (16) + +/* MMC clock bit field */ +#define CCM_MMC_CTRL_M(x) ((x) - 1) +#define CCM_MMC_CTRL_N(x) ((x) << 8) +#define CCM_MMC_CTRL_OSCM24 (0x0 << 24) +#define CCM_MMC_CTRL_PLL6X2 (0x1 << 24) +#define CCM_MMC_CTRL_PLL_PERIPH2X2 (0x2 << 24) +#define CCM_MMC_CTRL_ENABLE (0x1 << 31) +/* H6 doesn't have these delays */ +#define CCM_MMC_CTRL_OCLK_DLY(a) ((void) (a), 0) +#define CCM_MMC_CTRL_SCLK_DLY(a) ((void) (a), 0) + +#ifndef __ASSEMBLY__ +void clock_set_pll1(unsigned int hz); +unsigned int clock_get_pll6(void); +#endif + +#endif /* _SUNXI_CLOCK_SUN50I_H6_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h index caec865264..08be963e8e 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu.h +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -9,6 +9,8 @@

#if defined(CONFIG_MACH_SUN9I) #include <asm/arch/cpu_sun9i.h> +#elif defined(CONFIG_MACH_SUN50I_H6) +#include <asm/arch/cpu_sun50i_h6.h> #else #include <asm/arch/cpu_sun4i.h> #endif diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h new file mode 100644 index 0000000000..8421f7637c --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2017 Icenowy Zheng icenowy@aosc.io + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CPU_SUN50I_H6_H +#define _SUNXI_CPU_SUN50I_H6_H + +#define SUNXI_SRAM_A1_BASE 0x00020000 +#define SUNXI_SRAM_C_BASE 0x00028000 +#define SUNXI_SRAM_A2_BASE 0x00100000 + +#define SUNXI_DE3_BASE 0x01000000 +#define SUNXI_SS_BASE 0x01904000 +#define SUNXI_EMCE_BASE 0x01905000 + +#define SUNXI_SRAMC_BASE 0x03000000 +#define SUNXI_CCM_BASE 0x03001000 +#define SUNXI_DMA_BASE 0x03002000 +/* SID address space starts at 0x03006000, but e-fuse is at offset 0x200 */ +#define SUNXI_SIDC_BASE 0x03006000 +#define SNUXI_SID_BASE 0x03006200 +#define SUNXI_TIMER_BASE 0x03009000 +#define SUNXI_PIO_BASE 0x0300B000 +#define SUNXI_PSI_BASE 0x0300C000 + +#define SUNXI_GIC400_BASE 0x03020000 +#define SUNXI_IOMMU_BASE 0x030F0000 + +#define SUNXI_DRAM_COM_BASE 0x04002000 +#define SUNXI_DRAM_CTL0_BASE 0x04003000 +#define SUNXI_DRAM_PHY0_BASE 0x04005000 +#define SUNXI_NFC_BASE 0x04011000 +#define SUNXI_MMC0_BASE 0x04020000 +#define SUNXI_MMC1_BASE 0x04021000 +#define SUNXI_MMC2_BASE 0x04002000 + +#define SUNXI_UART0_BASE 0x05000000 +#define SUNXI_UART1_BASE 0x05000400 +#define SUNXI_UART2_BASE 0x05000800 +#define SUNXI_UART3_BASE 0x05000C00 +#define SUNXI_TWI0_BASE 0x05002000 +#define SUNXI_TWI1_BASE 0x05002400 +#define SUNXI_TWI2_BASE 0x05002800 +#define SUNXI_TWI3_BASE 0x05002C00 +#define SUNXI_SPI0_BASE 0x05010000 +#define SUNXI_SPI1_BASE 0x05011000 +#define SUNXI_GMAC_BASE 0x05020000 +#define SUNXI_USB0_BASE 0x05100000 +#define SUNXI_XHCI_BASE 0x05200000 +#define SUNXI_USB3_BASE 0x05311000 +#define SUNXI_PCIE_BASE 0x05400000 + +#define SUNXI_HDMI_BASE 0x06000000 +#define SUNXI_TCON_TOP_BASE 0x06510000 +#define SUNXI_TCON_LCD0_BASE 0x06511000 +#define SUNXI_TCON_TV0_BASE 0x06515000 + +#define SUNXI_RTC_BASE 0x07000000 +#define SUNXI_R_CPUCFG_BASE 0x07000400 +#define SUNXI_PRCM_BASE 0x07010000 +#define SUNXI_R_PIO_BASE 0x07022000 +#define SUNXI_R_UART_BASE 0x07080000 +#define SUNXI_R_TWI_BASE 0x07081400 + +#ifndef __ASSEMBLY__ +void sunxi_board_init(void); +void sunxi_reset(void); +int sunxi_get_sid(unsigned int *sid); +#endif + +#endif /* _SUNXI_CPU_SUN9I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 24f85206c8..5acc3033f5 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -198,6 +198,7 @@ enum sunxi_gpio_number { #define SUN6I_GPH_TWI2 2 #define SUN6I_GPH_UART0 2 #define SUN9I_GPH_UART0 2 +#define SUN50I_H6_GPH_UART0 2

#define SUNXI_GPI_SDC3 2 #define SUN7I_GPI_TWI3 3 diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index 69f737f3bf..4fce9218ff 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -46,7 +46,7 @@ struct sunxi_mmc { u32 chda; /* 0x90 */ u32 cbda; /* 0x94 */ u32 res2[26]; -#ifdef CONFIG_SUNXI_GEN_SUN6I +#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6) u32 res3[64]; #endif u32 fifo; /* 0x100 / 0x200 FIFO access address */ diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h index ccdf942534..938067924e 100644 --- a/arch/arm/include/asm/arch-sunxi/timer.h +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -77,7 +77,7 @@ struct sunxi_timer_reg { struct sunxi_tgp tgp[4]; u8 res5[8]; u32 cpu_cfg; -#elif defined(CONFIG_SUNXI_GEN_SUN6I) +#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6) u8 res3[16]; struct sunxi_wdog wdog[5]; /* We have 5 watchdogs */ #endif diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d944e7c015..1513a3294f 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -188,6 +188,10 @@ config MACH_SUN50I_H5 select FIT select SPL_LOAD_FIT

+config MACH_SUN50I_H6 + bool "sun50i (Allwinner H6)" + select ARM64 + endchoice

# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" @@ -403,6 +407,7 @@ config SYS_CLK_FREQ default 1008000000 if MACH_SUN8I default 1008000000 if MACH_SUN9I default 816000000 if MACH_SUN50I + default 1320000000 if MACH_SUN50I_H6

config SYS_CONFIG_NAME default "sun4i" if MACH_SUN4I @@ -412,6 +417,7 @@ config SYS_CONFIG_NAME default "sun8i" if MACH_SUN8I default "sun9i" if MACH_SUN9I default "sun50i" if MACH_SUN50I + default "sun50i" if MACH_SUN50I_H6

config SYS_BOARD default "sunxi" @@ -617,6 +623,7 @@ config VIDEO_SUNXI depends on !MACH_SUN8I_V3S depends on !MACH_SUN9I depends on !MACH_SUN50I + depends on !MACH_SUN50I_H6 select VIDEO imply VIDEO_DT_SIMPLEFB default y diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 2a3c379b72..3fe68e083b 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -13,7 +13,7 @@ obj-y += clock.o obj-y += cpu_info.o obj-y += dram_helpers.o obj-y += pinmux.o -ifndef CONFIG_MACH_SUN9I +ifeq ($(CONFIG_MACH_SUN9I)$(CONFIG_MACH_SUN50I_H6),) obj-y += usb_phy.o endif obj-$(CONFIG_MACH_SUN6I) += prcm.o @@ -33,6 +33,7 @@ else obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o endif obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o +obj-$(CONFIG_MACH_SUN50I_H6) += clock_sun50i_h6.o

obj-$(CONFIG_AXP152_POWER) += pmic_bus.o obj-$(CONFIG_AXP209_POWER) += pmic_bus.o diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 0c60ee04da..dcdc430d3d 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -108,6 +108,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN50I_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN50I_GPB_UART0); sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I_H6) + sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H6_GPH_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H6_GPH_UART0); + sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T) sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0); @@ -293,7 +297,7 @@ void reset_cpu(ulong addr) /* sun5i sometimes gets stuck without this */ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode); } -#elif defined(CONFIG_SUNXI_GEN_SUN6I) +#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6) static const struct sunxi_wdog *wdog = ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;

diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c new file mode 100644 index 0000000000..152fcee255 --- /dev/null +++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c @@ -0,0 +1,39 @@ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> + +void clock_init_uart(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + /* uart clock source is apb2 */ + writel(APB2_CLK_SRC_OSC24M| + APB2_CLK_RATE_N_1| + APB2_CLK_RATE_M(1), + &ccm->apb2_cfg); + + /* open the clock for uart */ + setbits_le32(&ccm->uart_gate_reset, + 1 << (CONFIG_CONS_INDEX - 1)); + + /* deassert uart reset */ + setbits_le32(&ccm->uart_gate_reset, + 1 << (RESET_SHIFT + CONFIG_CONS_INDEX - 1)); +} + +unsigned int clock_get_pll6(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + uint32_t rval = readl(&ccm->pll6_cfg); + int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT); + int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >> + CCM_PLL6_CTRL_DIV1_SHIFT) + 1; + int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >> + CCM_PLL6_CTRL_DIV2_SHIFT) + 1; + /* The register defines PLL6-4X, not plain PLL6 */ + return 24000000 * n / div1 / div2 / 4; +} diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c index 25a5ec26a0..90aff395dc 100644 --- a/arch/arm/mach-sunxi/cpu_info.c +++ b/arch/arm/mach-sunxi/cpu_info.c @@ -97,6 +97,8 @@ int print_cpuinfo(void) puts("CPU: Allwinner A64 (SUN50I)\n"); #elif defined CONFIG_MACH_SUN50I_H5 puts("CPU: Allwinner H5 (SUN50I)\n"); +#elif defined CONFIG_MACH_SUN50I_H6 + puts("CPU: Allwinner H6 (SUN50I)\n"); #else #warning Please update cpu_info.c with correct CPU information puts("CPU: SUNXI Family\n"); diff --git a/board/sunxi/board.c b/board/sunxi/board.c index dcacdf3e62..3a85087d9a 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -729,7 +729,7 @@ int misc_init_r(void)

setup_environment(gd->fdt_blob);

-#ifndef CONFIG_MACH_SUN9I +#if !defined(CONFIG_MACH_SUN9I) && !defined(CONFIG_MACH_SUN50I_H6) ret = sunxi_usb_phy_probe(); if (ret) return ret; diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 4edb4be46c..e176bdcaa9 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -70,10 +70,12 @@ static int mmc_resource_init(int sdc_no) priv->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE; priv->mclkreg = &ccm->sd2_clk_cfg; break; +#ifdef SUNXI_MMC3_BASE case 3: priv->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE; priv->mclkreg = &ccm->sd3_clk_cfg; break; +#endif default: printf("Wrong mmc number %d\n", sdc_no); return -1; @@ -116,6 +118,9 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz) #ifdef CONFIG_MACH_SUN9I pll = CCM_MMC_CTRL_PLL_PERIPH0; pll_hz = clock_get_pll4_periph0(); +#elif defined(CONFIG_MACH_SUN50I_H6) + pll = CCM_MMC_CTRL_PLL6X2; + pll_hz = clock_get_pll6() * 2; #else pll = CCM_MMC_CTRL_PLL6; pll_hz = clock_get_pll6(); @@ -504,6 +509,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)

/* config ahb clock */ debug("init mmc %d clock and io\n", sdc_no); +#if !defined(CONFIG_MACH_SUN50I_H6) setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));

#ifdef CONFIG_SUNXI_GEN_SUN6I @@ -514,6 +520,11 @@ struct mmc *sunxi_mmc_init(int sdc_no) /* sun9i has a mmc-common module, also set the gate and reset there */ writel(SUNXI_MMC_COMMON_CLK_GATE | SUNXI_MMC_COMMON_RESET, SUNXI_MMC_COMMON_BASE + 4 * sdc_no); +#endif +#else /* CONFIG_MACH_SUN50I_H6 */ + setbits_le32(&ccm->sd_gate_reset, 1 << sdc_no); + /* unassert reset */ + setbits_le32(&ccm->sd_gate_reset, 1 << (RESET_SHIFT + sdc_no)); #endif ret = mmc_set_mod_clk(priv, 24000000); if (ret) diff --git a/env/Kconfig b/env/Kconfig index 8c9d800f48..8fae66de90 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -410,7 +410,8 @@ config ENV_OFFSET hex "Environment Offset" depends on !ENV_IS_IN_UBI depends on !ENV_IS_NOWHERE - default 0x88000 if ARCH_SUNXI + default 0x88000 if ARCH_SUNXI && !MACH_SUN50I_H6 + default 0xe0000 if MACH_SUN50I_H6 help Offset from the start of the device (or partition)

diff --git a/include/configs/sun50i.h b/include/configs/sun50i.h index b7b67a1ddc..1b3e84c4e9 100644 --- a/include/configs/sun50i.h +++ b/include/configs/sun50i.h @@ -18,8 +18,13 @@

#define CONFIG_SUNXI_USB_PHYS 1

+#ifndef CONFIG_MACH_SUN50I_H6 #define GICD_BASE 0x1c81000 #define GICC_BASE 0x1c82000 +#else +#define GICD_BASE 0x3021000 +#define GICC_BASE 0x3022000 +#endif

/* * Include common sunxi configuration where most the settings are diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 4391a8cbc8..214e1a49ac 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -32,7 +32,7 @@ # define CONFIG_MACH_TYPE_COMPAT_REV 1 #endif

-#ifdef CONFIG_ARM64 +#if defined(CONFIG_ARM64) && !defined(CONFIG_MACH_SUN50I_H6) #define CONFIG_BUILD_TARGET "u-boot.itb" #endif

@@ -98,6 +98,9 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 #define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ +#elif defined(CONFIG_MACH_SUN50I_H6) +#define CONFIG_SYS_INIT_RAM_ADDR 0x20000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x08000 #else #define CONFIG_SYS_INIT_RAM_ADDR 0x0 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */