[PATCH] ARM: configs: imx8mm: Sync i.MX8M Mini Toradex Verdin and Menlo board configs
Synchronize the i.MX8M Mini Toradex Verdin based Menlo board config with i.MX8M Mini Toradex Verdin carrier board. This enables DM MDIO, eMMC HS modes, TMU for thermal monitoring, LTO and multiple commands (hexdump, pmic, read, time).
Signed-off-by: Marek Vasut marex@denx.de --- Cc: Marek Vasut marex@denx.de Cc: Olaf Mandel o.mandel@menlosystems.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- configs/imx8mm-mx8menlo_defconfig | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-mx8menlo_defconfig index 0a374aab06d..0bd852a77b9 100644 --- a/configs/imx8mm-mx8menlo_defconfig +++ b/configs/imx8mm-mx8menlo_defconfig @@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx8mm-mx8menlo" CONFIG_SPL_TEXT_BASE=0x7E1000 CONFIG_TARGET_IMX8MM_MX8MENLO=y CONFIG_SYS_PROMPT="Verdin iMX8MM # " +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y @@ -24,6 +25,7 @@ CONFIG_ENV_OFFSET_REDUND=0xFFFFDE00 CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x80000000 +CONFIG_LTO=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 @@ -61,18 +63,23 @@ CONFIG_SYS_PBSIZE=2081 CONFIG_CMD_ASKENV=y # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_CRC32 is not set +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_READ=y CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_UUID=y +CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_BTRFS=y CONFIG_CMD_EXT4_WRITE=y @@ -87,7 +94,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FEC" +CONFIG_ETHPRIME="eth0" CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 @@ -104,11 +111,19 @@ CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_MDIO=y CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_SPL_PHY=y @@ -131,6 +146,7 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y +CONFIG_IMX_TMU=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y @@ -143,4 +159,4 @@ CONFIG_CI_UDC=y CONFIG_SDP_LOADADDR=0x40400000 CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_IMX_WATCHDOG=y -CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_HEXDUMP=y
On 4/6/2023 7:51 AM, Marek Vasut wrote:
Synchronize the i.MX8M Mini Toradex Verdin based Menlo board config with i.MX8M Mini Toradex Verdin carrier board. This enables DM MDIO, eMMC HS modes, TMU for thermal monitoring, LTO and multiple commands (hexdump, pmic, read, time).
Signed-off-by: Marek Vasut marex@denx.de
Reviewed-by: Peng Fan peng.fan@nxp.com
Cc: Marek Vasut marex@denx.de Cc: Olaf Mandel o.mandel@menlosystems.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de
configs/imx8mm-mx8menlo_defconfig | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-mx8menlo_defconfig index 0a374aab06d..0bd852a77b9 100644 --- a/configs/imx8mm-mx8menlo_defconfig +++ b/configs/imx8mm-mx8menlo_defconfig @@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx8mm-mx8menlo" CONFIG_SPL_TEXT_BASE=0x7E1000 CONFIG_TARGET_IMX8MM_MX8MENLO=y CONFIG_SYS_PROMPT="Verdin iMX8MM # " +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y @@ -24,6 +25,7 @@ CONFIG_ENV_OFFSET_REDUND=0xFFFFDE00 CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x80000000 +CONFIG_LTO=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 @@ -61,18 +63,23 @@ CONFIG_SYS_PBSIZE=2081 CONFIG_CMD_ASKENV=y # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_CRC32 is not set +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_READ=y CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_UUID=y +CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_BTRFS=y CONFIG_CMD_EXT4_WRITE=y @@ -87,7 +94,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FEC" +CONFIG_ETHPRIME="eth0" CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 @@ -104,11 +111,19 @@ CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_MDIO=y CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_SPL_PHY=y @@ -131,6 +146,7 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y +CONFIG_IMX_TMU=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y @@ -143,4 +159,4 @@ CONFIG_CI_UDC=y CONFIG_SDP_LOADADDR=0x40400000 CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_IMX_WATCHDOG=y -CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_HEXDUMP=y
participants (2)
-
Marek Vasut -
Peng Fan